NEW! - 18500 VV & VW Premium Mods from PacificEcig.com!!
- Thread starter Aqua Lady
- Start date
- th_trl_thread_readers 0
- Status
Hope to post photos from the designer of the interior tonight.
The door on the prototype is the usual slide-type door. But, he's experimenting with a new system for the door and we'll know in the next week if that will be what we roll out with. Pretty cool so stay posted!
The door on the prototype is the usual slide-type door. But, he's experimenting with a new system for the door and we'll know in the next week if that will be what we roll out with. Pretty cool so stay posted!
Hi Aqua Lady,
The fact you're building Kick compatibility into your premium mods from the get-go is a real bonus especially as they're wood. I've seen a few other wood makers toying with the idea but nothing really concrete. I think you'll have a lot of interest in these when they're released.
Before i get too excited though. Will you ship internationally?
The fact you're building Kick compatibility into your premium mods from the get-go is a real bonus especially as they're wood. I've seen a few other wood makers toying with the idea but nothing really concrete. I think you'll have a lot of interest in these when they're released.
Before i get too excited though. Will you ship internationally?
Last edited:
Pharein
If they can't ship it, I'll order two and we can figure a way to get it down there.
If they can't ship it, I'll order two and we can figure a way to get it down there.
Thank You, tomc! Much appreciated. I'll definitely take you up on that if that's the case.
Their site has an option for Australia in their drop-down shipping menu but no other countries apart from the US. I thought that could be a mistake.
I find this boxmod aesthetically very beautiful so as very original in the lines
.
Then, I also really like the idea of VW circuit.
One question Aqua Lady: are you also planning a bottom feeder version?
Thanks
.Then, I also really like the idea of VW circuit.
One question Aqua Lady: are you also planning a bottom feeder version?
Thanks
Hi everyone
@Pharein - yes, we will ship internationally. Sorry to confuse you with my experiment with the Australia drop down menu. It's been removed. (-:
@Katdarling, I'll have to see if USPS delivers to Venus. Thanks for your interest and signing up!
@ufo and @tomc - this particular model/prototype uses CE2's and other similar cartos, and attys like GotVape's Sapphire, so they hold juice in them. The designer is not currently planning a bottom feeder like the REO or Phidias but who knows!
Hi@jimho!
Pictures of the interior are coming. My designer is resisting, "It's a prototype and it's not perfect!" but I think I can sweet talk him into sending them on soon.
@Pharein - yes, we will ship internationally. Sorry to confuse you with my experiment with the Australia drop down menu. It's been removed. (-:
@Katdarling, I'll have to see if USPS delivers to Venus.
Thanks for your interest and signing up!@ufo and @tomc - this particular model/prototype uses CE2's and other similar cartos, and attys like GotVape's Sapphire, so they hold juice in them. The designer is not currently planning a bottom feeder like the REO or Phidias but who knows!
Hi@jimho!
Pictures of the interior are coming. My designer is resisting, "It's a prototype and it's not perfect!" but I think I can sweet talk him into sending them on soon.
Ok, here is a shot of the interior and a few others. Click to view...
#1: Interior is rough (and dirty!) as we were just making sure the form factor worked. Interior changes are planned (body will widen 1/8”, etc.).
#2: Shows push button switch blue LED on
#3: Shows opening for attys, 10.5mm This port will be lined with SS on premium models
#4: Pretty small for 18500
#1: Interior is rough (and dirty!) as we were just making sure the form factor worked. Interior changes are planned (body will widen 1/8”, etc.).
#2: Shows push button switch blue LED on
#3: Shows opening for attys, 10.5mm This port will be lined with SS on premium models
#4: Pretty small for 18500
Last edited:
Hey Aqua Lady where in Hawaii are you located, I myself live in Honolulu. Nice to see another local in here. The mods that you are working on are nice, has that local touch to the with the inlays. You going to make them out of Koa wood too? Website looks great and I will need to sign up. Talk to ya later.
Aloha Vintagecharm and Altered Image, thanks for signing up!
Vintage - we are projecting a 35-45 day roll out on these. We'll keep you updated on this thread. Oh, and Gid'day! (I used to live in Melbourne)
Altered - we're on Kauai. Howzit?!
Yes, this prototype is Koa and Monkey Pod. Koa is da kine and we'll be using exotics and other materials as well.
Vintage - we are projecting a 35-45 day roll out on these. We'll keep you updated on this thread. Oh, and Gid'day! (I used to live in Melbourne)
Altered - we're on Kauai. Howzit?!
Yes, this prototype is Koa and Monkey Pod. Koa is da kine and we'll be using exotics and other materials as well.
Last edited:
Aloha Vintagecharm and Altered Image, thanks for signing up!
Vintage - we are projecting a 35-45 day roll out on these. We'll keep you updated on this thread. Oh, and Gid'day! (I used to live in Melbourne)
Altered - we're on Kauai. Howzit?!
Nice, I have seen alot of wood mods and always wondered what a koa one would look like. Can't wait to see what the finished product will look like, doin a nice job so far.
i just signed up these look beautiful also what island are you located on i hope to be moving to maui sometime this year anyway signed up and cant wait!!!!!
- Status
Similar threads
- Locked
