Need Help W/New Gus22 and GusTele

[badinfluence357]

The brass pole will change everything... I had the same issues at the begining pushing certain ohms now I get power out this baby... also make sure you try to hit low omh coil wraps .9 .8. It hits great with the brass upgrades.

Good luck!!

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

Badinfluence357 i contacted katerina and she said they dont make the brass switch anymore...i dint know why but it sucks lol. Btw if i buy just the brass pole from ea you think it will fit the insulator thats akready connected on my gus? I just need to know if its big enough so i can just sand it down and not buy the insulator from them anymore...

its not going to fit the gus with out the insulator that go's with the EA mod....I told you to use the contact us and send them a message so that they can sell you the plastic along with the pole ...I just got 2 sets yesterday check the site..

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

this website has the new brass adjustible pole for the paps but also fits the Gus...they're out of stock, just keep your eyes on the site...this is a nice pole for performace enhancement...good luck!!

http://www.vapourart.com/en/product/gp-telescopic-centre-post-version-21

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

its not going to fit the gus with out the insulator that go's with the EA mod....I told you to use the contact us and send them a message so that they can sell you the plastic along with the pole ...I just got 2 sets yesterday check the site..

Sent from my SCH-R910 using Tapatalk 2

the brass button switch was a custom job done by gus...it wasnt for sale....the switch is for sale with the v2 mods but not with the brass button...I really don't know if he is planning to make them for sale in the near futher, I can't say...you can buy and use the gus22 switch which has a brass post button as well..


Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

What was shipping from finland? I need to do this.

I think it was about 12,00 euros for shipping.. it was a lil expensive for a post and plastic that probably cost cents to make, but it did what I needed it to do and brought up the value of my mod...lol

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

sorry for the other picturs had to clean up my old files. It appears I reached my storage limit I had on ECF.

Sent from my SCH-R910 using Tapatalk 2

 

[Harleyndn]

its not going to fit the gus with out the insulator that go's with the EA mod....I told you to use the contact us and send them a message so that they can sell you the plastic along with the pole ...I just got 2 sets yesterday check the site..

Sent from my SCH-R910 using Tapatalk 2

Wanna sell one set?, Jk, you probably dont, I'll probably try and get a set from them, thanks for the info

 

[Harleyndn]

Ok, now wondering if the paps switch would work on the gus. Its out of stock also, but might be a good prospect.

 

[PhreakySTS9]

Yes it will, all the parts are completely interchangeable!

BTW, picked up some brass screws before work but didn't have time to go and cut it down to fit it in my mod, and since I only have 18650's I can't use it until I do so. So tomorrow before work I get to pick up my new GGTS AND get my GUS up and working properly! Win win!

 

[PhreakySTS9]

Also, quick question for you badinfluence, although I have no plans to order the EA center post for mine, as I bought some brass screws yesterday and i'm going to grind one down today before work to fit, will the EA mod fit an 18650? Because you can only have a tiny bit stick out of the back of the poll and be able to fit an 18650, the screw as it comes will not even come CLOSE to being able to close, and I just wonder for other people's sake, if it can with that EA center pin. For those that use 18350's and 18490-50's it won't be an issue, but for those that like the big batts it may, it's hard to tell how far it sticks out by the pics.

 

[Koman]

View attachment 181545View attachment 181546View attachment 181547View attachment 181548

sorry for the other picturs had to clean up my old files. It appears I reached my storage limit I had on ECF.

Sent from my SCH-R910 using Tapatalk 2

He he, they look like cufflinks!

 

[badinfluence357]

Also, quick question for you badinfluence, although I have no plans to order the EA center post for mine, as I bought some brass screws yesterday and i'm going to grind one down today before work to fit, will the EA mod fit an 18650? Because you can only have a tiny bit stick out of the back of the poll and be able to fit an 18650, the screw as it comes will not even come CLOSE to being able to close, and I just wonder for other people's sake, if it can with that EA center pin. For those that use 18350's and 18490-50's it won't be an issue, but for those that like the big batts it may, it's hard to tell how far it sticks out by the pics.

on the gus I don't think you can use a 18650 with the ea post... its possible only if you grind the post to a very small size

Sent from my SCH-R910 using Tapatalk 2

 

[chieftechnicalwizard]

on the gus I don't think you can use a 18650 with the ea post... its possible only if you grind the post to a very small size

Sent from my SCH-R910 using Tapatalk 2

Will you post a pic of the ea center pin Gus cap? Thank you

*** Tapatalk tablet ***

 

[chieftechnicalwizard]

The brass pole will change everything... I had the same issues at the begining pushing certain ohms now I get power out this baby... also make sure you try to hit low omh coil wraps .9 .8. It hits great with the brass upgrades.
View attachment 181532View attachment 181533View attachment 181535
Good luck!!

Sent from my SCH-R910 using Tapatalk 2

Nevermind! I found it cheers

*** Tapatalk tablet ***

 

[phab3k]

so where can I order the new switch from? been keeping an eye on vapourart but they are never in stock. as soon as I replace this switch it will be a perfect mod.

 

[studiovap]

Contact Katrina at sales@atmomixani.gr
Or sand the battery contact in the switch to a dome and polish it, and replace the positive spring with a solid piece of brass rod.

 

[phab3k]

Contact Katrina at sales@atmomixani.gr
Or sand the batter contact in the switch to a dome and polish it, and replace the positive spring with a solid piece of brass rod.

I don't understand what you mean, do you have pics of what you are talking about?

 

[studiovap]

I don't understand what you mean, do you have pics of what you are talking about?

Domed negative switch contact on right
View attachment 181547


Solid positive battery contact

 

[phab3k]

Domed negative switch contact on right
View attachment 181547


Solid positive battery contact

o, I think I have a dome version, it isn't brass color, it's stainless steel color

 

[badinfluence357]

o, I think I have a dome version, it isn't brass color, it's stainless steel color

View attachment 192835

All you have to do now is remove the black insulator you don't need it...it will be just like the chi you switch with no insulator..it will shorten the throw and make better contact. Also if you need the floting brass top cap post and insulator I have a spare one I can sell you.

Sent from my SCH-R910 using Tapatalk 2