Need To Place An Order TODAY-- Backup Broke ADVICE??

Status
Not open for further replies.

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA
I know Mt. Baker has both the 510 to 808 and eGo to 808 adapters. They were in stock last I looked. If you are still looking for "other" too they have a good selection of tanks and other basic stuff. Worth looking as their shipping is low - $4.00 I think - and they are wicked fast at getting orders out the door. I usually get my ground shipping stuff in three days.

Hit the coupons tab too at the top of the ECF page. They have a 10% off code.

Oh - shout out from Mission Hill! :headbang:
 

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
71
Williamsport Md
I went Mech mods. Most with a cheap Kick for regulation.
My APV are more of the second string players that do get in the game.
Plain old EGO style batteries are my backup for my backups.

Funny thing is, I never saw the real need for VV Ego type Batteries. They cost almost as much as a cheaper APV are sealed and therefor Disposable ans for the most part they do not regulate nearly as well as the battery drains.
Simpler to mate a proper ohm coil to the fixed Battery at 1/2 to 1/3rd the price and invest in something Nicer for serious vaping enjoyment.
 

MonicaRae

Super Member
ECF Veteran
I know Mt. Baker has both the 510 to 808 and eGo to 808 adapters. They were in stock last I looked. If you are still looking for "other" too they have a good selection of tanks and other basic stuff. Worth looking as their shipping is low - $4.00 I think - and they are wicked fast at getting orders out the door. I usually get my ground shipping stuff in three days.

Hit the coupons tab too at the top of the ECF page. They have a 10% off code.

Oh - shout out from Mission Hill! :headbang:

Yeah I was looking at them...been tempted to try their juice too. Funny my stupid spinner was dead as a doornail yesterday and suprise today its working...stupid thing. Oh well I ordered the MVP can't go back now (not that upset ;)) but I could've just spent the money the "other" stuff/thing?

Oh and I greet you back down here from the Southcoast!!

Everyone's mech crazy I guess I'm just not ready (sigh...) I vape to not smoke and yes I like getting new "toys" but to me it's just a little too much. Someday I'll probably change my tune. As it is RBA's are piquing my interest I just haven't pulled the trigger quite yet...not sure if I'd be any good at building a coil. I'm not very handy.
 

TheJakeBailey

Ultra Member
ECF Veteran
Verified Member
Sep 15, 2013
1,275
2,596
Austin,TX, USA
I really think that you can't go wrong with the MVP. It's simple to use, sturdy, huge battery. I have two that are my at work all day, go to devices. You asked about Carto tanks a few posts back, and I also REALLY love them! :) If you get one, I highly recommend Ibtanked! Great people, great product, and you can customize them however you like. And finally, Mt Baker. Lets just say I "frequent" Mt baker. lol Excellent customer service,hard to beat prices, fast shipping, and I've been really happy with the flavors. They are a big vendor, so if you look at the reviews for different liquids, there are usually lots of comments that may give you a better idea if you will like it before you order it. Enjoy the new MVP!
 

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA
Yeah I was looking at them...been tempted to try their juice too. Funny my stupid spinner was dead as a doornail yesterday and suprise today its working...stupid thing. Oh well I ordered the MVP can't go back now (not that upset ;)) but I could've just spent the money the "other" stuff/thing?

Umm... didja "accidentally" turn it back on? :oops: (It's been known to happen 'round these parts before.)

If you decide to order from Mt. Baker check the "free juice" link on the bottom of the main page 'cause if you order any liquids or not, unless you are spending an insane low amount there you WILL be trying it. lol I think the $$$ cutoff is only spending $15.00 to get a free sample with your order. They say it will be a fixed PG/VG ratio for the freebies, but if you can't do PG - like me - if you put a note in the comments box at checkout you can request your freebie as high VG - and you will get it. James and his crew is really good peeps to deal with.
 
Last edited:

MonicaRae

Super Member
ECF Veteran
Umm... didja "accidentally" turn it back on? :oops: (It's been known to happen 'round these parts before.)

If you decide to order from Mt. Baker check the "free juice" link on the bottom of the main page 'cause if you order any liquids or not, unless you are spending an insane low amount there you WILL be trying it. lol I think the $$$ cutoff is only spending $15.00 to get a free sample with your order. They say it will be a fixed PG/VG ratio for the freebies, but if you can't do PG - like me - if you put a note in the comments box at checkout you can request your freebie as high VG - and you will get it. James and his crew is really good peeps to deal with.

LOL>> No BELIEVE me I clicked that button like a mad women! It was dead dead dead.. and I thought the battery was just dead so I went to charge it and the charger was working (green light on it was on) but when I screwed the thing in the light on the charger just wouldn't change to red. IDK what was going on. Then yesterday morning I decided to try and charge it again and all of a sudden the charger started charging the darn thing!

Whatever...biggest reason I'm happy about it is because I have an Aspire Igo and it only fits on the Volt Spinner. It screws on to my itaste but just doesn't make a connection. I'm not sure if I buy the 510 heads it'll fit on the body or not...I'm gonna have to ask Drew from Nhaler - I'm not sure if all the bodies are the same or not. I first bought the Ego style and for some reason it was way too big and of course at that time I didn't have my itaste.

I want to buy something else I can use on my itaste and MVP all I have are 5 iclear 16's and then 1 iclear 16b is coming with the MVP. I kind of want to get an RBA but I've never built a coil before and don't know if I wanna go down that path... or I'm thinking that 5 pack of the new Fluxomizers from madvapes. I hate to go buy just 1 mini protank u know?

I'm rambling now...................
 

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA
Couple possibilities: you are a dirty, overzealous screwer. I better explain that quick! lol

These liquids oddly enough are non conductive. Liquid on the battery or charger connector can cause a less than ideal vaping experience and/or problems with charging. Keep your contacts on both the battery and the charger clean - it makes a difference. Just about any device will leak a small amount of liquid onto the battery connector - that's pretty much normal. But a leaking all over the place mess? That's a whole different issue.

Thingys should never be screwed onto your battery more than finger tight. If you can't unscrew your device from your battery in a one handed operation it's on too tight. If you do that one too many times you risk pushing the center pin on the battery or a charger down too far and you start having problems with devices making contact. When that happens it's just in our nature or something to screw it on even harder - only making the problem worse. I don't know why, but some folks approach this stuff putting things together so tightly they almost have to resort to vise grips to get a device off a battery. Occasionally they actually do. Wrong approach here.

If you got a green LED on the charger and the battery LED didn't give it's usual series of blinks (Joyetech Ego's blink when connected to the charger to indicate a connection is established, can't recall what a Spinner does.) then that time it wasn't making contact for either of the above reasons.

If you think you are guilty of overzealous screwing there are ways to pull the center post of the battery up, just a tiny bit, to get it making proper contact again.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread