NEW avs3 (UFS)
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- ufs
- Status
The AVS2/UFS system will change every thing about the way you vape, its better than dripping, its consistent vapor with out the mess.
i've often wondered how the flavor could be different in an avs but after using the ufs i know. the flavor is superior. you know when you drip and the first couple drags are great in flavor and it dies down after a few more drags??... the ufs keeps the flavor consistent. i have a bottom feeder, cartos carto style mods, avs style mods and started vaping with dripping. it's like nothing i have used before. truely an experience and a lot easier to use. no piercing no replacing carts no screwing plastic bottles injecting cartos no napkins and imo better than dripping aside from the obvious inconvenience of dripping.
in reference to flavor, it's there, i dripped exclusively until i got my ufs and the flavor is the same.
fwiw, you can actually use a debridged atty in a ufs and it works just as well, just vaped a tank of juice on a debridged atty just fine.
eta: another thing i noticed, if vaping at higher voltage like 6+ (2 x RCR132a 3.2v) it doesn't matter if you flood the heck out of the atty, in fact i prefer to flood it, the strength of the bats and heat light that atty up and make flavorful plumes of vapor. it sounds like its drowning, gurgling, and you can "feel" the resistance of the liquid globs inside the atty and tube, but it doesnt bother me, the tremendous vape is worth it.
fwiw, you can actually use a debridged atty in a ufs and it works just as well, just vaped a tank of juice on a debridged atty just fine.
eta: another thing i noticed, if vaping at higher voltage like 6+ (2 x RCR132a 3.2v) it doesn't matter if you flood the heck out of the atty, in fact i prefer to flood it, the strength of the bats and heat light that atty up and make flavorful plumes of vapor. it sounds like its drowning, gurgling, and you can "feel" the resistance of the liquid globs inside the atty and tube, but it doesnt bother me, the tremendous vape is worth it.
Last edited:
As for me I hate everbody using a UFS right now. You might ask why would a member of the family hate me.
The only reason is that someone like you and I lucky enough to get his pre order UFS and have sent by Bruce's loving staff or by the man himself and then have THE G**D DAM USPS LOOSE YOUR LONG awaited GG UFS
Thats it iam going out like David Carradine
J/K
The only reason is that someone like you and I lucky enough to get his pre order UFS and have sent by Bruce's loving staff or by the man himself and then have THE G**D DAM USPS LOOSE YOUR LONG awaited GG UFS
Thats it iam going out like David Carradine
J/K
As for me I hate everbody using a UFS right now. You might ask why would a member of the family hate me.
The only reason is that someone like you and I lucky enough to get his pre order UFS and have sent by Bruce's loving staff or by the man himself and then have THE G**D DAM USPS LOOSE YOUR LONG awaited GG UFS
Thats it iam going out like David Carradine
You must really hate me then 'cause I got 2 of them
Hi Imeo, How are the new control rings coming along, I need another GG fix. Daz
hey, just a quick question,
so the new stock of UFS is going to appear together with the SS GGTS in the shops?
Didn't get around to getting the UFS this time around, and I understand it's all sold out, want to get the whole stainless steel package.
so the new stock of UFS is going to appear together with the SS GGTS in the shops?
Didn't get around to getting the UFS this time around, and I understand it's all sold out, want to get the whole stainless steel package.
Sorry Imeo, I will explain better. I thought there was a production problem with some of the control rings for the UFS and you were going make some more control rings and then there would be a few more UFS's available. I just wondered how this was going? When I said 'Fix' I meant fix like junky not fix like repair. All my GG's still work like new, they are immortal after all. Daz
Last edited:
Hey guys, I am running a new juice in my UFS today and I am having a hard time getting it to feed into the atomizer properly. The juice is extremely thick VG (think honey consistency). I've tried the following:
1) air control ring closed 100%, liquid control open 100%
2) tried removing the O ring in imeo's AVs V3 video 5
Anything else I can try?
I am able to get juice fed into the atty if I loosen/remove the top cap. This ends up overfeeding a bit and I get some juice in the collector tank which I can then suck into the atomizer and vape for awhile (I don't mind vaping through juice in the collector tank, works fine). I need to repeat this process once all the juice in the collector tank is vaped through and I start getting dry hits from the atty. Any recommendations aside from diluting the juice (which I've tried before and really takes away from the flavor)?
I still LOVE this UFS btw, would just love to use it with all my juices
1) air control ring closed 100%, liquid control open 100%
2) tried removing the O ring in imeo's AVs V3 video 5
Anything else I can try?
I am able to get juice fed into the atty if I loosen/remove the top cap. This ends up overfeeding a bit and I get some juice in the collector tank which I can then suck into the atomizer and vape for awhile (I don't mind vaping through juice in the collector tank, works fine). I need to repeat this process once all the juice in the collector tank is vaped through and I start getting dry hits from the atty. Any recommendations aside from diluting the juice (which I've tried before and really takes away from the flavor)?
I still LOVE this UFS btw, would just love to use it with all my juices
when i get real empty i will give a light pull through the air vent holes with my thumb over the mouthpiece, very effective in getting the last of the juice out of the tank, may try that.
OR take the mouthpiece off, close air control, open liquid and blow on top of mouthpiece metal holder, that will force the juice to the cr as well, then vape it up
strange that it is not feeding, ill find my thickest juice tonight and see if i can replicate.
OR take the mouthpiece off, close air control, open liquid and blow on top of mouthpiece metal holder, that will force the juice to the cr as well, then vape it up
strange that it is not feeding, ill find my thickest juice tonight and see if i can replicate.
Urba, I am making some UFS first and after that the steel GGTS will come
Ok Daz, no problem
take off atomizer and blow air through it to clean the liquid inside it theduddes. Also, vape with air and liquid totally open and mouthpiece screwed not hard at all. Just screw mouthpiece until it stops, no more
Ok Daz, no problem
take off atomizer and blow air through it to clean the liquid inside it theduddes. Also, vape with air and liquid totally open and mouthpiece screwed not hard at all. Just screw mouthpiece until it stops, no more
The funny thing is... I have some fairly thick VG juice which doesn't vape so well in my AVS 2 (with an 808 cartomizer and holes punched) that vapes beautifully in my UFS. I open the juice on full, prime it gently with the air control closed, and loosen the mouthpiece just a tad.
If your juice is as thick as honey, though, you're probably going to be messing with it a lot.
If your juice is as thick as honey, though, you're probably going to be messing with it a lot.
- Status
Similar threads
