New Toys no instructions

[Couture]

Hi all,
I just got my new toys in the mail and they did not come with any instructions. I have no idea how to put ese things together or how to clean them.
HELP!

 

[Couture]

opps this would be helpful:
Kanger T3 eGo Bottom Coil Clearomizer
EGO *CEFour + V2 - 2.4Ω/ohm
Joye eGo-C Twist Variable Voltage 1000mAh Battery
MINI Vision Vivi Nova tank System - Plastic Tube

 

[PhreakySTS9]

If I were you, I would go ahead and start off with the Kanger T3's and the Twist, first make sure the Twist is charged up, I assume you purchased a charger for it? If not you will need to do so. Now with the Kanger T3s, you unscrew the base off the botttom (while upside down the whole time), pour eliquid down into the side of it in the reservoir and screw the base back on. Then thread it onto the ego twist, and vape away. What ohm Kangers did you order?

Here's a link with a diagram showing step by step instructions to fill the Kanger.

http://www.vaporalley.com/Kanger-T3-Bottom-Coil-HeadBase-Assembly_p_434.html

 

[Couture]

Thanks for the link. It is a 2.4. This is my first dive into vv things so I'm not real sure how to set the twist for the different tank things

 

[Adam the Aussie]

Easiest way to find your preferred setting with the twist is turn it down as low as it will go and start vaping. Turn it up a bit after each vape until you find your preferred voltage.

 

[Couture]

Thanks. I ordered the tanks in differed ohms and now I have to try and figure out how not to fry them.

 

[PhreakySTS9]

I would start at about 3.8volts, and slowly work your way up from there with a 2.4ohm carto. 4.2-4.4ish will probably be about right for you but you may want to crank it all the way up, just go slow so you don't miss your sweet spot without even realizing it.