Ok ok u all have told me to rebuild my protank heads. I've watched every YouTube video I could find and I think I can do it. But im not sure I want 100' of wire and wick till I know if im able to do this anyplaces to get a few feet? Do they sell it at home depot lol? And the meter reader thing no idea where to get that either. Please help
- Status
most of the better online venders have rba/DIY sections and sell wick and wire in small 3 to 5 feet sections for a buck or 2.
a cheap multi meter can be had at harbor freight, home depot or radio shack for cheap.
the cheap ones are a little less accurate and some quick math is involved (touch the leads, write down the number, test the new head. subtract number from reading = resistance)
but spend some time in the rba forums and pick up info about resistance and wire gauge etc.
a cheap multi meter can be had at harbor freight, home depot or radio shack for cheap.
the cheap ones are a little less accurate and some quick math is involved (touch the leads, write down the number, test the new head. subtract number from reading = resistance)
but spend some time in the rba forums and pick up info about resistance and wire gauge etc.
Okie Vapers
Maybe check in here and see about a local meet for a tutorial?
Might have some wire and wick to try your hand at.
Maybe check in here and see about a local meet for a tutorial?
Might have some wire and wick to try your hand at.
Check out RTD Vapor AW Batteries. They have everything you need including the multi-meter and they take Paypal (if I'm interpreting your second post correctly). Prices are middle of the road...not too high but not ultra cheap.
Go to ebay. Search kanthal a1 32 gauge (or whatever width). Then search silica wick. 3 ft, 10 ft, whatever amount.
Kidney Puncher has ecowool which is better than silica IMO. You can get it in 2' lengths and various ml. The 1ml, 1.5ml or 2ml should work in the protank. It's a bit pricey but it lasts longer than silica.
- Status
Similar threads
- Locked
