NEW avs3 (UFS)

[imeothanasis]

Son, thats exactly what is happening. Can you please tell me if this happens on 6 volts or 3,7 volts? Also be sure that if CT is full you will not be able to vape nice. If you overflood the CT by mistake then it is too dificult to come back to your previous stage by simple vaping. You need to put off the liquid from the tank by blowing via the 4 holes and the liquid will come out from the mouthpiece. But if you want to avoid overflooding you have to be careful when you open the liquid control. Its like you open a fount. Dont overdoing it.

 

[sonabraham]

I only vape at 6 volts. And I intend to use standard 510 atomizers if its the last thing I do. As to the flooding, I don't seem to be able to stop it, no matter how slow I open the liquid. I'm not filling the tank all of the way. And as I said, I only open the liquid 1/8 turn at a time. try it there and then another i/8. Also notice that the control tank filled itself over night.
I do thank you for your help

 

[imeothanasis]

I have left my UFS full of liquid to rest for 4 days because I vape all day and testing my new atty. After reading your post I desided to vape UFS again. It vapes better than 4 days ago lol. Ok, I had said that better to close the liquid control if you intend to leave UFS for a long time or overnight. Hifistud mention the same even if he hadnt overflooding issues. So your problem is because some atomizers leak too much. But we have the solution to this issue too. Close the liquid control and you will be ok Son.

 

[sonabraham]

I really wish you are right. I just closed air and liquid and blew hard on mouthpiece. Actually moved enouth liquid up into main tank to allow me to vape from the control tank. But it won't last, I don't think. This is the point I was at yesterday. I may be able to vape from the CT for a couple of hours. Then I'll have to do something. Yesterday after opening liquid 1/8 turn @ a time untill the liquid was nearly open it worked great. Not sure what this all means besides closing everything off when not it use. Also should I close everything off every few hours and blow liquid out of CT or just vape out of CT again. Problem is every change seems to lead me to somewhere I don't want to be. ???????????

 

[imeothanasis]

Son, 1 min, you didnt do as I said. Ok, lets do it again. You totally close ONLY liquid and leave air totally open. Blow via 4 holes and the liquid that is inside CT will come out through mouthpiece. That way you unbloct atomizer and CT. Now you can vape normal.

You will close the liquid and the air only on pockets and overnight, thats it.

 

[Poppa D]

It sounds like the 510 is loose, or the adaptor on top isn't tight, or maybe the very top oring isn't snugging up. Something isn't right for it to be flooding so badly.

 

[sonabraham]

Please don’t take that the wrong way. I’ve blown through those holes two dozen times. So I keep experimenting on different ways. Anyway, that’s not really my problem. My problem is why does it keep getting flooded in the first place. On a real good day I can barely feed the atty. Yet, all I have to do is turn around twice and the whole thing is flooded. There has to be something I’ve totally missed.
I’m trying to vape out of the CT now. But fairly quickly I’m out of juice. I crack the liquid ring just a little and pretty soon it starts gurgling. So I close the ring. Back and forth.
I really love this device and I’m determined to make it work as it should.
Didn’t mean to make you mad. Just looking for answers.

Thanks again

 

[sonabraham]

Don’t know about the atty but I put them in fairly tight. And I don’t play with the mouth piece other than to see that its snug. I actually haven’t checked the adaptor in a while. Will be easy to check. And the o-ring I seat with the round end of a paper clip. ?????????

 

[muddstar]

Are you using the same addy? Try a new one. I had a flooding problem bout the 3rd day, changed the addy and haven't looked back.

 

[ggts2011]

Im having keeping flow of liquid going constant with out a dry spot is this normal ?
my set is
GGTS 2011
UFS with a cisco 510 lr 1.5 ohms
can any please help me out ...

 

[thedudeabides]

I had a similar issue with flooding one day, but it was my own fault. While opening and closing the juice control so many times I actually slightly unscrewed the top most section of the UFS ever so slightly from the acrylic window which totally threw off the pressure in the tank. I would recomend you make sure all of your components (especially the tank peices) are properly tightened. Opening and closing the juice control can inadvertantly unscrew one of those peices.

 

[imeothanasis]

Im having keeping flow of liquid going constant with out a dry spot is this normal ?
my set is
GGTS 2011
UFS with a cisco 510 lr 1.5 ohms
can any please help me out ...

I didnt understand your problem my friend GGTS2011. Can you please explain better? Can you vape normal or you have a problem?
Nice ecf name by the way!

 

[imeothanasis]

Son, check this video, I made it today for you, maybe it will help you

 

[ggts2011]

I didnt understand your problem my friend GGTS2011. Can you please explain better? Can you vape normal or you have a problem?
Nice ecf name by the way!

when i vape it goes for while about 3 or 4 vapes then i hit a dry spot and it stays dry until i suck on it a few time without switching it on ...

 

[imeothanasis]

So you have dry taste all the time? This taste stays with you even if you have CR and LC totally open?

 

[ggts2011]

yep goes dry then suck it and its back and so on even fully open liquid is pg

 

[namle]

I had this same problem untill today. What i found is when you keep getting the burnt taste you are cooking the liquid. what this does is it makes a real thick liquid in the atty which clogs the atty. so i took the atty out and gave it a good cleaning and blew it out with canned air reinstalled and now it works fine. I have been fighting this from about the 3rd day and thought i was doing somthing wrong so i watched all the vids again and found that i was doing it all right. So i guess this is part of the learning curve. lol Hope this helps. I have only had my ggts for a week so still learning. Really love the GG.

 

[sonabraham]

Imeo, great video. That helps a lot.
That last part of the video where you are talking about refilling, I got lost.
Would you please go over the position of the liquid control and what you do with it when refilling.
Again thank you very much

 

[imeothanasis]

refilling:

1. clean your atty by blowing air
2. close air, open liquid
3. open glass
4. put atty, tight it hard
5. close glass
6. close liquid
7. take off the mouthpiece
8. open refilling cap
9. refill
10. close refilling cap
11. put mouthpiece, screw it hard so o-ring will go in place and then unscrew the mouthpiece and screw it again but not hard, just stop when you feel the first resistance.
12. open air
13. vape
14. when you see that taste is going to change open liquid by 1/2 turn
15. continoue vape and see if you need any adjustment of liquid. Dont wait to have overflooding or burn taste first. When you see that something is starting to change make the nessesary adjustments.

 

[imeothanasis]

Of course you dont do all those things eve rytime you refill. For example you dont take off atty and blow air to clean it. I just told you to do that just to make a fresh start with UFS. If you want to refill, you start from number 6