New setup issue

[Pepsiblast08]

Ok so I just got my first setup. An Aerotank and a Vision Spinner. Now it fired just fine the first few times, but I was going to cook dinner so I turned it off and charged it. I come back, throw the tank on and now it isn't firing at all. The battery light comes on, but the tank doesn't seem to be getting power to it. I can taste the flavor from the previous few vapes I tried, but it won't produce new vapor.

 

[Pepsiblast08]

The charger works just fine so I'm wondering if maybe the Aerotank's battery connector can't reach the Vision Spinner? If so....damn, I can't really get another battery or tank for a while.

 

[happydave]

sounds like you might have pushed the center pin down in the battery.
using a tiny flat head screw driver or a pair of tweezers you might try pulling the pin back up.
Center Pin Issue - Fixing a non firing eGo battery - YouTube

the tank to battery connection should not be very tight, just barely snugged down.
if you over tighten the tank to the battery it will push that pin down.

 

[JBJohnnyB]

sounds like you might have pushed the center pin down in the battery.
using a tiny flat head screw driver or a pair of tweezers you might try pulling the pin back up.
Center Pin Issue - Fixing a non firing eGo battery - YouTube

the tank to battery connection should not be very tight, just barely snugged down.
if you over tighten the tank to the battery it will push that pin down.

I have had the very same issue before. The center pin fix is a gem. works almost every time.

 

[megatronlite]

Also try cleaning the connections.

 

[Pepsiblast08]

That was it. Raised the center connector and all is fine. Thanks!You don't know how much I appreciate that! I got home from work last night, put it together, and thought it was broken already.