New KangerTech SUBTANK

Jump to latest Follow Reply
Status
Not open for further replies.
Sort by date Sort by reaction score
S

shade7

Full Member
Oct 17, 2014
39
6
Chicago
Underwhelmd - Yep, just the 1 coil. Didn't see any need for dual coils on it. juice channels do look small, but so far no problems.

sos - I can see how the deck could loosen up, lot of parts screwed together there. I'll have to keep an eye open for that.
How much wattage are you using on that build? I'm at 16w right now, but haven't been chain vaping tonight.
 
M

Mrdaputer

Ultra Member
ECF Veteran
Apr 28, 2014
1,209
663
MN
shade7 said:
Couple updates now that I've had some more time with the Subtank. Not really digging the 0.5 ohm coil. Flavor is good, but runs hotter than I care for. 1.1 ohm coil around 20 - 22w seems to be the sweet spot for me.

Vaping with the RBA deck right now. 1.4 ohm coil, 12 wraps on a 1/16th drill bit. Flavor is good, but the draw is a lot more restrictive. I don't get why Kanger would make the chimney so much narrower. Rebuilding the OCC coils may be the way to go.

For anyone using the RBA deck, what kind of build are you using?
Click to expand...

After a few hours that I used it I changed the drip tip was getting too hot for me to handle. Just got a new battery so will be playing with the deck and coils when I find time. Right now I am using the .5 ohm. I think I want to be somewhere between the .5 and the 1.2 ohm. My custard taste wooooonderful :vapor:
 
dashreeve

dashreeve

Senior Member
ECF Veteran
Feb 4, 2014
145
150
Florida
underwhelmd said:
You are using just one coil on the rba deck, shade7? That's all I wanted to do as well but wasn't sure...

agreed on the .5ohm occ coil being too warm. I'm at 17 watts on the 1.2 and that's fine for me.

I was looking at the two tiny channels on the rba.... open them up somehow?
Click to expand...

I'm building single on the deck at 0.7 at 22.5 watts, not getting hot, no dry hits. I actually prefer the tighter chimney on the RBA. I was going to build some higher (1.0,1.1,1.2) so it's good to hear that it's good at those ohms as well.
 
M

Mrdaputer

Ultra Member
ECF Veteran
Apr 28, 2014
1,209
663
MN
stormjib said:
Anyone else have problems with the glass? I went to refill my tank yesterday and the glass slipped right off in my hands right after I filled the tank. 6 mls of juice hit the floor, but what bums me out more is that it still seems loose. I can fit it back on, but it's not nice and tight the way it was. Any thoughts?
Click to expand...

Mine has always fit nice and tight Have you tried a good cleaning on the whole unit?
 
dashreeve

dashreeve

Senior Member
ECF Veteran
Feb 4, 2014
145
150
Florida
stormjib said:
Anyone else have problems with the glass? I went to refill my tank yesterday and the glass slipped right off in my hands right after I filled the tank. 6 mls of juice hit the floor, but what bums me out more is that it still seems loose. I can fit it back on, but it's not nice and tight the way it was. Any thoughts?
Click to expand...

Mine seems a bit looser than when I first got it. I rest it upside down on the drip tip to fill. Clean and dry might help as well.
 
S

shade7

Full Member
Oct 17, 2014
39
6
Chicago
stormjib said:
Anyone else have problems with the glass? I went to refill my tank yesterday and the glass slipped right off in my hands right after I filled the tank. 6 mls of juice hit the floor, but what bums me out more is that it still seems loose. I can fit it back on, but it's not nice and tight the way it was. Any thoughts?
Click to expand...

Mine's still pretty tight. Maybe bad o-rings?
 
jafmf95

jafmf95

Ultra Member
ECF Veteran
Verified Member
Dec 31, 2012
1,071
5,743
Potatoland
underwhelmd said:
has anyone seen the o-rings or red gasket for the base for sale on their own yet? I'd like to have spares...
Click to expand...

The Subtank I just got came with spares. The one I bought before Christmas didn't. I haven't seen them anywhere yet. But fasttech put up a spare coil & cotton kit for the RBA base, so I'd keep an eye on them.
 
underwhelmd

underwhelmd

Super Member
ECF Veteran
Nov 22, 2014
463
6,831
Canada
Check atomizer... the old style dual coils don't work in mine. Not that it's a big deal but I was hoping to be able to use them while waiting for the real thing to get here in the mail... the reviews like pbusardo said they did work. No problem... RBA time. :laugh:

IMG_20150107_114219.jpg
 
jafmf95

jafmf95

Ultra Member
ECF Veteran
Verified Member
Dec 31, 2012
1,071
5,743
Potatoland
So there was a video posted a while ago that showed a good simple way to rebuild these. His method works just fine.

He mentioned in his video that he didn't want to remove the top - something about others breaking or bending it or something. Well, I gave it try and it twists off pretty easily. Gripped it in one pair of pliers and twisted/pulled with the other. Easy peasy:

OCC-rebuild-1.jpg

The only real reason I wanted the top off was to keep the cotton inside the head and give me room to fluff out the cotton around the openings. Mission accomplished. I suppose if you wanted to try to build a BVC head out of this, this would make it much easier to do that.

This is the original coil. It is pretty tightly packed with cotton. It is a 3.5mm coil:

OCC-rebuild-2.jpg

I was shooting for 1Ω coil, so I used 26ga Kanthal, 5/4 wrap:

OCC-rebuild-3.jpg

I used the same method as the video for securing the coil and working in the cotton, but I cut the cotton flush with the outsides and then worked it inside and fluffed it out. Worked great:

OCC-rebuild-4.jpg

Been using it most of the day. Really good so far....
 
Last edited:
Status
Not open for further replies.

Similar threads

Joseph Sanders
  • Locked
Kangertech Subtank Plus
Replies
2
Views
763
New Members: Introduce Yourself!
Joseph Sanders
Joseph Sanders
U
  • Locked
KangerTech SubTank Nickel Ni200 OCC Coils
Replies
0
Views
2K
electronic-cigz.com
Ultra
U
U
  • Locked
Step Up With KangerTech SUBTANK Plus clearomizer (Stainless Steel)!!!
Replies
0
Views
1K
electronic-cigz.com
Ultra
U
L
  • Locked
Exciting News!!! Kangertech Subtank Mini 22mm and Subtank Nano 18.5mm is about to release. Pre-Order at Whole Vape Inc. to be the first one who has it
Replies
30
Views
16K
E Cigarette Suppliers Forum
lakeygreen
L
Joshua F.
  • Locked
KangerTech Subtank Full Size. New In Sealed Box
Replies
0
Views
406
Member Classifieds and Swaps
Joshua F.
Joshua F.

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Top Bottom
Jump to latest Follow Reply
Jump to latest Follow Reply
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu