New Genesis type atomizer by DID!

Status
Not open for further replies.

MiriamWTH

Moved On
ECF Veteran
Verified Member
Aug 9, 2011
778
2,889
55
Tilburg (Netherlands)
I can not explain you my feelings with this success those 6 last mounth !!!
Thank you all for this and I promise you the best vaper transformer collection to be soon in your hands!
Last week we had many strikes so the pyrex tanks were stuck for some days and I hope for this week to get them!
and for the same reason I do not have the SSL security certificate in my website and I hope this to be done until end of mounth!
Thank you again!

Do not forget to register to news letters so you can have from now and on until Christmas Promo Codes with discounts


Jim I can honestly say that I feel honored to have been on this journey with you from quite early on, seeing you grow, seeing you be the first to offer a no-nonsense option to just order it from a website, seeing your product catalog grow from just the DID (and the needle bottle LOL) to the first talk about the short DID and then the excitement about the Mini and the Gemini, including the honor you gave back to the forum by using the name that was suggested in this forum for the Gemini. Taking suggestions from the forum and translating them to new items that you then also offered on your website (Kir Fanis tank) to now also making battery mods!
I feel through this forum that we have grown with you and you also make me feel that this journey has only just begun and that we are in for quite a ride that will last a long time!

In short;

Jim I take my Hat off for you!


edit to add: Jim one of the reasons for your success besides quality and availability is your customer service that is next to none!
 

Devonmoonshire

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2011
6,750
7,969
San Diego, CA
I may not have been on the Journey since the beginning, but I have definitely been lurking in the shadows watching the voyage like an Albatross on the Main Mast. It has been indeed a wonderful experience watching these devices mature and grow into the collection you have to offer today. As painful as the process of designing and perfecting can be it is a necessary thing to get to the point which you are at now.

Sincerely;
Nate aka Darth Vapor
 

Devonmoonshire

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2011
6,750
7,969
San Diego, CA
oh
question to mechanical Battery holder users
Which is the service and how often needs to be done?

With my Mechanical mods I do not clean them as often as I probably should, but after seeing DSPIN's post I will probably be cleaning them much more often :D

Sincerely;
Nate aka Darth Vapor
 

Tonytiger1

Ultra Member
ECF Veteran
Jan 22, 2012
1,279
4,026
Houston
It's amazing what happens when you listen to your customers. ,

Many talk it Jim walks it.

Old saying. People vote with their feet.
Current times people vote with their money.

I'm not a big spender but Jim's getting my ecig budget. And my moms too. :).

Jim ss tips should be standard. I hate seeing the black plastic ones on them. I think that's why my did broke it within a week. I know it keeps the cost down.


Tony
 
Last edited:

Cloud Wizard

Ultra Member
ECF Veteran
Verified Member
Feb 24, 2012
2,315
5,684
Somewhere in PA on my Ultra Limited
LOL!!! It is a rare occasion for me to take my hat off so enjoy it while it lasts! :p

As the infamous Joe Cocker taught us, "You can leave your hat on..."

Unlike "D", I'm a lazy vaper and only clean stuff when it fails. Of course that leads to strings of explicatives (naughty curse words...).
 

Tonytiger1

Ultra Member
ECF Veteran
Jan 22, 2012
1,279
4,026
Houston
As the infamous Joe Cocker taught us, "You can leave your hat on..."

Unlike "D", I'm a lazy vaper and only clean stuff when it fails. Of course that leads to strings of explicatives (naughty curse words...).

Clean. Hahaha. Its like my motorcycle. I run so much juice through it. The tank needs no cleaning. Let it sit gunks up. Who lets their did sit. I just have one.
My wife says. Must we always have a threesome. :). I say yes.


Tony
 

Cloud Wizard

Ultra Member
ECF Veteran
Verified Member
Feb 24, 2012
2,315
5,684
Somewhere in PA on my Ultra Limited
Clean. Hahaha. Its like my motorcycle. I run so much juice through it. The tank needs no cleaning. Let it sit gunks up. Who lets their did sit. I just have one.
My wife says. Must we always have a threesome. :). I say yes.
Tony

LOL, I let a lot of stuff go but my bike is always spotless :) Sounds like you ride more than me (I only do ~10kmi/yr). If I ever end up in the Houston area I'm looking you up, sounds like you're having way too much fun down there....
 

Tonytiger1

Ultra Member
ECF Veteran
Jan 22, 2012
1,279
4,026
Houston

Devonmoonshire

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2011
6,750
7,969
San Diego, CA
As the infamous Joe Cocker taught us, "You can leave your hat on..."

Unlike "D", I'm a lazy vaper and only clean stuff when it fails. Of course that leads to strings of explicatives (naughty curse words...).

Amen to that, I think I have even come up with some new ummmm Colorful Adjectives so to speak LOL

Nate aka Darth Vapor
 

EagleHawk

Senior Member
ECF Veteran
Verified Member
Dec 17, 2009
268
120
Huntington Beach,CA
Stoked! Finally got a 4/5 wrap of 30g kanthal to go smoothly! I like using this wire due to it's toughness, but it sure can be harder to work with some times. For now though, vaping bliss. I tried to take a pic, but I don';t have anything with a good lens.

20121117_213142.jpg

Thank you Jim for the Rockin Did!:headbang:
 

studiovap

Unresolved Status
ECF Veteran
Aug 12, 2012
752
1,829
Queensland Australia
I have moved down to 30g Kanthal on my latest setup on DID No.2 of 3, my last setup was:
0.6 Ohm
#500 wick 37 x 105mm.
Solidish wick rolled to 3.3-3.4mm
2/3 wraps 28awg Kanthal, 34mm length of wire,2mm pitch of coil,
0.6 Ohms

This one is # 500 wick 37 x 65mm.
Solidish wick rolled to 2.5-2.6mm
2/3 wraps 30awg Kanthal, less wire ?, 1.2mm pitch of coil
0.9 Ohms

8195770188_1f9d6b253a_c.jpg


Seems to give the same flavor vapor and with lower Ohms my batteries are lasting longer, as you can see I have concentrated the coils lower down the wick and closer together, and as a result the airhole hits the action a lot more than a more spaced out coil. The hit is even more instant than the 28g 0.6 Ohm coil, havnt had any shorts or dry hits yet, and I do vape a fair bit LOL.
 

studiovap

Unresolved Status
ECF Veteran
Aug 12, 2012
752
1,829
Queensland Australia
I can not explain you my feelings with this success those 6 last mounth !!!
Thank you all for this and I promise you the best vaper transformer collection to be soon in your hands!
Last week we had many strikes so the pyrex tanks were stuck for some days and I hope for this week to get them!
and for the same reason I do not have the SSL security certificate in my website and I hope this to be done until end of mounth!
Thank you again!

Do not forget to register to news letters so you can have from now and on until Christmas Promo Codes with discounts


I know It's been said by many here, but being one of your customers has been and is, an absolute pleasure, your passion for vaping and your warm caring personality have been your gift to us, with your stellar products, and out of this world customers service (this includes listening intently to your customer's ideas and desires ), you deserve every bit of your success and more, I was not here right at the start, but I ran to catch up and it has been a great journey so far, with only more great miles to come.
I have already told (alright suggested LOL) my partner that she is going to help me buy the Poldiac for my Christmas present,
you make us all feel part of your team, happy contributors to your continuing success.

Your's Sincerely

Bernie

SV
 

MiriamWTH

Moved On
ECF Veteran
Verified Member
Aug 9, 2011
778
2,889
55
Tilburg (Netherlands)
Oh My Goodness!

Jim.... It is beautiful!

I already have a nic buzz from Vaping in style now!

(and a lump in my throat from emotion)

Jim, you know what I am talking about!
For the rest of you, I have to go out now (a friend gave me concert tickets to see Beth Hart in concert tonight in Paradiso A'dam) but when I come back I will post pictures!
Oh and Uma and Rick, you already know... but don't spoil the surprise now! :p

I am in 7th heaven (surrounded by huge vaping clouds!) and running off now to get a shower and run out the door!


Miriam (with the Hat!)
 

rusalka

Moved On
ECF Veteran
Jun 10, 2010
1,990
1,307
USA
oh
question to mechanical Battery holder users
Which is the service and how often needs to be done?

For mine, which is a Precise 18650, I polish my contacts and clean threads about once per week. At that time I also polish my contacts for the did.

Ironically I prefer my precise 18650 over my P+ 18650. I'm thinking about polishing the Rhodium off of the contacts.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread