I go to sleep!
Good night or what ever ....but good.
Is that the standard DID or mini on top? I am hoping the DID and POLDIAC are the same diameter
Sent from my Nexus 7 using Tapatalk 2
New Genesis type atomizer by DID!
- Thread starter Jim Damianidis
- Start date
- th_trl_thread_readers 0
- Status
Is that the standard DID or mini on top? I am hoping the DID and POLDIAC are the same diameter
Sent from my Nexus 7 using Tapatalk 2
Is that the standard DID or mini on top? I am hoping the DID and POLDIAC are the same diameter
Sent from my Nexus 7 using Tapatalk 2
Full size.
Tony
That may be a D16 (from Temon) in the picture. Standard DIDs are 20mm (D20) and the Poldiac is 22.6. Jim has talked about doing a D22 early next year (after the holiday dust settles)Is that the standard DID or mini on top? I am hoping the DID and POLDIAC are the same diameter
Sent from my Nexus 7 using Tapatalk 2
Last edited:
Right on I just measured, my DID and P+ I am so spoiled by the smooth transition
d20 = tank of velvet holding and is 20mm (realization settles in) On a side note the POLDIAC will be perfect for an ody while I wait on the D22 smoothness to be forged in the new year!
I wonders if the POLDIAC warrants a new thread? (Wanders off looking if it exists already...)
Sent from my Nexus 7 using Tapatalk 2
It's a D16. It's Jim's favorite of all his attys, and I 100% understand why! There's just something about the volume of the vapor chamber that potentiates the flow dynamics unlike anything else I've ever tried!
The other cool thing RW talked about recently is a Hy-DID base as a future accessory for Poldiac. I didn't realize the benefits till he explained them to me. Lot's of cool stuff to look forward too early next year.
Who knows,mMaybe one day we'll see something like that with a Hy-DID 22.6mm base and a D16 top. Could be called the Apollo like you suggest...
For the Apollo
Tony
Hy-did base poldiac with d16 top cap. High volume tank. Perfect vape chamber.
You can work that out right Jim.
Tony
had a look at thread (ih thing), sure glad I have Poldiac coming. Would love to see them side by side.
Last edited:
Just been looking at Poldiac pic's again and realised I can't see the vent hole, is it hidden in the slots on bottom ring?
Jim its funny that you humor us. You know we are all nuts. Well I'll speak for myself. Im nuts!
Tony
I know there are lot's collectors here. I don't consider myself as one. Personally, I'm reaching the end of my quest for new hardware. I have 4 D20s, and the necessary parts to convert them all to shorts and clear tanks both sizes. Add to that 2 mini Dids, and 4 attys from other makers. I don't know if it's a shortcoming, but I can honestly testify that unlike the others I possess, the DIDs are indeed built for life and I don't see myself purchasing anything else in a foreseeable future. Although I did purchase yesterday another 200 euro in parts only to make this collection more veratile.
All this to say, apart from being remarkable and a beautiful piece, The Poldiac was unfortunately not made to fit the D20, but a D22 (roughly.. since the Poldiac's OD is 22.6 if I understood) that has yet to be produced and that I have no need for. The Temon (battery holder) is not made to match the mini DID; I would most certainly have overlooked the millimeter gap and bought a couple if the option existed. But again it is sold with an atty I have no use for. The P+ is a perfect fit for the D20 satin... It was not in the realm of the impossible to expect a MOD that size. By the end of January, I'll have quite a few carvellas that are not a bad match either. Mini-Cubes for the mini-DIDs...
And yet, as someone that have really invested in the DID line, I can't help but feel disappointed that the marketing strategy here isn't one of "continuation".
I know very well that exposing these types of concerns in this forum is prone to fury and indignation...(a small attempt at reverse psychology
But as far as I'm concerned and given the quality of production of MMVapors, I would be a serious customer for anything that would really "finish" what has been started. Unfortunately, I just cannot really afford to be a collector and as beautiful as it may be, I wouldn't go for mod that is not specifically made for the DID. As for the Temon battery holder, I would buy it right away if it was for sale.
I only speak for myself, but I'm convinced it wouldn't be a waste of time for MMVapors to check if these 'wishes' had any market resonance...
I would hope you don't think us so intellectually challenged that a customer of this wonderful maker would risk "fury and indignation" for merely expressing an opinion on the direction of production. I personally agree that the p+ is a marvelous match up for the original DID, and in my opinion the mini-did. I use an 18350 for my mini and an 18500 for the original. I also have an original Uranus mod for when I need 18650 power. However, the Poldiac is very high on my wish list, just cause. Anyway, I think you will have a positive reaction from the community, when you elegantly express an opinion as you have done. Cheers
Sent from my cm_tenderloin using Tapatalk 2
I know there are lot's collectors here. I don't consider myself as one. Personally, I'm reaching the end of my quest for new hardware. I have 4 D20s, and the necessary parts to convert them all to shorts and clear tanks both sizes. Add to that 2 mini Dids, and 4 attys from other makers. I don't know if it's a shortcoming, but I can honestly testify that unlike the others I possess, the DIDs are indeed built for life and I don't see myself purchasing anything else in a foreseeable future. Although I did purchase yesterday another 200 euro in parts only to make this collection more veratile.
All this to say, apart from being remarkable and a beautiful piece, The Poldiac was unfortunately not made to fit the D20, but a D22 (roughly.. since the Poldiac's OD is 22.6 if I understood) that has yet to be produced and that I have no need for. The Temon (battery holder) is not made to match the mini DID; I would most certainly have overlooked the millimeter gap and bought a couple if the option existed. But again it is sold with an atty I have no use for. The P+ is a perfect fit for the D20 satin... It was not in the realm of the impossible to expect a MOD that size. By the end of January, I'll have quite a few carvellas that are not a bad match either. Mini-Cubes for the mini-DIDs...
And yet, as someone that have really invested in the DID line, I can't help but feel disappointed that the marketing strategy here isn't one of "continuation".
I know very well that exposing these types of concerns in this forum is prone to fury and indignation...(a small attempt at reverse psychology
But as far as I'm concerned and given the quality of production of MMVapors, I would be a serious customer for anything that would really "finish" what has been started. Unfortunately, I just cannot really afford to be a collector and as beautiful as it may be, I wouldn't go for mod that is not specifically made for the DID. As for the Temon battery holder, I would buy it right away if it was for sale.
I only speak for myself, but I'm convinced it wouldn't be a waste of time for MMVapors to check if these 'wishes' had any market resonance...
I just have one Did. So I would consider you a collector. Opinions are fine.
I'm not a super user like others but I give you my take on it.
In the beginning mmv just made a Did. I believe he sized it for the provari. It was a great hit and since Jim is responsive to his customers. He started offering other options as requested. We nagged him to make a battery holder. Thinking like you I believe he made the temon with matching d16. Others including myself wanted a 18650 mod. And I think that is the rub. The batteries sizes restrict the design. Just a guess but if Jim could of fit a 18650 in a 20mm of tube he would of. Maybe the hy-did option will smooth out the transition. I agree with you but IMO I understand the challenges he faces. At least I believe that that's what they are. I may be totally wrong.
What am I missing about the temon battery holder?I see it for sale.
Tony
Last edited:
- Status
Similar threads
