Needing a bit of help understanding something

[EthanThorn]

So i have a kanger T3'D with a 1.8 coil in but my istick tc40 reads it at 3.50ohm that is when it reads the it all i know that is for a duel coil to hit 1.8 ohm the coils should be right about 3.6ohm the thing i am wondering about is what wattage should i run it at without burning out the coil none of the power charts say anything about duel coil set ups.

 

[Katmar]

Bump for answer...good luck...

 

[David Wolf]

So i have a kanger T3'D with a 1.8 coil in but my istick tc40 reads it at 3.50ohm that is when it reads the it all i know that is for a duel coil to hit 1.8 ohm the coils should be right about 3.6ohm the thing i am wondering about is what wattage should i run it at without burning out the coil none of the power charts say anything about duel coil set ups.

If it reads 3.5 ohms on your Istick it means one of the two coils isn't making a connection, bad coil. Two 3.6 ohm coils in parallel should give you a reading of 1.8 ohms on your Istick plus or minus .1 or .2 ohms. I doubt it will vape well especially if the other coil burned out while vaping but you could try.

 

[EthanThorn]

It reads the coil sometimes not all the time I'll try replacing the coil when I can afford it see if that works but when it does read the tank it vapes around 13 watts


Sent from my iPhone using Tapatalk

 

[Robert Cromwell]

David M has it correct. One coil is open.