What time should we come over?
Well now that depends on what part of the world your in, now doesn't it?
New Genesis type atomizer by DID!
- Thread starter Jim Damianidis
- Start date
- th_trl_thread_readers 0
- Status
Well now that depends on what part of the world your in, now doesn't it?
Seems like I have fallen for that before. Yeah, come help me move and all the booze you can drink.
Well now that depends on what part of the world your in, now doesn't it?
It's always beer thirty somewhere in the world.
My wife's name is Sheri, but she's 32 years old.
..., how do you just "happen" upon a 16 bottle case? My god woman how much booze is in stock at the Miriam estate for you to just happen upon a case?
LOL I think I bought the case while it was on offer about 2 years ago, then it got lost in this chaos of a house I live in. The place is just one big mess of unpacked boxes after we moved back from Ireland to the Netherlands and on top of that my ex collects furniture, gods knows why, and the pieces of furniture just get placed anywhere and everywhere.
Currently I have rented a garage box and am slowly sorting my stuff out and moving it to that garage box, so when I finally get my own place it will be a fast move out. But this results in me finding stuff every now and then, that I forgot I had. ;-)
The funniest thing for me is that I literally found the case about 5 minutes before this post! Then sat down to check my mail and this thread!
Aren't you lucky I'm busy in the middle of the orion Nebula...
Otherwise it would be just a 7 hours drive...
Aren't you lucky I'm busy in the middle of the orion Nebula...
Otherwise it would be just a 7 hours drive...
Orion Nebula?
You are always welcome Brigit, as well as most people here!
7 hours... you must be quite a way south of Paris then!
I think secretly that she lives in the French Riviera. Doesn't want anyone to know that she lives in paradise.
When I'm ready, I'll make you a photograph and send it to you...
in 10.000 pieces
I think secretly that she lives in the French Riviera. Doesn't want anyone to know that she lives in paradise.
Paradise and the French Riviera are two complete different worlds
Couldn't live there, even if they payd me to do so...
The key is ensurung you're using high quality IMR batts with safe chemistry and a high max discharge current rating. Panasonic IMR/Hybrids=8.5A, AW IMR=10A and the MNKE IMR=30A. Most folks are fine with AW but the MNKE will handle ultra LR (less than ~1.2ohm) better)
Yes you can stack batts since the switch is mechanical there is no amp limitation. You get the various configs by adding additional tubes (e.g. I was able to stack 2x AW IMR 18490's using 18650tube+18350tube+spacers). Some will disagree with me here, but I don't see any reason to stack batts - a single 18xxx batt with LR coil will make your head spin. The reason you stack batts in the Smoktech circuited mods (Vamo, ZMax, etc) is to keep the voltage regulation more consistent (e.g. run 1.5ohm dual coil at more than ~4.5v - it's easier for them to "step-down voltage than to "step-up"). There are definitely safety considerations (must use match pairs, etc), be sure you know what you're doing before trying this.
I have both and typically use neither. A Kick is limited to 10watts (which quickly isn't enough) and the I don't see a need for the fuse with a "safe chemistry" IMR battery. I do make sure I'm swapping them out sooner on a mech mod than I would on a VV/VW mod 1) you can taste/feel the power difference as volrtage drops below ~3.7v 2) I prefer to not let my batts get down anywhere near the minimal voltage limits so always end up sticking them back on the charger ~3.6v.3) I'll probably pick up a kick at a later date, but am wondering if there is a safety fuse? device that would be a good idea. I've seen them, but know nothing. Don't want these little pipe bombs to ACTUALLY explode !
DID works amazingly with anything from 100&PG to 100%VG. IMHO #500 mesh, wick hole wide, with center channel works great with any juice.4) I intend to use every juice in the market.
There are a few good choices out there (The Pila charger Miriam mentioned is great). Here's one I recently purchased for my nephew http://www.orbtronic.com/batteries-...tellicharger-universal-battery-charger-sysmax (someone pointed oput that you can find this charger cheaper on Amazon).
Edit: Just looked at Panny IMR/Hybrid specs and they are now rated at 10A....
Last edited:
Hey Nat, are you using the protected version? I have a couple of these from Orbtronics that fit fine. I'm wondering if the protection circuit wrapper makes them too thick.
When I'm ready, I'll make you a photograph and send it to you...
in 10.000 pieces
Paradise and the French Riviera are two complete different worlds
Couldn't live there, even if they payd me to do so...
ROFL on the 10.000 pieces!!!!
And I must agree with Brigit about the French Riviera!
No, they are the unprotected version. At least I thought they were when I bought them. I didn't try and force it, but maybe they would fit. They fit in my, now my wife's, Provari just fine. I will try again maybe. Hard to take the MNKE out of the Poldiac though.
No, they are the unprotected version. At least I thought they were when I bought them. I didn't try and force it, but maybe they would fit. They fit in my, now my wife's, Provari just fine. I will try again maybe. Hard to take the MNKE out of the Poldiac though.
Gotcha, so are the the "button top" version (would still have a wrapper). I've moved towards only ordering flat tops since the only PV I have left that needs button top is my Provari (I use rare earth magnetic spacers for it).
ROFL on the 10.000 pieces!!!!
And I must agree with Brigit about the French Riviera!
I believe you all, but would love to see for myself someday. First thing after retirement (and of course once all the kids are off the payroll) I want to take sometime and do a whirlwind world tour of all the places people say are cool. That and sell everything and move to a house boat
Yes, that's right. I guess the botton top versions are bigger than the flat tops.
Got my Temon setup yesterday:
Wick: #400 mesh thin with a hole the size of a large paper clip
Coil: 4/5 wrap of 30ga @ 1.3Ω
Juice: 50/40 PG/VG
This setup is vaping pretty good. Ive run three tanks though it and Im getting good vapor. Flavor is not on point yet, I noticed that if I take the fill hole screw out flavor improves a bit but I over wick. Maybe I need a thicker wick? Anyone have thoughts on this?
I really like the look, my first polished SS PV, clean lines sleek and very pretty. I need to get a micro fiber cloth, I find I use my shirt every hour or so to remove finger prints.
The draw is much more stiff than Im used to but am getting used to it. I dont think I want to drill out the air hole. Other genesis attys that I own are ZAP, Sidewinder and iHybrid.
I find the switch very stiff and crunchy. It makes noticeable noise when I press it but I hope that will work its self out over time. I think I may cut the spring down to get a lighter throw.
Overall I really like the Temon and will get most used when I go out to dinner and parties. Glad I bought it, now I need to save up for a Poldiac.
Good work Jim
Wick: #400 mesh thin with a hole the size of a large paper clip
Coil: 4/5 wrap of 30ga @ 1.3Ω
Juice: 50/40 PG/VG
This setup is vaping pretty good. Ive run three tanks though it and Im getting good vapor. Flavor is not on point yet, I noticed that if I take the fill hole screw out flavor improves a bit but I over wick. Maybe I need a thicker wick? Anyone have thoughts on this?
I really like the look, my first polished SS PV, clean lines sleek and very pretty. I need to get a micro fiber cloth, I find I use my shirt every hour or so to remove finger prints.
The draw is much more stiff than Im used to but am getting used to it. I dont think I want to drill out the air hole. Other genesis attys that I own are ZAP, Sidewinder and iHybrid.
I find the switch very stiff and crunchy. It makes noticeable noise when I press it but I hope that will work its self out over time. I think I may cut the spring down to get a lighter throw.
Overall I really like the Temon and will get most used when I go out to dinner and parties. Glad I bought it, now I need to save up for a Poldiac.
Good work Jim
That's what I use in mine and they fit fine for me. Orbtronic - Panasonic CGR18650CH With Top Button, 2250mAh IMR High Drain 18650 Battery Cell-Made in Japan
From what I see they are rated at 10a just like the AW's. (Just saw your edit CW).
Last edited:
I love fotos
and I see more fotos here than the Foto Album! lol
PLEASE and I say again PLEASE
POLDIAC SETUPS FOTOS NEEDED TO SEE!
IN THE FOTO ALBUM
I get mails ask about the best seller!
Please all of you that have allready a POLDIAC HELP the new people to choose!!! lol
edit:
Nice signature! Pete
This is something I want to thank you about: Thank YOU for using a signature with my logo! THANK YOU!!
I am thinking of something.....
do you want me to do 2-3 bunners to use for a signature?
and I see more fotos here than the Foto Album! lol
PLEASE and I say again PLEASE
POLDIAC SETUPS FOTOS NEEDED TO SEE!
IN THE FOTO ALBUM
I get mails ask about the best seller!
Please all of you that have allready a POLDIAC HELP the new people to choose!!! lol
edit:
Nice signature! Pete
This is something I want to thank you about: Thank YOU for using a signature with my logo! THANK YOU!!
I am thinking of something.....
do you want me to do 2-3 bunners to use for a signature?
Last edited:
- Status
Similar threads
