New! Stainless Steel io6 Drip Tips!

[markfm]

An IO6 and sleeve.
I did find it a bear to get the second oring seated, even after lubing it, fortunately I had a tube mod with a really solid top cap.

 

[jkoppk]

Anyone know what size o rings the tips take,I shredded mine and would like to get some replacements and spares.

 

[UncleDagger]

Where are you guys getting your IO6's? I have never been able to find any standard or LR in stock on the ikenvape site. Is there a thread I can watch to see when they are available? I subscribed to the announcement thread but it hasn't been updated in a while.

I haven't ever tried an ikenvape atty not even a regular 510
Thanks,
J

 

[aliens]

The i06 are out of stock for a while. You can check the twitter of ikenvape sometimes. According to it, if I understood, the i06 should be in stock soon. This week or next week? I don't know!

 

[UncleDagger]

Thanks! 10char

 

[MrJonesJr]

Loved the tapered on my Reo...so had to get one for the Provari!

 

[liveone]

Got my Siam tip and sleeve for i06 today! Even and following the included instructions, it took some work to get it on but it's nice and snug now and I'm loving it. The 2nd o-ring gave me the most trouble and pushing it on resulted some o-ring shavings sliced off by the io6. I've had the io6 2.5ohm for a couple weeks now.

 

[5cardstud]

Where are you guys getting your IO6's? I have never been able to find any standard or LR in stock on the ikenvape site. Is there a thread I can watch to see when they are available? I subscribed to the announcement thread but it hasn't been updated in a while.

I haven't ever tried an ikenvape atty not even a regular 510
Thanks,
J

I just picked one up from Switchers site at https://www.jrcustomturning.com/

 

[5cardstud]

Well everyone knew I had to try them on the Fusions.

They work great there too.

 

[loft]

I've removed mine a handful of times and haven't had any oring shavings. What I do is place a drop of juice in the drip tip between the two orings, place it on the io6, and give it a fast clockwise turn ~180º to pass the first oring, and then another 180º spin to pass the second oring. YMMV, but this should help.

 

[x GRE x]

I love these tips they are well worth the cash, my only problems now are to use these or the i06DCA and trying to figure out where to get more attys.

 

[liveone]

I've removed mine a handful of times and haven't had any oring shavings. What I do is place a drop of juice in the drip tip between the two orings, place it on the io6, and give it a fast clockwise turn ~180º to pass the first oring, and then another 180º spin to pass the second oring. YMMV, but this should help.

It came packaged with clear instructions to do just that but it was very tight and it shaved off parts of the o-rings as if it was too thick. Once I got it on and cleaned out the rubber pieces, the o-rings look fine. They go all the way around and look undamaged. It's still snug but it's fine and I'm very happy with it.

The Siam sleeve however worked right onto the same atty with a little juice lube. No elbow grease required. Popped a ming style drip tip onto that bad boy and I'm very happy with that as well!

 

[5cardstud]

I love these tips they are well worth the cash, my only problems now are to use these or the i06DCA and trying to figure out where to get more attys.

They are here. Atomizers - io6 Series - IkenVape Store

 

[darco]

I am all over these driptips! There are what my Reo has been waiting for all this while

They are here. Atomizers - io6 Series - IkenVape Store

The store is still not online for purchase I think, there isnt any add to cart button anywhere on the products.

 

[5cardstud]

I am all over these driptips! There are what my Reo has been waiting for all this while



The store is still not online for purchase I think, there isnt any add to cart button anywhere on the products.

OOPS Sorry my bad.

If your in dire straights until it's up and running you can do like I did and pick them up from https://www.jrcustomturning.com/

 

[LegioX]

You folks with the Reo Grands make me want to grab one ASAP. These tips fit perfectly into the well when pushed all the way down? Fantastic. I think I need a new toy

 

[loft]

I haven't used a Reo in a long time but I want a VV Reo really bad. I might revisit them with a Kick... idk but yes the tips fit perfectly in a Rep Grand. Spillage might occur more with the Mini due to the reduced size of the catch cup.

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

 

[LegioX]

I haven't used a Reo in a long time but I want a VV Reo really bad.

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

You and me both buddy. Bottom feeding paired with Isaac's fantastic io6 is just too good to pass up. Not sure if I can wait the month+ for VV, I might make the dive for the standard. The kick is a great idea though for your already owned Reo. Otherwise PM me because I need one

 

[loft]

You and me both buddy. Bottom feeding paired with Isaac's fantastic io6 is just too good to pass up. Not sure if I can wait the month+ for VV, I might make the dive for the standard. The kick is a great idea though for your already owned Reo. Otherwise PM me because I need one

I've been using it on my VV bottom feeder but I absolutely hate the catch cup on it. It holds literally 2-3 drops of juice so if I over-squeeze, it's a mess.

 

[MikeE3]

I like the idea and looks of these metal drip tips. But when I have an 'all metal' connection from the atty to my lips, it gets too warm/hot. My lips actually get a chapped / dried out spot. This is why I like the Shiloette tips or a Delrin tip in the IO6DCA (that I'm lucky to have gotten from Isaac). Anyone else notice this? Or do I just vape too hard, too much?