Need help with purchase

[irehc77]

I am a newbie and would like some help making the correct purchase. I am using a eGo C with vision clearomizers on it. I also have a Reo Grand that I am using Cisco LR 306 atomizers on. I have several questions.
What would be a good inexpensive atomizer to use on my eGo C for dripping to try out sample liquids?
How do I know when I need to clean my atomizers and how do I know if I burnt one that should be thrown out? Not really sure how long they last since I have only been vaping for 2 weeks now.

Also what would be a good long lasting atomizer to use on my Reo? I pretty much chain vape and would be willing to spend more to purchase a good atomizer for this. If there is one that a newbie would be able to re build maybe that would be the most cost effective way for me to go.

Sometimes I get very confused what to buy. This is all still fairly new to me and not sure bridged/non bridged etc.

Any help I would very much appreciate.
I do not have a voltage meter to know what volts the ego C is. The battery is the 1000mah and of course the Reo has the 3.7 volts battery.

Thank You for any help anyone can offer.

 

[ShayBabe15]

Hey! I recommend getting Kanger T3 tanks. They are re-build-able, last forever and are super easy to clean.
You need to clean your tanks, atty's, drip tips, etc. about two-three times a week. No more, no less. You'll want to dry-burn them once a week. Do no over do this.(If you don't know what dry-burning is, let me know) Sometimes people clean them when flavor is lost, they start to get a burnt/plastic taste..You'll get a feel for it.
You will definitely know when you have burned out of one of your atty's..it will taste awful. If you clean like you should, using either hot water or vodka, your tanks should last you a good three weeks or more. Especially the re-build-able ones

Your Reo is a 510/threaded..or 306/threaded. You're going to have to find out which one it is. I would again, use a Kanger T3. Don't use Stardusts or any of the old clearo's.

If you have anymore questions, let us know!

 

[irehc77]

Thanks ShayBabe15. I am pretty sure the Reo is both 510 and 306? I have a 306 LR Cisco atty on it now. But I thought both the 510 and 306 threads are the same.
Guess I will look on Youtube for a video how to clean the Cisco atomizer. I have been using it about 10 days now and have not cleaned it. I will sometimes get a little burnt flavor but still learning how to squonk with it so that may be my problem.
I will also check into the Kanger T3.

 

[unsure]

Im impressed that someone new ventured and took the smart leap into a excellent mod instead of the usual path of those starter kits. You know your attys too. For regular atty I moved from a 306 to the Cisco bridgeless 510 but RBAs are whats happening. I have a Hornet on my Woodvil and a Reomizer on my VVWoodvil (seen in the pic below. The A7 RBA is priced right for someone who wants try a RBA for the first time without a $$ commitment.

 

[ShayBabe15]

Lol, I would NOT quote me on anything about Reo's.
If you chain vape and your atty gets too hot, you'll get that taste no matter what. If you let it set for like five minutes, it should go away. If it persists, it may be time to clean it. I'm a chain vaper, too..so I understand.

Thanks ShayBabe15. I am pretty sure the Reo is both 510 and 306? I have a 306 LR Cisco atty on it now. But I thought both the 510 and 306 threads are the same.
Guess I will look on Youtube for a video how to clean the Cisco atomizer. I have been using it about 10 days now and have not cleaned it. I will sometimes get a little burnt flavor but still learning how to squonk with it so that may be my problem.
I will also check into the Kanger T3.

 

[Vapoor eyes er]

I am using a eGo C with vision clearomizers on it.

Have used the clearos and switched to the Vision brand Mini Vivi Nova as it's superior build quality- make absolute sure it's the Vision brand- my heads are lasting 8+ weeks and the only reason I change the head is because the wicks begin to shred. Of course the heads need to be maintained- wash and dry burn.

What would be a good inexpensive atomizer to use on my eGo C for dripping to try out sample liquids?

If it's only used for testing juices any 510 atty will work.

How do I know when I need to clean my atomizers and how do I know if I burnt one that should be thrown out?

When they begin tasting nasty or are not firing strongly. Best cleaning I know of is using Polident smokers denture cleaner.

Also what would be a good long lasting atomizer to use on my Reo? I pretty much chain vape and would be willing to spend more to purchase a good atomizer for this. If there is one that a newbie would be able to re build maybe that would be the most cost effective way for me to go.

I have no experience with the Reo but i know their are rebuild bale bottom feeder attys for it- very expensive. Chalice, Reomizer are a couple of names- people seem to favor the Chailce.

I do not have a voltage meter to know what volts the ego C is.

They fire @ 3.4 volts.

 

[Vapoor eyes er]

Here's a tutorial using Polident to clean the atty- a friend uses this method and swears by it:
http://www.e-cigarette-forum.com/fo...-510-cleaning-denture-cleaner-w-pictures.html

 

[tj99959]

For the no fuss out & about vape on your Reo, try these.
http://www.reosmods.com/index.php?p...category_id=20&option=com_virtuemart&Itemid=3

Oh, and I love my A7 mini's
http://www.empiremods.com/product_p/reba7mini.htm

 

[irehc77]

What would I do without my forum friends? Thank you all so very much. Now off to some vendors to make some purchases and also to the store to buy some denture cleaner! Was gonna go buy a bottle of Vodka but will try the denture cleaner!