New Projects by Atmomixani

Status
Not open for further replies.

alvinado

Super Member
ECF Veteran
Verified Member
Dec 28, 2010
387
193
US/SG
Not to be a low spot but. I anticipated a great day. My honest review and don't want anyones feelings hurt.

I am much dissapointed in the Nemesis. As I have owned and own many higher end devices I have a bit of exp with them, so please understand that I was expecting more. I ordered the Matte and own a few very nice matte finish mods. The Nemesis finish seemed dull and had a close friend, very reputable, desribe it as a dirty matte. I see this finish scratching very easily. The threads are very easily scratched unless one very slowley mates the female and male together and with ultimate care finds the thread to screw on. My threads have scratches upon delivery. There is also a white fog on the outside of the threads that after a steam clave and polish will not remove.
More bothersome to me is how the thread rings were were attached to the tubes as well as when the entire device is together, you can see each piece where they connect from the outside. Im not just talking about the threaded pieces but every piece welded or mated on the tube from production. That is dissapointing in a mod with such a future. I would gladly of paid $75.00 extra for none of that.
Aside from the fact that I have been looking for the brass(key)pin in the carpet for 45 minutes and cant find it because the button was a bit sticky and I was wondering why.

And let me add that their other devices are no less than awesome and beautiful.

Again, sorry to be a downer.
Be Well

Just got the nem today and I am sorry for your experience, personally I like it. I ordered the kalafun edition and I got to agree with you the the matte part is dark, and I like it because I can match it with the kayfun. THis is exactly what I have expected from a matte finish, if you get a shiner matte, that would be call "brushed".

I do find the thread very thin and like what you say hard to thread on, but from a conductivity standpoint, it is good as less current is lost when the threads are finer.

Talk to the people , the have the best customer service.
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
I know what brushed is. I own many brushed pieces and have finished many. I also understan conductivity and will not argue. I admit to be a bit on the picky side when it comes to the things I mentioned. Having many hard hitting devices, the conductivity is moot as well as V drop.
Thank you though. GL and Be well.
 
Last edited:

Loco69

Unregistered Supplier
ECF Veteran
Oct 30, 2011
495
1,156
51
Athens-Greece
www.atmomixani.gr
My one issue with the nemesis is that i have to press the button from right in the middle,otherwise the button would "stick" to the wall when given uneven pressure.

Check if bottom contact is well screwed and work it a few times without battery in your hand and will be ok..
 

Loco69

Unregistered Supplier
ECF Veteran
Oct 30, 2011
495
1,156
51
Athens-Greece
www.atmomixani.gr
A new upper cap for Nemesis fitting the Steam machine is coming... ;)

8753732188_e8943b69bd_z.jpg
 

TheCatsPajamas

Unregistered Supplier
ECF Veteran
Nov 10, 2012
731
936
44
San Diego
www.envisionvapor.com
A new upper cap for Nemesis fitting the Steam machine is coming... ;)

8753732188_e8943b69bd_z.jpg

When will the steam machine be available and where can I find more info on the different steam machines. I don't quite understand how they function differently from each other. Thanks


Sent from my Minds Eye
 

Loco69

Unregistered Supplier
ECF Veteran
Oct 30, 2011
495
1,156
51
Athens-Greece
www.atmomixani.gr
They are in production again so we ll have them soon

There is wick and mesh

Sm Vst and all the sokolataki are wick atomizers with ceramic using resistance and non resist wire
Sm Gini is a mesh atomizer

Sokolataki..There are 4 of them...Two normal and 2 mini...All of them are for dripping...And in its pair the one having stripes has less warm vapor than the one plain...
 

TheCatsPajamas

Unregistered Supplier
ECF Veteran
Nov 10, 2012
731
936
44
San Diego
www.envisionvapor.com
They are in production again so we ll have them soon

There is wick and mesh

Sm Vst and all the sokolataki are wick atomizers with ceramic using resistance and non resist wire
Sm Gini is a mesh atomizer

Sokolataki..There are 4 of them...Two normal and 2 mini...All of them are for dripping...And in its pair the one having stripes has less warm vapor than the one plain...

I'm really interested now! I prefer dripping to tanks and there isn't a huge variety of really nice dripping attys out there. It appears as though you are trying to change that.

So it appears as if the options are ..... Warmer or cooler vapor, wick or mesh setup, regular or mini, right? How much liquid do the regulars hold? Mini?


Sent from my Minds Eye
 

Loco69

Unregistered Supplier
ECF Veteran
Oct 30, 2011
495
1,156
51
Athens-Greece
www.atmomixani.gr
Sokolataki tube

with this you turn your steam machine into a dripping atomizer... usable with any 510 drip tip...
img_0033.jpg

img_0035.jpg


Sokolataki Ice tube

provides you less warm vapor..
img_0071.jpg


510 drip tip adaptor..

Turns your SM Vst in a drip tool without changing a tube.
st_m_0011.jpg

st_m_0014.jpg


and Sokolataki mini....for those who want small atty but with no discount in vapor performance..
st_m_0004.jpg

2012-09-03%2017.53.18.jpg


And Sokolataki mini Ice
8141201444_d6210b11eb.jpg


All of them if you put enough double wick can hold 8-10 drops...:)

I believe i have presented again here in Ecf but must be in a locked topic...:)

Also all of them come in shined finish..as shown in our site..here there are some photos of prototypes also..
 

eggylisk

Senior Member
ECF Veteran
Verified Member
Jul 16, 2012
96
54
san diego
Check if bottom contact is well screwed and work it a few times without battery in your hand and will be ok..

Z3Hsj1j.jpg


What can i use to lubricate the female part on the left with the male piece on the right for the bottom contact assembly? simple vaseline? Noalox? Silicone spray?
 
Last edited:

manji1

Super Member
ECF Veteran
Verified Member
Mar 11, 2013
556
453
46
Dayton OH
Final prototype of Dome genesis atomizer,,will be tested and after goes in production



8761590961_26fe903f93_z.jpg
Pic is a touch blurry but from what I can see it looks great. Hopefully I will be lucky enough to catch a Nemesis in the next batch and pick one of the up to sit on top of it. Can't wait to see a pic of the deck of the atomizer.
 

Loco69

Unregistered Supplier
ECF Veteran
Oct 30, 2011
495
1,156
51
Athens-Greece
www.atmomixani.gr
Specs of Dome

User can choose mesh hole and change it whenever he wants
Adjustable air angle and control of vapor temperature
Insulated mesh
Control of air flow
Choose of different air holes
Can be set uo with double u wick
Regulate decompression of tank system
Tank can be opened for cleaning or liquid change without ruin your set up
Control of vapor temperature

...Video will follow when we will start production!!
 
Status
Not open for further replies.

Users who are viewing this thread