New EGO TANK system.

[Katya]

WOOT!!! I made it all the way to the end of this thread! It's been a few days since I started, and every time I've come back to read some more there have been another few pages added - ROFL

Quick question for you all. I'm trying to return to vaping after a bit of a hiatus, and am interested in these Ego-T's. Before when I was vaping I was sticking pretty much with the Nhaler line of HV Octane liquids - has anyone tried these liquids on the Ego-T, or have any opinions on how they would work? Not sure what the PG/VG ratio is in them, but if I recall they weren't the thinnest of e-liquids.

If not, are there any other brands that y'all could point me to that would most likely work well with the Ego-T?

Welcome back!

I've tried Drew's HV liquids, which are his thickest, I think. I love Drewbacco 1 and I always thin it out a bit for my cartomizers. I either mix my D1 with thinner e-liquids (like Vapor Station's or Decadent Vapours') or I just add a couple of drops (per ml) of vodka (if you want more TH) or distilled water or plain PG, with or without nic. Works great.

I also tried Halo's menthols; Backwood Brew's Malty, Malty Toffee and Honey Flue Nut; Nhaler's Lung juices; and Ecopure. They all seem to do just fine.

Vaperite eliquids seem to be too thick for the tanks--but I'll try diluting them.

 

[Frick]

Vaperite eliquids seem to be too thick for the tanks--but I'll try diluting them.

I saw you mention this before. Are you using the pure VG liquid from Vaperite, or his 50/50?


Is there any other news on v.2 attys? I'm thinking if they made an improvement (especially after all the issues I'm reading about) I might just wait until v.2 attys are in stock.

 

[Mooler]

You've come a long way baby.

This is it.

 

[Katya]

I saw you mention this before. Are you using the pure VG liquid from Vaperite, or his 50/50?


Is there any other news on v.2 attys? I'm thinking if they made an improvement (especially after all the issues I'm reading about) I might just wait until v.2 attys are in stock.

Sorry, I have both. The 50/50 are OK, the 100% VG are too thick. But then they are too thick for regualar cartos as well, in my experience. I always thin out Nhaler's and Vaperite's e-liquids. It's funny, I got some samples recently of Good Prophets' 100% VG juices and they are thinner than my 80/20 blends. It's more about viscosity of the juice than the VG/PG ratio per se, really. And the presence of particulate like artificial colorings, sweeteners, oils etc. The cleaner the juice, the better. But that's also true for cartos and standard atties.

 

[Frick]

Thanks. I just ordered a bunch of his 50/50 (basically for the TH; I don't do good with straight VG juices), but haven't received it yet.

I'm glad so many people are willing to be the "early adopters" of this system, so that the rest of us can read about your experiences. I think had this been available three weeks ago (when I first started vaping), I would have ordered this instead of a standard eGo. At least my batteries will be compatible.

 

[ournature]

In regard of my previous statement about the atomizer spike (needle) beeing taperd on the updated atty version...

well, i should say i might be wrong
I mean, today i looked at it carefully and realized that v2 spike is just wider (both top and bottom) than v1 spike.
In fact when i placed one of my old tanks (previously pierced by a v1 atty) into the v2 atty i got some resistance and it was pretty hard to push down as the tank hole was narrower than the spike.

Beeing the spike wider i might have been fooled by an 'eye perspective error' that led me to perceive the spike as tapered.

So... spike in v2 atties is wider than v1 for sure but it might not be tapered as i previously stated.

In any case the updated version looks to wick better than the original one.
Beeing the slow wicking the main issue encountered on the original project (while flooding was reported just in rare circumstances) , i think the designer opted for a slightly wider 'needle'.
I was told the tank/cartridge has been updated too but i haven't got them yet.

 

[bmanchee]

Welcome back!

I've tried Drew's HV liquids, which are his thickest, I think. I love Drewbacco 1 and I always thin it out a bit for my cartomizers. I either mix my D1 with thinner e-liquids (like Vapor Station's or Decadent Vapours') or I just add a couple of drops (per ml) of vodka (if you want more TH) or distilled water or plain PG, with or without nic. Works great.

I also tried Halo's menthols; Backwood Brew's Malty, Malty Toffee and Honey Flue Nut; Nhaler's Lung juices; and Ecopure. They all seem to do just fine.

Vaperite eliquids seem to be too thick for the tanks--but I'll try diluting them.

Hey Katya - Thanks for the warm welcome and for the ejuice suggestions. I ended up pulling the trigger on the Ego-T kit from Cignot last night, and while I was at it I ordered a couple of bottles from BWB - I saw their web site said all of their juices are 70/30 so I figured they would be safe, and I've seen tons of positive reviews about them on ECF. I'll let you know how it works out.

 

[arjay55]

In regard of my previous statement about the atomizer spike (needle) beeing taperd on the updated atty version...

well, i should say i might be wrong
I mean, today i looked at it carefully and realized that v2 spike is just wider (both top and bottom) than v1 spike.
In fact when i placed one of my old tanks (previously pierced by a v1 atty) into the v2 atty i got some resistance and it was pretty hard to push down as the tank hole was narrower than the spike.

Beeing the spike wider i might have been fooled by an 'eye perspective error' that led me to perceive the spike as tapered.

So... spike in v2 atties is wider than v1 for sure but it might not be tapered as i previously stated.

In any case the updated version looks to wick better than the original one.
Beeing the slow wicking the main issue encountered on the original project (while flooding was reported just in rare circumstances) , i think the designer opted for a slightly wider 'needle'.
I was told the tank/cartridge has been updated too but i haven't got them yet.

The "V1" atties you have - are they the ones from the very first shipment. I know you got them real early and I was wondering if the "V2" might be the actual ones everyone overseas has been getting, not counting 'TW' who had their order in early as well.

If that is the case it could account for some of the leaking problems if you have 2 atties - one wide spike, one narrower spike. If you put a tank on the narrow spike that has been originally pierced by the wider spike then it stands to reason it would leak. Of course this is all conjecture, but one possible cause I would think. It could also affect the draw and vapour production/dry taste that is happening.

By the way, thanks for all your input and information mate. You were largely responsible for piquing my interest in these, and finally I have some.

 

[ournature]

The "V1" atties you have - are they the ones from the very first shipment. I know you got them real early and I was wondering if the "V2" might be the actual ones everyone overseas has been getting, not counting 'TW' who had their order in early as well.

It could be.

If that is the case it could account for some of the leaking problems if you have 2 atties - one wide spike, one narrower spike. If you put a tank on the narrow spike that has been originally pierced by the wider spike then it stands to reason it would leak. Of course this is all conjecture, but one possible cause I would think. It could also affect the draw and vapour production/dry taste that is happening.

It does make sense, v1 tanks do work with v2 atties as i'm vaping with that set up right now,
but it couldn't be the same if using v1 atties with v2 tanks.
I don't have the updated tank so i can't say much more but i believe the spike would not seal with the tank as for the wider hole.

 

[cozzicon]

Yup- have to confirm a difference....

My original atties are a little dry when the tank is full... then vape better as the tank drains.

The new atties from Cignot vape nicely all the way through.

Visually- I haven't decided if there is a difference yet. Too hard to determine. But it looks like the pierce tube is slightly larger.

If I can get a decent photo I'll post a picture.

 

[MilkyG]

The air doesn't enter the cup and then go through the nickel mesh..... once it is turned into vapor it directly exits the cup and goes past the two flats on the piercing needle plate.

Usually when the draw gets "tight" it is due to clogged or semi-clogged holes in the ceramic cup...... or a problem with the plastic barrier plate that lives below the cup/mesh cylinder. That plate can become distorted by heat or partially dissolved by some solvents. "Gunking" of the mesh wrap around the cup can also "tighten" the draw to some extent.

So the purpose of the mesh, I presume, is primarily for heat dispersion? And maybe secondarily to capture condensate? I ended up doing a more lengthy IPA (100%) soak...more improvement on flavor and vapor and a "slight" improvement on draw. I have to point out that I've been using 50/50 (no wicking issues though) with some dark flavorings in some of my mixes. The flavor is still well below what I get from a CE2...although ease of fill and a lack of juice in the mouth makes this my current favorite by a slim margin. I want the best of both in one system!!! BTW...I've also noticed that volume consumption is not quite as high as when first using these, for whatever reason. Keep up the great posts!

 

[DaveP]

So, these work with the standard Ego 650mah batteries? Anyone compare the hit, vapor, and taste with the Joye Type B cylinder (Monster) atty? Up to now, the Monster atty has been the best combo of juice capacity (2.5ml), taste, and vapor (outside of LR attys) that I've found, including the CE2.

Looks like I may have to order a set of attys and tanks from Vicki.

 

[Scottbee]

So the purpose of the mesh, I presume, is primarily for heat dispersion? And maybe secondarily to capture condensate?

While the mesh does create a thermal barrier... its original purpose (910, 510, etc.) was part of the liquid delivery and atomization process. It is/was a reservoir for liquid, and when incoming air is passed through it, the air charge picks up some liquid along the way and delivers it to the coil pot. The tank attempts to use a more direct liquid delivery approach with the tube and wick.... but ultimately the outer mesh wrap still gets saturated with liquid and becomes part of the delivery system.

 

[cozzicon]

So, these work with the standard Ego 650mah batteries? Anyone compare the hit, vapor, and taste with the Joye Type B cylinder (Monster) atty? Up to now, the Monster atty has been the best combo of juice capacity (2.5ml), taste, and vapor (outside of LR attys) that I've found, including the CE2.

Looks like I may have to order a set of attys and tanks from Vicki.

The eGo Mega stuff was my preference as well Dave, I think you will be happy with these based on watching your preferences for 6 months.

Yes. Standard eGo batts work fine.

 

[Scottbee]

An interesting data point:

My original "T" (eval unit) has started to run "hot" and the vapor production is less than satisfying. I have cleaned it and have given it an alcohol soak. No real improvement.

Put it on the meter and it is now reading 1.6Ω. Bad sign.

I'll try a few more things to "bring it back".... but the fat lady may be singing on this one.

 

[cozzicon]

An interesting data point:

My original "T" (eval unit) has started to run "hot" and the vapor production is less than satisfying. I have cleaned it and have given it an alcohol soak. No real improvement.

Put it on the meter and it is now reading 1.6Ω. Bad sign.

I'll try a few more things to "bring it back".... but the fat lady may be singing on this one.

How old is that atty? And can I assume it's version 1?

Just collecting some data for myself

 

[Scottbee]

I received this atty on December the 29th.

With the exception of the depth of the air slots (and external printing) I don't see any obvious differences between it and the recent units that I have received from Cignot.

 

[Lola69]

I'm hoping someone can help me out here. I just received my eGo tank atomizers and carts, am using TV liquid and while I got a few great hits off it, it is now tasting like a burnt atty (can't taste the juice and it's just like when I drip and don't have anymore juice). Am I doing something wrong or is this normal? I tried holding my ego in several angles (looking like a complete idiot at work too) but nothing is helping. The cartridge is full btw. Hmmmmmmm......anyone? tips? tricks?

 

[Scottbee]

I'm hoping someone can help me out here. I just received my eGo tank atomizers and carts, am using TV liquid and while I got a few great hits off it, it is now tasting like a burnt atty (can't taste the juice and it's just like when I drip and don't have anymore juice). Am I doing something wrong or is this normal? I tried holding my ego in several angles (looking like a complete idiot at work too) but nothing is helping. The cartridge is full btw. Hmmmmmmm......anyone? tips? tricks?

Is the tank "fully seated" on the atty body... ensuring that the piercing needle has poked through the hole in the tank?

Are you using a "thick" and viscous liquid?

 

[Lola69]

Yes. The tank is fully on (I kinda felt the pop when it pierced). I am using TV German Chocolate cake (dark, thick, viscous) and while a few hits were an absolute dream (never tasted TV this way and I've been vaping this flavour on a 306....way better with the T).