Need assistance again.

[Johnsonzzx]

So I've fixed the battery problem, now the current issue is.
I've using a velocity dual coil, i just got clapton coils running at 0.3 ohms.
HOwever, it just keeps spitting and popping no matter what.
I've tried wicking with less cotton, dripping less juice.
no matter what it just keeps spitting and the velocity rda gets very warm.
Any idea?

 

[Bad Ninja]

If your wicks are blocking the airflow from the holes to the drip tip, it will spit.

 

[Johnsonzzx]

If your wicks are blocking the airflow from the holes to the drip tip, it will spit.

but i've like reduced the cotton and it's not much of a cotton, i'm not sure how it will block the airflow?
Sorry I'm quite new

 

[93gc40]

Whats the mod? If regulated whats the power set at? What size wires are the coils Made from?

 

[Johnsonzzx]

Whats the mod? If regulated whats the power set at? What size wires are the coils Made from?

I'm using Kbox mini plat. I've tried using it at 30-55 watts. Spitting issue still persists.
I'm not sure about the size wires as I've bought premade coils.
I have a feeling it does relate to the coil as I was using stock coils from the rda and it didnt really spit

 

[93gc40]

What ohm were the stock coils????? I thought the velocity was an RBA, technically there would NOT be a stock coil. There might be some coils the seller included.
Since you don't know what wire you have you cant determine how hot the wires are getting. Plug what you know and can estimate into a calculator like Steam-engine.org. You might be able to figure out what you are dealing with. Claptons are big coils that Hold a lot of juice, they can to be a little spittier than standard and even twisted wire coils normally.

 

[Hans Wermhat]

A pic of your build would be helpful, but 93gc40 is right. Claptons DO spit a lil bit. They also make a ton of flavor and huge clouds though.

 

[Kprthevapr]

Are your coils close to the center of the atty? If the are, move em closer to the air holes.

 

[Johnsonzzx]

A pic of your build would be helpful, but 93gc40 is right. Claptons DO spit a lil bit. They also make a ton of flavor and huge clouds though.

I'll try to post them when I'm home!

 

[Johnsonzzx]

Are your coils close to the center of the atty? If the are, move em closer to the air holes.
View attachment 527446

Oh yes, my coils are very close to the center of atty. I have no idea about how the placement of coils can affect anything. Will try to move them when homed! Thanks

 

[Kprthevapr]

Oh yes, my coils are very close to the center of atty. I have no idea about how the placement of coils can affect anything. Will try to move them when homed! Thanks

If your coils are really close to the center, when you draw on it, you'll suck juice and get spit back.

 

[Kprthevapr]

Anything we can do to help a fellow vaper
Always ask, it never hurts

 

[Johnsonzzx]

Anything we can do to help a fellow vaper
Always ask, it never hurts

Thanks a lot man!
I'm actuay really new to vaping and I'm glad that there're nice veterans like you helping out by replying

 

[Kprthevapr]

Thanks a lot man!
I'm actuay really new to vaping and I'm glad that there're nice veterans like you helping out by replying

That's what Mama's do, we help you young whippersnappers out

 

[Bad Ninja]

Thanks a lot man!

 

[93gc40]

Draw an imaginary straight line from the air inlets and the air outlet, of the atty. Thats the path of the airflow The closer to the center of that line the better the vaporization will be. BUT, that also mean the splatter that always occurs also has an easier path OUT of the atty. So the farther you get the coils from the outlet, the better.

 

[Johnsonzzx]

A pic of your build would be helpful, but 93gc40 is right. Claptons DO spit a lil bit. They also make a ton of flavor and huge clouds though.

Are your coils close to the center of the atty? If the are, move em closer to the air holes.
View attachment 527446

Draw an imaginary straight line from the air inlets and the air outlet, of the atty. Thats the path of the airflow The closer to the center of that line the better the vaporization will be. BUT, that also mean the splatter that always occurs also has an easier path OUT of the atty. So the farther you get the coils from the outlet, the better.

This is how it is like. It is still spitting. I'm getting not much vapor but a .... ton of juice in my mouth. :l

 

[Johnsonzzx]

It's so frustrating. I just got this RDA and I've tried everything but it just keeps popping and spitting juice out no matter how much or how less cotton i put, i also adjusted the coils to the point where it's not so close to the center. I really have no clue what to do anymore. :l

 

[93gc40]

Next step is longer and maybe a bent drip tip. Also don't drip ON the coils. Could just be that clapton coil, at least, those coils are not going to work for you. Could try removing a wrap from each coil, might help.

 

[Kprthevapr]

It's so frustrating. I just got this RDA and I've tried everything but it just keeps popping and spitting juice out no matter how much or how less cotton i put, i also adjusted the coils to the point where it's not so close to the center. I really have no clue what to do anymore. :l

Step back and take a deep breath...it's not rocket surgery
Do you have any other wire besides the Clapton wire? 26g is a good size for most builds.