Need RDA clone suggestions. Got ....ed over on a Infinite Tobh Clone from 101vapes

[omnipixel]

As title states, I need a new rda. I can only afford to purchase a clone. I currently have a tobeco patriot and the centerpost turns when I tighten down a lead, and I just received a Infinite TOBH clone from 101vapes and it's an absolute piece of ..... The Centerpost is having issues as well; it's completely stripped, can't tighten down the lead AT ALL. I've contacted 101vapes and the knew about the issue and still sold it so I'm praying I get a refund.

In the mean time, I really need a new rda to replace this Patriot. Any suggestions?

I've been looking at the following:

CiGreen Brass Monkee:
Brass Monkee RDA Clone - On9Stop.com

CiGreen Stillare:
Stillare RDA Clone - On9Stop.com

h-cigar TOBH:
HCigar TOBH Atty RDA Clone

I'm hesitant on ordering another TOBH but my friend had the EHPro version and it was FLAWLESS I loved it. I just can't seem to strike out lucky like others do and always end up with a piece of crap lol.

 

[lopenator]

I don't know anything about those clones, but I use IGO's, and I love them.

 

[Drizzledog]

^^^this^^^^

Ud igo's are rock solid for $15-20. I have the w and w4, both are great. Not quite as nice as my tobh & magma, but wwwaayyy cheaper. Clones are hit and miss. When you get a good one it defeats reasoning for getting an authentic. When you get a bad one, you end up spending authentic prices for a clone because you bought 2.

 

[joecil]

I have the following myself and all work great though some have better taste others stronger vaper and some with both. Original IGO-L, IGO-W (halo cap), IGO-M (as good as they get), FT TOBH (3 caps, copper, brass and stainless), FT Patriot (gold cap), 2 FT Omega (one gold cap, one stainless) and a CiGreen Stillare. I've not gotten or had a problem with any of them at this point.

I paid about $11 for the IGO L & W each but just got the IGO-M for $25 which is a really good RDA in my opinion. Most of these where in the $20 to $30 range with the exception of the TOBH with the 3 caps which was $45 and worth it as it is really good one.

 

[bsoplinger]

I like the smaller RDA types like the Igo-S (smaller version of Igo-L), the Smok squid (smaller version of the octopus) and A6 and mini A7. The tiny (relatively, they aren't that small) chamber makes for intense flavor. All are single coil designs and $15 or less.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[crxess]

First - 101 is reputable and takes care of legitimate customer complaints

Second - you need to learn - Tight is Tight - To tight is Broken

You only need to Capture the coil leads, not crush them.

 

[Dougk9589]

I have the cigreen stillare clone and it is pretty spot on to the authentic. I used an authentic for a day and honestly the quality on mine is very close though mine did not come with a drip tip which was slightly off putting.

 

[Marc411]

You won't go wrong with either the Brass Monkee or the Stillare.

The monkee is easy to build but you can only run duals, same thing with the Stillare but it has a nice deep deck.

If you ever want o run a single coil these won't be the RDA to use.

Quasar and Atomic are both good RDA's and give you the best of both worlds.

 

[joecil]

You won't go wrong with either the Brass Monkee or the Stillare.

The monkee is easy to build but you can only run duals, same thing with the Stillare but it has a nice deep deck.

If you ever want o run a single coil these won't be the RDA to use.

Quasar and Atomic are both good RDA's and give you the best of both worlds.

I simply turned my Stillare top air control section about half way around so nothing was open. I then drilled 3 holes using the slot as a guide. Now it drilled very easy unlike the IGO caps for example. I then took a dremel with a bit and cut the slot out as the others are. It now does single coils just fine. Oh and whole job took about 5 minutes with a vise, hand drill and dremel bit bit about the size of the holes drilled. Oh and it would work fine with just 3 evenly spaced holes instead of slotting it like I did.

 

[blueGrassTubb]

I have the following myself and all work great though some have better taste others stronger vaper and some with both. Original IGO-L, IGO-W (halo cap), IGO-M (as good as they get), FT TOBH (3 caps, copper, brass and stainless), FT Patriot (gold cap), 2 FT Omega (one gold cap, one stainless) and a CiGreen Stillare. I've not gotten or had a problem with any of them at this point.

I paid about $11 for the IGO L & W each but just got the IGO-M for $25 which is a really good RDA in my opinion. Most of these where in the $20 to $30 range with the exception of the TOBH with the 3 caps which was $45 and worth it as it is really good one.

I'd roll with either an Igo-M (which is friggin' awesome) or an Igo-W with a Halo top cap.

Both are great and don't cost much.

 

[Jhutt]

I have the following myself and all work great though some have better taste others stronger vaper and some with both. Original IGO-L, IGO-W (halo cap), IGO-M (as good as they get), FT TOBH (3 caps, copper, brass and stainless), FT Patriot (gold cap), 2 FT Omega (one gold cap, one stainless) and a CiGreen Stillare. I've not gotten or had a problem with any of them at this point.

I paid about $11 for the IGO L & W each but just got the IGO-M for $25 which is a really good RDA in my opinion. Most of these where in the $20 to $30 range with the exception of the TOBH with the 3 caps which was $45 and worth it as it is really good one.

Where in the world did you get an igo-m for $25 I only see them for like 45-50

 

[joecil]

Where in the world did you get an igo-m for $25 I only see them for like 45-50

phoenix2402 on ebay and was $20.99 with free shipping and came from China. Here is the place I bought it from and if it is a clone then the box and numbers are also since it checked as real. iGo M Style Rebuildable Dripping Atomizer RDA Vape Atomizer 510 Stainless Steel | eBay

I might add this is if not the best close to best taste, vapor producer I have and that is saying something. I also might add it is very easy to build due to the large holes with dual hole positive block.

 

[gpjoe]

I'll chime in, if only to agree: For the money spent, you can't beat an Igo atomizer.

 

[Herfalerf]

Yes igo it good for the money and totally guilt free.

 

[bsoplinger]

FastTech offers Igo-M clones for $12, stainless, black or gold. Gotta luv those huge airholes!

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[classwife]

Moved to Rebuildable Atomizer Systems from APV Discussion

 

[Btsmokincat]

I like the Igo's and you won't go wrong with one but as another option....

I have a Smoktech Caterpillar Dual RDA with 10 (yes ten!) adjustable airflow holes, five on each side. I like the quality and it works really well plus it's not a clone...

Here it is on a GP Paps clone with an Aerotank driptip...


$12.50 at madvapes.com! http://www.madvapes.com/caterpillar-rda.html

 

[omnipixel]

First - 101 is reputable and takes care of legitimate customer complaints

Second - you need to learn - Tight is Tight - To tight is Broken

You only need to Capture the coil leads, not crush them.

I understand how tight but dude, the screws they sent me - BOTH sets just slide right in and I can pull it out with my thumb, dont even have to screw it in.