NEW YIHI SX MINI ML CLASS!
- Thread starter smokyribs
- Start date
- th_trl_thread_readers 0
- Status
I haven't Jake I have gotten so used to my M's I only have a problem with one of them I thought these were much more of a task, wasn't sure if I was cross threading it or just screwing it in against the resistance and very crunchy.
I'm really not sure how I would use those custom settings on TC I just set everything on the device itself. IDK why I would need to use something custom unless maybe I wanted to start out with a strong vape and end with a weaker one.
I'm really not sure how I would use those custom settings on TC I just set everything on the device itself. IDK why I would need to use something custom unless maybe I wanted to start out with a strong vape and end with a weaker one.
I've used it just to have a faster ramp up, then down in 2.5 joule steps to my normal setting.
Seems to work ok, but for that use, not much (any) different than powerful or powerful+
I have found that I get a 'flutter' on both the MLs I have when setting the initial to 50J then stepping down to 30J. And that flutter lasts as long as I hold the fire button, IOW it isn't related to the initial higher power.
This is on a Crown tank using a SS 430 28 Ga 6/5 wrap at .46 ohms.
Take the tank off, put it on an RX 200 or eVic-Mini it does not have the flutter.
WooHoo!
My White SX has hit the U.S
My White SX has hit the U.S
Not yet bud, they are a Pre-order, should be ready to ship very soon.
.EVA Stainless Steel SX Mini ML Class battery cap replacement
Quality bud, mines reached Germany, Next stop UK (hopefully)WooHoo!
My White SX has hit the U.S
Went to my local Vape shop to get the wife's juice tonight, my rewards card is maxed. 25% off anything in store, plus another $20 off coupon.....gonna make my Silver/black SX $130.00 [emoji41]
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Bargain, the black and silver is a beauty!
My white ML is out for delivery, will have it today!! Good on YiHi paying for such fast shipping
Couldn't wait, popped back on my lunch break, this thing is very slick, beautiful finish! Also it feels great, the gloss finish is really smooth, Yihi did an awesome job here!
Thanks Yihi, quality prize! Also got a skin in red (not the colour I would pick but I'm not complaining!)
Thanks Yihi, quality prize! Also got a skin in red (not the colour I would pick but I'm not complaining!)
Last edited:
Alright I've received the 27g Nife48 wire from Zivipf. TC regulation seems to be really smooth and wire much more durable than Ni200 but I am in question of the best TCR, build type etc.. Looked at the other thread but not sure final recommendations had been obtained yet or perhaps I've overlooked them. What's the best build and TCR your finding to use at this point in time?
Depending on deck space, I'm running from 7.5 to a 9.5 wrap, 2.7 mm spaced at 405 (4036 is SE standard), temps at 480 - 520.
I use 0.00405 on the VF SX 350 and M-Class with a Temp Compensate of 21°.
On my DNA 200's I use either the same TCR or the TFR listed at Steam Engine.
Congrats on getting the RIGHT wire. [emoji106]
ETA: Seeing the other Nifethal 52 expert [emoji6], Landman, I should say something about build specs, wattage & set temperature:
On the 350's I am at 440 or 450F @ 40-45 joules.
On the DNA 200 I am from 450-480 F with wattage between mid-40's to +70 watts depending on desired flavor and vapor.
Resistance from 0.13 Ω to 0.23 Ω with 7 to 9 or so wraps dual coils...N.B., talking either 26 or 27 awg.
Last edited:
Thanks, was really looking for confirmation. I'd concluded .00405 to work well. I actually preferred vaping it higher at .00450 but that seems to cause it to run a little hot when it runs dry. I'm still looking for the best build but so far I'm having best luck with torched, spaced, dry burned then wicked. Have done a couple contact coils of different size but they both popped a lot for some reason (could have been wicking) idk but I'm running a .28Ω and a .375Ω spaced right now and they're both smooth as butter.
Across several attys, dual and single, I only use contact coils, pulsed on my rDNA at 20 watts, compressed with ceramic tweezers as needed.
Then dry-burned/pulsed and re-wicked as needed, usually every 15-20 ml.
She made it.....Great Prize, YiHi is amazing.....
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It's a real beauty isn't it! I haven't seen a white mod finished so well, Yihi did an amazing job.
I'm tempted to keep it but I'm plenty happy with my black one. Might sell it and start a saving jar for the Q class.
Gonna be a long 2 weeks waiting for more info, also want to hear some more about the sx pure!
I am just preying all the Q class early adopters keep complaining about weight to put me off
Definitely don't wanna see any posts telling me how wonderful it is
My bank manager is not happy with this forum already
Haha yeah I know the feeling! I'm after a dicodes box and a Q class, couple more tanks then I'm taking a little break from forums and enjoying what I have!I am just preying all the Q class early adopters keep complaining about weight to put me off
Definitely don't wanna see any posts telling me how wonderful it is
My bank manager is not happy with this forum already
Well that's what I keep telling myself anyway
- Status
Similar threads
- Locked
