New SX-350 Board from China

[DejayRezme]

Strange, makes no sense to me. A high end mod would never use gravity sensing.

Gravity sensing works ok for my Seven-22 and it's CHEAP but that's the opposite of "high end"? No one can dispute that a +/- button is simply more convenient and fast.

The time needed to adjust the power with gravity sensing is just 10 seconds of careful balancing vs. 0.5 seconds for a button.

 

[Visus]

people whining about the gravity controls when IMO its cool as heck. I hardly ever change my settings it stays at 24 watts all the time -- its so rare I cannot remember when I changed it last..

 

[DrBeaker]

Strange, makes no sense to me. A high end mod would never use gravity sensing.Gravity sensing works ok for my Seven-22 and it's CHEAP but that's the opposite of "high end"? No one can dispute that a +/- button is simply more convenient and fast.The time needed to adjust the power with gravity sensing is just 10 seconds of careful balancing vs. 0.5 seconds for a button.

I thought the same thing until I got one and tried it. It has 5 presets you can set to your liking. Only takes a second or 2 to change from one power level to another. Usually I find the sweet spot for the juice and leave it there. plus it has a bypass mode. Its too cool...

 

[Chewy-bot]

does it have provisions on the board for soldering connections from the usb charging board? I wonder how easy it is / could be to do the software upgrade from 30-35watts

 

[DrBeaker]

does it have provisions on the board for soldering connections from the usb charging board? I wonder how easy it is / could be to do the software upgrade from 30-35watt

The wires are conected to the usb board and the ends are stripped. I used my exacto and probe to clean up the holes on the board tinned the leads stuck them in the holes and had them soldered In about 30seconds. upgrade Is through the usb.

 

[Yellow Hawk]

I HAVE THEM! Or, a FEW. They are GREAT, let NO body tell u any different. The chinese can make quality, they usually DO NOT, there is MORE money, in JUNK. BUT this is a example of their quality. I am upgrading mine to 35 watts on 5.1-14 when the new firmware comes out. It has fired my .3 ohm Dripper, continuously for 30 min. off and on, and off, and on, and off, then on. NO hiccups. DOWN to 1.5vdc., 12.5 amps. This is a PIECE of equipment. Comes with a charger board, that has 4 wires, that solder to main board, and carry USB signal to it, as well as charging voltage. That is the way to DO IT. Sig. +, sig. -, u have 2 pins left, go +5vdc for charging, and - for charging. Board gives out 4.2 vdc for charging@1,000ma It's well thought out, MJUCH better than evolv's junk that cannot be bought, as he is selling them to his Commercial customers. I VERIFIED this, His "customer" said to ME, that he was almost out of 30's,he'd have to make a call and get more in quick. I did Not ask for info,he GAVE it. SO, no prompting, possibly garnering bad info.

 

[TruckerMSA]

How much are they?

 

[Relayer1974]

TruckerMSA just beat me to it. I'd love to have one to play with.

 

[Yellow Hawk]

Sorry, I got them under a verbal agreement NOT to reveal WHO, WHERE, WHY and How Much! Sorry, I know it sounds liie a cop out. But, such is life sometimes. I take such ageements seriously.
But, if all things remain as they are, I'd expect the selling price at retail, to be around 90$ or a hair less, maybe. But, who knows. I'll have the firmware on 5-1-14. that takes them to 35 watts, and pretty's up a few more things.(Makes them more exciting). And, More power down the road SHORTLY!

 

[Yellow Hawk]

if Anybody in my area, your welcome to come by,and observe! I have boxes of new DNA 30's,, and 20's, SX350's, the stuff people drool over. I MIGHT sell A DNA, but, that is ONLY a MIGHT. Can be observed in either RIR Reservation in S.D., or in Las Vegas. OR, on my boat in Baltimore Harbor, or wife's house in PA, S.E. PA.

 

[ghern90]

I had heard in another post that they were targeted for market at around $75.00. Whether that will happen remains to be seen. But the DNA is $50, but you have to buy the usb charging hub and switches.

 

[Yellow Hawk]

The DNA is not HALF the board that the 350 is. Isn't even CLOSE. Look at the low voltage limit. It prevents the low power use of ANY lower resistance atomizer, how low, you have to figure that out for yourself. I have a chart I drew up. But, that was for WORK. NOT open publication. BUT, think about it. You take a .7 ohm atty., and, since 4vdc, is the lowest it will go, that means currrent will = 5.71 amps., and power, MINIMUM, would be 22.84 watts, or 23 watts. For a LOT a BIT much, for a DNA 20, IMPOSSIBLE. THAT 4 volt lower voltage limit, really KILLS the usefullness of the DNAs. Ya, I've heard it all before, anybody using .7 ohms, will be using in excess of 23 watts, BULL. I've seen plenty of people running 12.5 watts. or TRYING TO, on DNA, or DOING it, on SX350, or even SX200 Mod, for about 100$ fully assembled tube mod. WHY else, would I be thinking of selling My DNAs.

 

[DejayRezme]

About the price, it's available from a danish online store for 53€:
YiHi SX350

 

[DrBeaker]

How much are they?

Pm Onedesign1 he may still have a few. Lighting fast shipping

 

[Yellow Hawk]

That is about 73$ in USD, + BIG time shipping, and the fact thgat they do NOT ship to the US. Well that's out. But, I figure thte price I quoted of SOMWHERE in the vicinity of 90$, or say 75-115$ would cover it pretty thoroughly. Anywhere in there would be fair. Comes with charging board, and 3, count em, THREE pieces of wire, about 5cm long each. As I remember, they are blue (light), white, and black. OH BOY. They are well packaged in anti static, and boxed, bubbled, and the like. IT is well taken care of. MIne have worked from the instant they were removed from bubble wrap, till NOW. At FULL POWeR, at .2 ohms. Actually, I ONLY tried .3 ohms, I did NOT care to try to get that last .1 ohm out of it. TOO much work. I have a original Atmomixani Nemesis, and I JUST bought the Atmomixani 3D, and I have hooked it up Hybrid. Oh yeah. I am building it between typing on this fool thing. Using 24 ga. wire, twisted. But, the screws are TINY. Thye DO have a flat washer under them though, as if someone anticipated the use of Non standard coils. YEAH atmomixani. THE BEST. A Preliminary test with a desktop Fluke, showed it at .23 ohms. I THINK that is close enough. NOW whrether that 3D can take the load for a very short time, before I take that wire out, and take it back up to .5-.75 ohms total, or something more human. I always shoot for .75 ohms. I NICE comfortable place, FOR ME! My kanger Pro Tank II, is setting at .8 ohms, I missed .75. DARNED. But, those little nano coils are HARD to guess at. I wound around the 2mm ReadyXWick "Thin". The new size of XC. 2mm, vice 3mm for the regular. It takes so LITTLE, 1 foot, could do about 25 coils or so. Works SO WELL in there too. Silica on top of XC, no coil on it though. SOme call it a taste wick, I call it a "taste BAD wick" when compared to XC. But, must be there, or it will leak. And, talk about blowing BOMBS. And, I am NOT a cloud chaser. My son, has that covered, the 37 yr. old Pizza hut delivery guy. I guess our genes skipped a generation. I hold a doctorate, and other post grad degrees. My wife, the same. And, STILL cannot undersatnd the need for checking the resistance of a dual coil every step of the way. Or, at ANY step of the way.

 

[Yellow Hawk]

IF you want a Evolv DNA 30, or 20, I MIGHT be talked out of one. It'd be TOUGH, but, could be done. As, I do NOT need the money. Everyone, pretty much knows what that means!

 

[Tlepre85]

Does anyone know where I can pick one of these up?

 

[ghern90]

so, what are you saying Yellow Hawk? That the rich deserve to get richer? LOL Us po folk can wait.

Tlepre85, I don't know of anyone yet other than overseas. Haven't seen it in the states yet and the samples are gone. So the wait begins.

 

[Yellow Hawk]

Say what you want, THINK what yhou want. And,there ARE examples RIGHT here in USA, and in the Great Lakota Nation. And, I do NOT feel the "NEED" to prove it by taking pics, or reading numbers off or any of that other happy horse garbage. ANY money I have, I EARNED, every bit of it. Lost Left leg, and part of right in Vietnam, and brain damage. Damage to right kidney, etc. etc. etc. etc. etc. Russian 152mm Artillery shell. Capt. USMC Disability Retired. 0202 Ground Intel. Now, many years of school later, I am a Doctor, a Business man, and a researcher.
Why is it that those who Have a few bucks put away, MUST take hits from those, who are too LAZY to go to school, and do it the hard way.

Rob Yellow Hawk

 

[TruckerMSA]

I thank you for your Sacrafice and service yellow hawk! I was military once so I understand.