Hello!--I've ordered the 901 kit and have received the kit from cigeasy and am really looking forward to quitting smoking soon. However, no instructions for first-time users included. Can anyone tell me where I can get the basics for beginners info? And is there any approximation as to how many cigarettes equals one cartomizer? Thanks so much! bbellus
New User
- Thread starter bbellus
- Start date
- th_trl_thread_readers 0
- Status
welcome
i'm new too so i have some fresh perspective sort to speak.
If you already tried it out and it tasty nasty its because there is some primer on it when it comes straight from the factory that you need burn through or clean off there are some guides on that as well. I didn't know about it when i started and just smoked through it.
I would say the very first thing to learn (after you figure out how to operate it) would be the inhalation method then you can start figuring out how to refill, drip etc.
a really good place to look for info is the EFC library if you go back to the main site here its listed.
There a guide to the inhalation method as well as good info on a lot of things for starting out.
Don't get overwhelmed but the amount of info out there. And there is a very long learning curve so you have to be patient and stick with it but its well worth it. I'm still figuring things out myself.
i'm new too so i have some fresh perspective sort to speak.
If you already tried it out and it tasty nasty its because there is some primer on it when it comes straight from the factory that you need burn through or clean off there are some guides on that as well. I didn't know about it when i started and just smoked through it.
I would say the very first thing to learn (after you figure out how to operate it) would be the inhalation method then you can start figuring out how to refill, drip etc.
a really good place to look for info is the EFC library if you go back to the main site here its listed.
There a guide to the inhalation method as well as good info on a lot of things for starting out.
Don't get overwhelmed but the amount of info out there. And there is a very long learning curve so you have to be patient and stick with it but its well worth it. I'm still figuring things out myself.
Welcome to the forum!!! congrats on getting a decent kit! eric pointed you where to go... Only thing is patience, and don't over do your vaping, like some of us did to start out 
Welcome bbellus, I'll be happy to help in any way I can.
First you should charge the batteries (the part with the light on the end). Put the threaded end in the charger and wait for the light to turn green. If your cartridges are pre-filled (and they probably are) you won't need to fill them to try it out.
Take the atomizer (the other metal part) and blow into the threaded end holding the other end over a paper towel. This should help remove any primer. There may not be enough in there to blow out though.
When your battery is charged screw the atomizer onto it, put one of your pre-filled carts on the hollow end of the atty. If your battery doesn't have a button on it just draw on it like a regular cig, but slower and longer. Don't inhale the first few puffs 'cause there may still be some primer on the coil and it tastes nasty. Give it a try and enjoy!
First you should charge the batteries (the part with the light on the end). Put the threaded end in the charger and wait for the light to turn green. If your cartridges are pre-filled (and they probably are) you won't need to fill them to try it out.
Take the atomizer (the other metal part) and blow into the threaded end holding the other end over a paper towel. This should help remove any primer. There may not be enough in there to blow out though.
When your battery is charged screw the atomizer onto it, put one of your pre-filled carts on the hollow end of the atty. If your battery doesn't have a button on it just draw on it like a regular cig, but slower and longer. Don't inhale the first few puffs 'cause there may still be some primer on the coil and it tastes nasty. Give it a try and enjoy!
I'm pretty sure you mean 902 kit - CigEasy only sells the KR808D-1 aka 902.
I just recived my kit this morning and Frank included a 2 page document covering the basics. If you didn't receive it I would PM/email Frank at CigEasy for a copy.
You're right. That would make my directions obsolete then, wouldn't it. A more experienced cartomizer user should handle this one I guess.
- Status
Similar threads
