New Genesis type atomizer by DID!

[Jim Damianidis]

you teaser!! lol

 

[B2L]

Can you imagine a big room with all of us in it?
Oh I am dreaming!!!!!
It would be perfect!!!!

We wouldn't be able to find each other through all the clouds!

 

[2GLR]

Speaking of the Temon....

Can some of you folks that have this little guy share your thoughts about how it performs? I have an old Icon that I planned on using with my Mini but the connection on the Icon keeps getting pushed down and the hit is very weak when it does work. Does the Temon have any issues? Does the button work well? Can it stand up without falling over to easily?

Ever since I got my D20 I can't put it down. I have it set-up on my Provari so it's not very portable and people at work think I'm a crack head when they see me with this monster set-up. LOL I really need something small, rock solid and reliable for out and about and I've been pondering the Temon. What say you?

Temon performs awesome. It definitely stands up better than an icon, also hits harder as long as you have the contacts clean and adjusted correctly. I found puttting a solid 3mm wick in the hole with a 28 ga 1.3 ohm coil about perfect for the 14500 and 14650 battery. If I were to have a complaint it would be the button is too square, and rough on the palm of my hand if I use it to fire. Other than that it is perfect, and I am thinking of getting another.

 

[Brigit]

you teaser!! lol

Had a good teacher in the past months...

 

[dspin]

a big party?

Yes, a BIG Party - hehehe

 

[NatGasMan]

Dave is this a good battery to use in the Poldiac?

I bought these a while ago, but they would not work in my Provari. Been saving them just for such an occasion.

 

[Brigit]

We wouldn't be able to find each other through all the clouds!

Well, I definitely wouldn't tip anybody on the shoulder now that I have seen the possible length of the Poldiac...
If he turnes around, you risk to go knockout!

 

[dspin]

Dave is this a good battery to use in the Poldiac?

I bought these a while ago, but they would not work in my Provari. Been saving them just for such an occasion.

If thats an MNKE IMR - then yes - it is best battery - IMO of all. works awesome in Polidac. However, last yr there was a certain vendor selling fake MNKE's for 8.00 each. Hope it wasnt from him. MNKE's usually go from 11.00 to 14.00 each depending on who you get them from. Hope this helps


sorry , cant read whats on there, pic a little fuzzy and I have a 13.5 inch screen

 

[dspin]

For all of you who are interested in MNKE batts - here are the specs

FEED THOSE ATOMIZERS THE CURRENT THEY DESERVE! with this awesome battery.

Some Specs: (Un-Protected )
Flat Top Positive (please check with the manufacture of your mod to make sure this type of cell will work if you are in doubt)
Rated Capacity : 1500mah
Max (Cont ) Discharge Current 20A!!!!!
Max Rated Discharging Current 30A
Nominal Voltage 3.8v
Max Charge Voltage 4.2v + - 0.05 V

Length: 65.5 mm
OD 18.28mm






Maximum Continuous Discharging Current 20 A

Maximum pulse Discharging Current 60 A

Maximum Continuous Charging Current 6.5 A

Maximum Rated Discharging Current 30 A

Nominal Voltage 3.8 V

Maximum Charge Voltage 4.2±0.05 V

Temperature Range/Discharge -20~60degree

Temperature Range/Charge 0~45degree

Temperature Range/Storage -20~35 degre

 

[NatGasMan]

If thats an MNKE IMR - then yes - it is best battery - IMO of all. works awesome in Polidac. However, last yr there was a certain vendor selling fake MNKE's for 8.00 each. Hope it wasnt from him. MNKE's usually go from 11.00 to 14.00 each depending on who you get them from. Hope this helps


sorry , cant read whats on there, pic a little fuzzy and I have a 13.5 inch screen

Yeah sorry, the pic was a little fuzzy. Hopefully they are not fake. They have a number on them MH46698 RoHS. I paid like $12 each for them. Got 4.

 

[dspin]

You should be golden then, they hit hard Nat

 

[NatGasMan]

You should be golden then, they hit hard Nat

When I get my Poldiac, I can see being very nic sick.

 

[MiriamWTH]

Ok back in the thread and all clean and wrinkly (from the bath... from the bath!!!)

 

[Brigit]

When I get my Poldiac, I can see being very nic sick.

Some extra Methol and Eucaliptus-liquid...
Sinus-trouble solved!

 

[ujai]

For all of you who are interested in MNKE batts - here are the specs

FEED THOSE ATOMIZERS THE CURRENT THEY DESERVE! with this awesome battery.

Some Specs: (Un-Protected )
Flat Top Positive (please check with the manufacture of your mod to make sure this type of cell will work if you are in doubt)
Rated Capacity : 1500mah
Max (Cont ) Discharge Current 20A!!!!!
Max Rated Discharging Current 30A
Nominal Voltage 3.8v
Max Charge Voltage 4.2v + - 0.05 V

Length: 65.5 mm
OD 18.28mm






Maximum Continuous Discharging Current 20 A

Maximum pulse Discharging Current 60 A

Maximum Continuous Charging Current 6.5 A

Maximum Rated Discharging Current 30 A

Nominal Voltage 3.8 V

Maximum Charge Voltage 4.2±0.05 V

Temperature Range/Discharge -20~60degree

Temperature Range/Charge 0~45degree

Temperature Range/Storage -20~35 degre

Mind sharing with me the vendor who is not selling the fake ones? Planning to get this.. Thanks in advance

 

[NatGasMan]

It's here! At least in town.

Houston, TX, United States 12/27/2012 6:06 P.M. Arrival Scan

 

[Brigit]

It's here! At least in town.

Houston, TX, United States 12/27/2012 6:06 P.M. Arrival Scan

Your happiness is a joy!!!
Looking forward to the moment you actualy hold it in your hands...

 

[Kamoch]

Mind sharing with me the vendor who is not selling the fake ones? Planning to get this.. Thanks in advance

Avidvaper has these for sale:

MNKE IMR18650 3.7v Li-MN Rechargable Battery - Avid Vaper

Dspin, these batteries are 1500mAh are these legit?

 

[Tonytiger1]

It's here! At least in town.

Houston, TX, United States 12/27/2012 6:06 P.M.Arrival Scan

Ups failed to deliver today. Came after office closed. Rescheduled for tomorrow. B^#}^+%}##%%}#!


Tony

 

[Cloud Wizard]

ooooh "Koeln, Germany 12/28/2012 3:30 A.M. Departure Scan"