New Mechanical Mod advice

Status
Not open for further replies.

ashron64

Senior Member
ECF Veteran
Apr 27, 2014
129
20
USA
Hey all,
I currently have a nemesis clone and have been enjoying it for some time. I have been having issues with it randomly firing in my pocket, even though the locking ring is screwed all the way down to the switch. I have played with it and can't seem to totally resolve the issue, at least not for more than a few days. I've been wanting to get a new mechanical mod anyway, and this just gives me a good excuse. Anybody have a suggestion for what I can get next? I want something that won't have the firing issues, and i can't spend more than $50, so a clone is probably the only option. Thanks
 

ashron64

Senior Member
ECF Veteran
Apr 27, 2014
129
20
USA
It is. Still having the random firing. Most of the time I catch it right after I vape and i'm getting ready to stick it in my pocket. Locking ring will be all the way screwed down and i'll hear it firing. Only thing I can figure is the magnets are either dirty or worn out and aren't pushing the switch back out. I've cleaned it very well several times lately thinking it was just gunked up. Didn't seem to help.
At any rate, I'll keep working on it and possibly order new magnets....But I still want to get a new mod that won't have the same issues and use it as my all day carry.
I might be interested in a box mod as long as it's small enough to fit in my pocket and will allow me to sub-ohm. I'd be willing to spend up to $100 for that if such a thing even exists.
Any suggestions for mech or box mods that will fit my needs?
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
I have a personal pet peeve against bottom-fire buttons.

First, its an unnatural button placement. From eGo's to regulated VV/VW mods, all have a side fire button. The only reason mechanical mod manufacturers use a bottom-fire switch is because they are cheaper and easier to make. Shouldn't safety be a priority over cheap and easy?

Unless the bottom-fire button is recessed, these mods introduce an unnecessary risk whenever the mod is put down. How many owners actually lock the button each and every time the mod is set down? How many people have fallen asleep with the button unlocked and awoke when they felt the heat of an autofiring mod? Let's not forget that the mod which exploded last month at Vape Blast was a bottom-fire mod that autofired in the victim's pocket. Vape Blast had a vape blast

modexplosion.jpg

It will cost you $35 more than your $50 cap, but I recommend a Silver Bullet. A recessed side-fire button that will be more natural and much safer than a bottom-fire mod. USA made so in the rare event should it need repair, it can be shipped to the manufacturer to be fixed. A Kick sleeve is available should you wish to "Kick" the SB and continue to use the 18650 battery. The SB has been a classic for years which many vapers have in their collection.

silverveinSB.jpgSilver Bullet with AGA T2.jpg
 
Last edited:

imsoenthused

Super Member
ECF Veteran
Verified Member
May 19, 2011
782
732
43
Tulsa, OK
How much do those box mods go for used typically?

Cheapest I've seen was $70, all the way up to a little under the $156 new price for good enough condition and the right finish. In your price range it will probably be fairly worn, but they are basically indestructible.
 
Last edited:

DaveP

PV Master & Musician
ECF Veteran
May 22, 2010
16,733
42,646
Central GA
Baditude...I'm intrigued by the silver bullet. Does it have a way to lock the switch?

I'm sure Baditude will be back to answer, but it appears that the switch button is recessed enough to prevent accidental firing unless you have something in your pocket that's shaped just right.

I wish I could retrofit my 2013 Ram 1500 remote. They put wings on the buttons so that you have tactile feel in the dark. I put it in my jeans pocket with my keys and walk around in a store sometimes. When I come out to get in the truck, it's already unlocked. Design is everything. The really down side is that it also doubles as the key, so aftermarket isn't an option.
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
Baditude...I'm intrigued by the silver bullet. Does it have a way to lock the switch?
No. Why would you need to? The button is recessed and requires enough pressure that it would be extremely unlikely to accidentally autofire the button in a pocket. The button is designed similar to the buttons on elevators, so it will be extremely durable for a lot of use.

 
Last edited:

rhean

Super Member
ECF Veteran
Jul 10, 2013
444
240
Madison, Wisconsin
No. Why would you need to? The button is recessed and requires enough pressure that it would be extremely unlikely to accidentally autofire the button in a pocket. The button is designed similar to the buttons on elevators, so it will be extremely durable for a lot of use.


Ooh, that's really cool. btw, recessed buttons are excellent things. At this point I wouldn't buy anything that requires fiddling with the lock ring.

So no issues with keys hitting the button in your pocket?

I've never had a recessed button accidentally fire on me, and I've gone camping and hiking with these things. I also do not keep them near anything metallic, like keys.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread