New to the whole e-cigarette thing and I just got my eG0-c Type B with 1000mAh upgrade batteries. I have a couple Kanger T3 clearomizers on the way. It has been less than 24 hours and I have noticed the tanks that came with it (already filled with liquid when I got them) are leaking. Anything I can do to make them stop leaking until my clearomizers come in? Also, any other tips, tricks, general maintenance, or anything else I might need to know would be greatly appreciated.
New to e-cigarettes...TIPS???
- Thread starter GodAsMyth
- Start date
- th_trl_thread_readers 0
- Status
I have never had much luck with eGo-C type tanks. The only thing I noticed is that you have to press pretty hard when you stick a new tank in to make sure it seals completely. I don't like them at all.
Sent from my easy chair using brain waves.
Sent from my easy chair using brain waves.
They make a softer cap for eGo tanks that seal much better. Sorry, no quick fix that I know of.
Hi and welcome to ECF. The eGo "tank" system (cartridge+ atomizer) is prone to leaks. Have NO idea why they're still selling this system. eGo- C a good PV that fires @ 3.3 volts.
Welcome to the forum.......Just take it one day at a time! Congrats and good luck to you!!
Welcome, first thing is you have a decent mid level battery. It's the Upgrade so you can switch from 3.2 volts to 4.1 volts. Now to the leaky Kanger......I got two and I wasn't that impressed. There's a vid on here by DAM718 that goes over the Kanger's in depth, wicked good. Good luck.
^^ Its not the Kangers that are leaking. LOL
My advice is to take the stupid tank out of there and drip into the atty. You will want to put abour 3-4 drops in for every 4-8 puffs depending on your "hits". You will know when its time for more liquid. I personally think this would work the best for you til you get your T3s.
My advice is to take the stupid tank out of there and drip into the atty. You will want to put abour 3-4 drops in for every 4-8 puffs depending on your "hits". You will know when its time for more liquid. I personally think this would work the best for you til you get your T3s.
Sorry, I thought you had the Kangers.....When putting the Ego cartridge on make sure it's seated correctly. Push and turn to line up the button in a position that is comfortable to you. I ended up getting the Soft Silicone Cap replacements. The Ego C is now a backup, but a proven starter kit. Sorry I added to the confusion.
I use my eGo-Cs as my out and about vape gear...
and leave my mods at home.
I concur with Vapooreyes: The little plastic caps are usually the culprit.
It's hit or miss...some leak, I think the hole gets 'torn'- and I have some that are three months old- and work fine.
But, I did buy some of those silicone caps too, with some extra cartrages...they do seal around the atomizer better.
They also come with a hole already in them.
You will get the hang of it...
and welcome to vaping and ECF !
Best to You !
and leave my mods at home.
I concur with Vapooreyes: The little plastic caps are usually the culprit.
It's hit or miss...some leak, I think the hole gets 'torn'- and I have some that are three months old- and work fine.
But, I did buy some of those silicone caps too, with some extra cartrages...they do seal around the atomizer better.
They also come with a hole already in them.
You will get the hang of it...
and welcome to vaping and ECF !
Best to You !
- Status
Similar threads
- Locked
