Nemsis Mod Issue, Any help appreciated!

[Atrain009]

Hey guys,

So I've had my nemesis clone for a while, but yesterday the rubber ring that holds the adjustable pin on the top cap became loose and fell out somehow. Now everytime I take the battery out, the rubber ring (with the screw still in it) falls out. How was the ring staying connected to the top cap in the first place?

Also, I can't put my mod down upright anymore without it firing. I'm thinking this has to do with the loose pin.

Thanks!

 

[crxess]

Hey guys,

So I've had my nemesis clone for a while, but yesterday the rubber ring that holds the adjustable pin on the top cap became loose and fell out somehow. Now everytime I take the battery out, the rubber ring (with the screw still in it) falls out. How was the ring staying connected to the top cap in the first place?

Also, I can't put my mod down upright anymore without it firing. I'm thinking this has to do with the loose pin.

Thanks!

Nope, you have over heated the mod - excessively from the sound of it.
The Delrin piece presses in place
The magnets have lost some of their repelling strength.

You will find all your replacement needs 1/2 way down the page:
SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.

Keep everything Clean and Tight and watch the Heat.

 

[Atrain009]

Nope, you have over heated the Mod - excessively from the sound of it.
The Delrin piece presses in place
The magnets have lost some of their repelling strength.

You will find all your replacement needs 1/2 way down the page:
SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.

Keep everything Clean and Tight and watch the Heat.

Thanks for the info crxess!

So I found the Nemesis Top Cap Delrin Insulators, but I'm confused as to which magnet to buy?

 

[gpjoe]

Thanks for the info crxess!

So I found the Nemesis Top Cap Delrin Insulators, but I'm confused as to which magnet to buy?

The one that says "Nemesis Magnet Upgrade" for $7.99. The only other option would be the "Nemesis Contact Upgrade" or the "Nemesis Ultimate Upgrade" - neither of which will work with the current Hcigar clone without further modification.

 

[kickflipsnnollies]

Fasttech has the same magnets for way cheaper if you have time to wait. Or you can get any 13mm OD x 9mm ID x 1mm thick neodymium magnets. I would try to find some at 2mm thick though. Those 1mm ones are pretty fragile.