NEW YIHI SX MINI ML CLASS!

[JimScotty0]

I discovered I don't have the new file SXmini_ML_Class_V2206-20160126-English.SXI.

Maybe @JimScotty0 will upload it to a file hosting site.

Ok, I created a shared Google Drive folder and placed the 2 v2.206 sxi files in there. One for the SXML and the other one is for the modders with the SX350J-2 chipset.

Yihi v2.206 Firmware

Someone please verify that you can access and download the files.

 

[ThunderDan]

Ok, I created a shared Google Drive folder and placed the 2 v2.206 sxi files in there. One for the SXML and the other one is for the modders with the SX350J-2 chipset.

Yihi v2.206 Firmware

Someone please verify that you can access and download the files.

Yep, I was able to access and download the ML file just fine.

Actually both files.

 

[ShowerHead]

Ok, I created a shared Google Drive folder and placed the 2 v2.206 sxi files in there. One for the SXML and the other one is for the modders with the SX350J-2 chipset.

Yihi v2.206 Firmware

Someone please verify that you can access and download the files.

I got this one. Thanks.

 

[Hyperspace]

Ok, I created a shared Google Drive folder and placed the 2 v2.206 sxi files in there. One for the SXML and the other one is for the modders with the SX350J-2 chipset.

Yihi v2.206 Firmware

Someone please verify that you can access and download the files.

Thanks for posting the file.

 

[JimScotty0]

Thanks for posting the file.

My pleasure, enjoy! I just don't know exactly what improvements they have made with it. If anybody can figure out any changes please let us all know. We probably won't be hearing anything directly from Yihi until they all get back from their holiday.

 

[Hyperspace]

My pleasure, enjoy! I just don't know exactly what improvements they have made with it. If anybody can figure out any changes please let us all know. We probably won't be hearing anything directly from Yihi until they all get back from their holiday.

I haven't noticed anything new yet. Maybe it was just bug fixes. The Chinese new year is almost over so we should he more about it in a few days. Hopefully they'll have some good news about the Q and the Pure release dates.

 

[Vlad1]

Ok, I created a shared Google Drive folder and placed the 2 v2.206 sxi files in there. One for the SXML and the other one is for the modders with the SX350J-2 chipset.

Yihi v2.206 Firmware

Someone please verify that you can access and download the files.

Not sure that's a good version to share. Maybe I'm experiencing an isolated problem but I'm noticing the auto screen orientation sometimes does not refresh correctly and displays the characters reverse & inverted.

Edit: More often than not in my case it will not refresh correctly. Reverted to 2.203 and problem went away. Reinstalled the 2.206 and problem came back.

 

[Nosterdamus]

they say here on FAQ page this:

"Q:I just upgraded my device to V2.203, found there is V2.206 for boardSX350J-V2, any different between V2.203 and V2.206 ?
A: SX Pure function inside V2.206 support the Atomizer-with SX Puretechnology-from ipv company. If you have their new atomizer, you need upgradeto V2.206. or no need upgrade one more time"

i think that there is nothing new for ml with 206 ver

 

[2legsshrt]

Has anyone noticed they are getting better battery life on the ML then on the M. I'm using HG2's and on the M I get 28000J on the ML I get 30000J.Hmm thats in eco mode at the same setting I use on the M.

 

[2legsshrt]

Hey there was something lese I was wondering about. If I wanted to use the SXI Q S settings and I normally vape at 17J. If I wanted to have it go up to about 20J to start and then drop down to 17J to the end and then to drop off to about 14J how would I set that with the software using watts. I don't quite understand that part of the software.

 

[Vlad1]

Hey there was something lese I was wondering about. If I wanted to use the SXI Q S settings and I normally vape at 17J. If I wanted to have it go up to about 20J to start and then drop down to 17J to the end and then to drop off to about 14J how would I set that with the software using watts. I don't quite understand that part of the software.

You wouldn't. If your configuring a Q curve for a Temp configuration it will be in Joules, If configuring for a Power configuration it will be in Watts. Your curve would look something like this for a Temp Limiting configuration depending on the Time intervals you chose to make the adjustments.

 

[Jake67]

Has anyone noticed they are getting better battery life on the ML then on the M. I'm using HG2's and on the M I get 28000J on the ML I get 30000J.Hmm thats in eco mode at the same setting I use on the M.

I can't track my joules due to the manual TCR value that shows on the screen in Joules mode. I have to rely on the meter. That was a great feature for sure.
I hope they change that.


Sent from my iPhone

 

[Vlad1]

I can't track my joules due to the manual TCR value that shows on the screen in Joules mode. I have to rely on the meter. That was a great feature for sure.
I hope they change that.


Sent from my iPhone

I don't really care for having the TCR on screen either and would prefer the joules counter. But I don't usually watch the joules used until I replace the battery. And since the joule counter continues in the background when in manual TCR, when the battery is low I'll just change modes to my Ni configuration and see what Joules were used.

 

[KGB7]

The buzzing sound hasn't been resolved in firmware 206, could be the reason they haven't officialy posted it on their site.

 

[Vlad1]

The buzzing sound hasn't been resolved in firmware 206, could be the reason they haven't officialy posted it on their site.

I admit my hearing isn't as good as some but if your talking about the humming sound heard when holding the fire button down when in the menu system I suspect that's switching to prevent power from going to the coil while in the menu system. I cant hear it unless I hold it up to my ear while in the menu but of course then I cant see what I'd be adjusting. If that's what your talking about I doubt that's anything they're working to resolve but you could drop them a line and see what they say at cservice@yihisxmini.com

Is no one else noticing the display characters to be reverse and inverted with 2.206 with Display Auto set and changing the orientation of the device? I tried the update several times and it was persistently a problem for me with 2.206 but not with 2.203.

 

[KGB7]

I admit my hearing isn't as good as some but if your talking about the humming sound heard when holding the fire button down when in the menu system I suspect that's switching to prevent power from going to the coil while in the menu system. I cant hear it unless I hold it up to my ear while in the menu but of course then I cant see what I'd be adjusting. If that's what your talking about I doubt that's anything they're working to resolve but you could drop them a line and see what they say at cservice@yihisxmini.com

Is no one else noticing the display characters to be reverse and inverted with 2.206 with Display Auto set and changing the orientation of the device? I tried the update several times and it was persistently a problem for me with 2.206 but not with 2.203.

203 was supposed to fix buzzing when firring it and it didn't, so was hoping 206 would fix it.

Haven't noticed the issue with characters, as I have it manually set to left.

 

[Jake67]

I haven't installed the 2.206 yet. I guess my hearing isn't great either. I don't hear any buzzing when firing the device.
I use the joules to measure how different batteries preform. I tried the AW 3000 on the M and was getting over 30,000 joules. I guess I'll try going into the preset to get a reading.



Sent from my iPhone

 

[JimScotty0]

I haven't installed the 2.206 yet. I guess my hearing isn't great either. I don't hear any buzzing when firing the device.
I use the joules to measure how different batteries preform. I tried the AW 3000 on the M and was getting over 30,000 joules. I guess I'll try going into the preset to get a reading.

Sent from my iPhone

I don't hear anything when putting it up to my ear.

Not sure that's a good version to share. Maybe I'm experiencing an isolated problem but I'm noticing the auto screen orientation sometimes does not refresh correctly and displays the characters reverse & inverted.

Edit: More often than not in my case it will not refresh correctly. Reverted to 2.203 and problem went away. Reinstalled the 2.206 and problem came back.

@Vlad1 I am able to repeat the screen issue you are having. When I have it set on auto rotate I am sometimes seeing the screen upside down, mirror image or both together. But not always. I will explore further.

Edit: I am also seeing the mirror image when using the menu system.

 

[Vlad1]

203 was supposed to fix buzzing when firring it and it didn't, so was hoping 206 would fix it.

Haven't noticed the issue with characters, as I have it manually set to left.

I know their notes state "Fixed the scan buzz sound when firing in Joule mode." whatever that means, I'm not sure it's the same thing your hearing and part of the reason I suggested dropping them a note.

 

[Vlad1]

I don't hear anything when putting it up to my ear.

@Vlad1 I am able to repeat the screen issue you are having. When I have it set on auto rotate I am sometimes seeing the screen upside down, mirror image or both together. But not always. I will explore further.

Alright glad to hear, was beginning to think mine was dodgy. I went through probably 4 updates and it was pretty consistently doing it every time with 2.206 so I reverted back to 2.203.