I've had my nautilus Mini and istick for about 2 months now, and have gone through a few atomizer replacements, only to notice that none of them have had as high of a wattage as the one that originally came packaged with the tank (that one went up to 15.9 watts, and the one I am using currently only vapes at 14.4.) Is there any way I could fix this? Do I need to clean a connector or something? Any help would be appreciated!
Nautilus Mini/ eLeaf iStick Wattage Issue?
- Thread starter ajbond916
- Start date
- th_trl_thread_readers 0
- Status
No fix, other than dropping watts to maybe 13 or less, I run on my Istick 50w at around 9 to 10w, but the cartamizers is the problem, they burn out quickly or the wicking burns giving burnt taste. I have had caromizers only last a few hours & some a day or so. Some of the problem is eliquid to thick won't wick well.
let me see if I understand what you're asking. with the new coil that you put in your Nautilus mini you can't reach as high of a wattage as previous coils? That should have nothing to do with your coils and more with your mod. what type of istick do you have? What wattage does it go up to?
So your istick maxes out at 20w, ok. If I remember correctly the Nautilus coils
are 1.8 ohms. Check the side of the coils for the resistance. See what it says compared to one where you could the higher wattage out of. Also make sure your mod is fully charged. I know most mods will limit wattage based on what the battery can provide at the time you press the fire button. Further more make sure your 510 connection is making good contact with your clearo, alcohol and a cotton swab works for cleaning my connections. When I used my Nautilus Mini I could only push 12 watts max or I would start burning my eliquid. I'm surprised you're pushing over 14 watts.
are 1.8 ohms. Check the side of the coils for the resistance. See what it says compared to one where you could the higher wattage out of. Also make sure your mod is fully charged. I know most mods will limit wattage based on what the battery can provide at the time you press the fire button. Further more make sure your 510 connection is making good contact with your clearo, alcohol and a cotton swab works for cleaning my connections. When I used my Nautilus Mini I could only push 12 watts max or I would start burning my eliquid. I'm surprised you're pushing over 14 watts.
hey also after cleaning done try putting just a small dab of dielectric grease on coil pin connection & on tank connection to Istick this may help for connection problems.
- Status
Similar threads
- Locked
- Locked
