Newbie question on a Genesis Build

[roosterado]

I have a newbie question about a Genesis build I just did. . Last week I did a Stainless mesh wick coil with 32ga Kanthal A1[ all i had] 5/4 wrap and got 2.4 ohm [1wick]After vaping on it for 1 week its now 3 ohm.Tonite I did Decided to use 32ga on a dual wick RSST same mesh 5/4 wrap.Came out at 1.4 ohm.OK I have been vaping on it for about 1/2 hr on my Seigeli 20 watt and its down to 1 ohm?

Its vaping medium size clouds with 60vg 40 pg course the dual wick RSST has airflow control

 

[steved5600]

Probably a short on one of the coils on the dual build. May not have oxidized the mesh good enough. Look up a cheat on mesh using cigarette papers. You can spot a short on the mesh buy looking for a kind of spark where its shorted. you will also see hot and cold spots. The change in the first build you mentioned could be a lose connection or a short that went away.

 

[joaquingt]

After you coil the mesh use a multimeter to check the ohms if is safe and no shorts use a not fully charged battery on a mesh and pulse it until all the coils light evenly, for the dual coils the formula is (ohm1 + ohm 2) /4


Sent from my iPhone using Tapatalk