New to vaping, JOYE eVic question!

[Compleete]

Hey everyone!

I'm just getting into vaping, and I plan on ordering an eVic starter kit. Only problem is I havent been able to find a CLEAR answer on what kind of carto's, clearomizers, tanks, or anything that would work well with this product. If anyone has some insight on my issue I'd appreciate some feedback tremendously! Thanks!

 

[CloudyDaze]

anything with a 510 thread. anything with an ego thread.

According to their website at least. They have pictures of ego threaded heads, and state that 510 heads work.

I'd personally go with the 510 heads as they will fit most mech mods, rather than needing an ego adapter.

 

[broseph]

Hey everyone!

I'm just getting into vaping, and I plan on ordering an eVic starter kit. Only problem is I havent been able to find a CLEAR answer on what kind of carto's, clearomizers, tanks, or anything that would work well with this product. If anyone has some insight on my issue I'd appreciate some feedback tremendously! Thanks!

Just about any tank or top will work with the eVic. You'll have a lot more trouble finding one that doesn't work than you will finding one that does.

I've used cartos, clearos, and rebuildables on mine. I have yet to see one that would not work with it.

 

[DetraMental]

510 tanks: 6ml or 3.5ml DCT (Dual Coil Tank), Smoktech Pyrex DCT Mini Tank, Small U-DCT Tank, AnyVape Mini Glassomizer, Boge F16 tank..... DBox Dube Clearomizer (eGo fitting), DV BCC Clearomizer(eGo fitting), these are but a few. Is this what you are wanting, the names?

 

[MoonLit_Water]

Yep anything with 510 or ego threading will work.
I use Protank 1, Protank mini 1, EVOD and T3 tanks on mine.

although you will need 5 posts here in the new members forum, and give the server time to update (it does so once an hour) before can post there, but in the meantime You can browse the eVic section of ECF

 

[Compleete]

Awesome, thanks a lot guys, I just wanted to make sure I don't get something that's going to be a pain, not working correctly or at all. Appreciate all the help!!

 

[Vapeaddikt]

An evic will fit pretty much any of them.

Most of the industry has standardized on the 510 connection which is what the eVic uses.

 

[steffen12345]

I have an EVIC and I use CE4 Clearomizer. When I put the clearomizer on the EVIC the EVIC automatically determines the ohmage to 1.7. The other numbers show 3.3V and MVR VV. I feel like I have to replace my "replacement heads" way too frequently. I get a burning smell and terrible taste after a few uses (maybe like 50 puffs). I also have been experiecing chest pains and I'm assuming I'm breathing in more then just vape (I smoked camel lights when I smoked for real about 30 cigs a day).

Can it be the E-liquid I'm using?
Is the auto ohm assigning feature from my EVIC causing the wick in the clearomizer to heat up too much?

I'm really at a loss and any insight would be amazing!

 

[camscrub17]

I use the ProTank II and loves it!

 

[OlDogNewTricks]

Hello and welcome. I have also use Smoktech and Boge cartomizers, a Protank 2, EVOD and RSST rebuildable atomizer. Haven't run across anything yet that it wont run. Love mine at 8 watts. Good luck and have fun!

 

[Sthur]

I have an evic and swap between my pro tank 2, smoktek dual carto, and octopus RDA. Like them all depends on the day or mood.

 

[ruid57]

This shows as my first post, but I have been vaping off and on for 3 years. I am into 5 months and sticking with it this time.

I own an eVic and everything I have tried (CE4, MT3S, EVOD, GS-H5 tank and all of my 510 tanks) works. I would pick up a 510/ego adapter just in case there is an issue.

Steffen12345 - I wouldn't use the auto feature. It is better to adjust the voltage to the carto, no matter what the ohms reads. I have coils that read the same resistance but one vapes better .2 volts lower than the other. For me 2.2-2.4 ohms at 3.6. to 4.0 volts is a good range, 1.8-2.0 ohms is good around 4.2 - 4.6V. After a while it will be natural and you won't have to guess at it. I would also recommend a bottom wicking clearomizer like the EVOD or MT3S, they are both built the same but the MT3S holds twice as much liquid.

 

[Steve T.]

I use the vivi nova 3.5 and a smok carto tank with low res cartomizers 1.8 ohm .
Both work awesome.

 

[rdacrazy]

Kind of off topic. But I absolutely loved my evic till I had it in my pocket and the thing snapped in half. Its a great mod. Just be careful of it.

Sent from my SCH-I605 using Tapatalk now Free