New Genesis type atomizer by DID!

[Spanked]

Anyone know where to get 32g or 30g wire? eBay has dried up lately.

Wire and Wick

 

[elfstone]

Most mesh out there is 304 SS, which is food safe and lead free. It's used for food related filtration so, there. I have no idea where "someone" gets 316 SS, which is supposedly superior, certainly more expensive, but both of them are just as safe.

 

[Horseman9]

Most mesh out there is 304 SS, which is food safe and lead free. It's used for food related filtration so, there. I have no idea where "someone" gets 316 SS, which is supposedly superior, certainly more expensive, but both of them are just as safe.

McMaster-Carr has both types. looks like the 316 is cheaper for some mesh, more expensive for others.

 

[Horseman9]

McMaster-Carr

 

[ChuckBell]

nichrome 32 gauge wire Nichrome Wire

mesh The Mesh Company (Warrington) Ltd #400 Super Fine Filtration Mesh - 25 Micron

 

[mwa102464]

There is 2 different 316's though, one is a 316 and the other is a 316L, 316 has .08 Max carbon content while 316L has a .03 Max carbon content. 316L has enhanced resistance to corrosion also.

If we could get a Titanium mesh, along with a Titanium wire this just might be purely awesome. They are now making a Titanium wire which there going to start using in Atty's and Carto's this could be very good, Tungsten wire is also very good and will work better then the current wire were all using.

 

[grabeard]

I saw the Titanium wire being made in China, any from US?

There is 2 different 316's though, one is a 316 and the other is a 316L, 316 has .08 Max carbon content while 316L has a .03 Max carbon content. 316L has enhanced resistance to corrosion also.

If we could get a Titanium mesh, along with a Titanium wire this just might be purely awesome. They are now making a Titanium wire which there going to start using in Atty's and Carto's this could be very good, Tungsten wire is also very good and will work better then the current wire were all using.

 

[mwa102464]

@ grabeard,

I haven't searched for it yet, I'm sure its available ordering it from China, maybe Kanthal.com might be making it not sure, but they only sell big amounts and wholesale, I got a 5lb roll of wire from them and it was $250 and that was the least they would sell, I do have an account there so I'll check. They are the leader in making wire or one of them for sure. I'm going to look into it this week and see what I can find, if I do find it I will post it for sure.

I would also like to find a mall coupling nut that I could screw onto the Bras center poll with a screw on the top to secure the top wire, one of these = http://www.fastenermart.com/html/NT115-1102.html

 

[Zurd]

nichrome 32 gauge wire Nichrome Wire

Is nichrome wire and khantal wire the same thing? If not, what is the difference ?

 

[mwa102464]

Is nichrome wire and khantal wire the same thing? If not, what is the difference ?

NO, Different, material make up is the difference, you can go to Kanthal dot com to read the specs on each .

 

[braveheart]

NO, Different, material make up is the difference, you can go to Kanthal dot com to read the specs on each .

What about flavor and vapor production, which one of those wires is better?

 

[fskdc]

I never noticed before you mentioned it but I tend to push out through the air hole until I see a nice thick vapor then I start to inhale and always get great hits. Definitely worth pointing out because it does improve the experience of a genesis.

Wanted to leave this tip for everyone that is new to Genesis types. Hope it helps. Cant figure out how to embed video on this site. Tried all options YT gives for the codes.

How To Vape A Genesis Atomizer For Newbies - YouTube

 

[Cloud Wizard]

Titanium sounds promising, but I thought Tungsten had oxidation issues outside a vaccum (hence the removal of oxygen in incandescent lightbulbs)

 

[Scottinboca]

I'm doing the happy dance!!! I just ordered my second DID.

 

[Cloud Wizard]

I'm doing the happy dance!!! I just ordered my second DID.

Yeah! I'm "happy dancing" for you too. Although it may actually be the beers
Congrats!

 

[Cloud Wizard]

Hey, felt like wrapping a new coil and decided to go with 34A-1 this time. Wrapped a 3/4 that's pulling 3.1ohm that is killer. Not sure what other folks have found with battery life, but my Provari has been going through batts much quicker at lower ohms. I almost always vape 3.0ohm@5.2v for 9.0watts and this is really a nice setup for me.

 

[Darryll]

I too am using a 3/4 wrap of 34g and aim for the 3Ω range hovering around 8 to 9 watts.
On average I've noticed that with a ~2Ω coil I'm good for at least three full 18350's a day. At ~3Ω I get about an hour or less in the morning from my 3rd 18350 from the day before.

 

[dspin]

270 Mesh looks to be the way to go if your a VG juice user or high VG Juice user, maybe even lower then 270 could be even better . For better wicking, less holes per square inch seems to be working better then more holes per square inch like the 325-400 has.

I use all VG or 70% VG and 400 mesh - I have no wicking issues and flavor is best IMO with that. I don't care for 325 - flavor loss, but more TH. I can't imagine 270 mesh. That would ruin my juice.

 

[Cyrus Vap]

I use all VG or 70% VG and 400 mesh - I have no wicking issues and flavor is best IMO with that. I don't care for 325 - flavor loss, but more TH. I can't imagine 270 mesh. That would ruin my juice.

dspin how hot do you run your juice? and do you tend to vape at a higher angle (3-4 o'clock) ?

can't wait to get my DID, Jim where are you...

 

[Cloud Wizard]

For those tracking orders: #997 (regular shipping)
03/07/2012 Order Complete (e-vape)
09/07/2012 Order Processing (e-vape)
10/07/2012 Order Shipped (e-vape)
12/07/2012 Processed Through Sort Facility (Athens)
13/07/2012 Processed Through Sort Facility (NY)

Now the dreaded USPS waiting game...