nhaler drip tips dont work
- Thread starter slowdrag
- Start date
- th_trl_thread_readers 0
- Status
Between the wife and I we probably have a dozen various drip tips for 510, 801 and 306 atty's and they all work fine. I assume you are using 510's and probably are dripping too much at once, that is when I notice "liquid lock", try just 2 drops at a time with a light blow into the tip, 3-4 drags, repeat. Also, give it a daily hot water rinse and roll up a paper towel and run it through the tip to dry, that also seems to keep them working well.
If you are using LR atty's, you might try the LR306 with drip tip. They are fantastic atty's that use the same connection as a 510 and the design of it makes dripping much easier.
If you are using LR atty's, you might try the LR306 with drip tip. They are fantastic atty's that use the same connection as a 510 and the design of it makes dripping much easier.
I've been using them for months and love them! Would never go back to cart fiddling for anything 
Send me an email with your order number and we will replace it for you...A couple of the first pink ones were a little tight with some cartomizers...Thanks
Drew
DGliem00@gmail.com
Using 2 of Drews original black drip tips on 510 and 901 mods. They work great, never get liquid lock. I do use his Octane juice in various flavors, never a clog and I vape constantly. They get rinsed out and cleaned every few days, wiped all the time due to lipstick buildup, but other than that....easy breezy.
I have 5 drip tips total (mostly 306) from Drew and haven't had a issue with liquid lock really. If I manage to hit the side while dripping I just blow in it and down it goes.
) from Drew and haven't had a issue with liquid lock really. If I manage to hit the side while dripping I just blow in it and down it goes.
I've had both a 510 and an 801 drip tip break at the O ring. Drew told me to mention it in the comments section when I place my next order and he would include it. Problem is, I haven't found anything there I'm willing to order knowing I'll also have to pay $7 for shipping.
Well I broke down tonight and was going to go ahead and order a 306 LR atty and 306 drip tip. But it kept telling me the discount code: saveinnj is invalid.
I guess I'll just be without the 801 drip tip and try to wait until EM finally start selling LR 306s to try it out.
NOTE: when I purchased the 510 and it broke, Drew did tell me it was a bad batch and replaced that one. The replacement is still in my 510 drip tip rotation.
Well I broke down tonight and was going to go ahead and order a 306 LR atty and 306 drip tip. But it kept telling me the discount code: saveinnj is invalid.
I guess I'll just be without the 801 drip tip and try to wait until EM finally start selling LR 306s to try it out.
NOTE: when I purchased the 510 and it broke, Drew did tell me it was a bad batch and replaced that one. The replacement is still in my 510 drip tip rotation.
hey AB...I just cehcked the site and the Saveinnj coupon code is valid and working....Thanks
Drew
Drew
You don't make any sense...you complain about $7 on shipping with 10% off but will go buy from a place that has a $50 minimum and $17 shipping for inferior knockoff products...?
Nhaler's LR 306 with drip tip are fantastic, if you haven't tried them you really are missing out.
HUH!
When did EM come up with a $50 minimum and what knockoffs? Last time I checked here at ecf NO attys are made in the USA. Which product are you referring to as inferior; the Riva?Which makes more sense to you, getting the same attys for $9.00 a pop or $3.00 a pop? I don't know what they will charge for their 306s but I know of US venders selling them for $5.00. Out of three Nhaler drip tips I purchased from Nhaler, 2 broke off at the O ring. Only one was replaced with me being required to make another purchase if I want to get the second replaced. And DREW acknowledged they were from a bad batch!
How about you purchase from the vendors you want to and respect others that choose to spend their money where they are satisfied with the product and customer service. Drew can look up my account info and correspondence. He knows I'm not a troll. YOU need to pull out your 306 and some good juice and chill...
Hey Drew,
Was your system going through maintenance or something around 4:30 CST? I ask because not only did the code not go through, it kept deleting my personal info telling me to enter it. As you know, when I log in it automatically fills in the blanks. But whenever I pushed the continue button during the checkout process it would delete it. It happened several times even when I reloaded the page before allowing me to go on. That along with the code not working... I just figured the system may have been doing maintenance or something.
You have my account history and correspondence. You probably can go on the system and verify that I did attempt to place an order. You know this isn't a troll post. I don't know where 'debook" is coming from if he doesn't know my order or correspondence history.
You know what, you are correct, at least to a point and I apologize if you feel I have offended you. I do however take issue when one posts they are going to wait for a knock off product, the LR306 in this case as you stated. I get that you had issues ordering, but give Drew a chance to respond - His customer service is rated #1 for a reason.
Anyway, its Friday, time to go play nine and hang out on the 19th with my Woodie!
Anyway, its Friday, time to go play nine and hang out on the 19th with my Woodie!
You know what, you are correct, at least to a point and I apologize if you feel I have offended you. I do however take issue when one posts they are going to wait for a knock off product, the LR306 in this case as you stated. I get that you had issues ordering, but give Drew a chance to respond - His customer service is rated #1 for a reason.
Anyway, its Friday, time to go play nine and hang out on the 19th with my Woodie!
Again, how is ordering something from the actual manufacturer a knockout? By your standards all suppliers that aren't sell custom mods are selling knockoffs.
Good luck on the Green.
I have had a little better luck dripping when I hold my pv at a 30 degree angle rather than straight up and down. But I still say the hole is too small could I please get a bigger hole. Have you ever noticed that anything to do with ecigs theres a tip or trick to get it to work. I mean how difficult can dropping drops out of a bottle into a small hole be. ughhhh nevermind.
Yeah I had problems with juice in the 510 drip tips and with some delrins I picked up someplace else. Having to angle or blow juice down sorta defeats the point. I use my other 510 drip tips because they're much wider all the way down. The two 801s I picked up at Nhaler have larger openings but still narrow in the middle. So with the one that didn't break apart I have to occasionally blow the juice down. That's why I got them clear, so I can see when juice is trapped.
I'm not the type to pay $20 for a drip tip just because of it's name. I can get two at Nhaler and 5, actually 6 at other places for that amount. Funny, the ones for three bucks have large openings and don't narrow. Needless to say I use those mostly.
When the attys are really hot, I do give them a quick blow after I drip to cool it off so I don't get hot juice in my mouth.
I'm not the type to pay $20 for a drip tip just because of it's name. I can get two at Nhaler and 5, actually 6 at other places for that amount. Funny, the ones for three bucks have large openings and don't narrow. Needless to say I use those mostly.
When the attys are really hot, I do give them a quick blow after I drip to cool it off so I don't get hot juice in my mouth.
- Status
Similar threads
