Greetings Everyone!
Many of you may recognize me as V Ninja, the guy behind the scenes of "that blog".
I have been hard at work designing and developing an advanced hybrid personal vaporizer, among other things, and am proud to present Ninja mods, and the new Odachi AHPV.
[/IMG]
Key features include:
-Single Piece design: Entire battery tube and atomizer assembly is machined from a single piece of material.
-Adjustable air control from 0-1.5mm.
-Automatic battery adjustment system intuitively adjusts to fit your battery as you tighten the switch.
-Bottom button, short-throw <1mm, slightly recessed switch.
-18650 or 18350 versions
-Will be made in a range of materials, starting with SS 304/316.
-Dual O-rings for the top cap.
-Thick Pyrex tank to resist falls and general abuse; Custom, fully-worked Swag tanks will be available.
-Width:22.225mm, length varies depending on configuration.
-Reduced Chamber design, 3mm single wick hole; 4-5ml tank capacity (650), 3ml capacity (350)
My original vision was to create a hybrid that spared no expense when it comes to the conductivity. This meant combining all contacts that normally would be threaded or press-fit into a single piece of metal; Originally, my vision was an anodized aluminium hybrid, but due to the backlash against the use of aluminium in PV's, I have since made the decision to make them mainly out of Stainless. At this time, all production and finishing will be in the USA. I anticipate a highly-polished finish, as I'm a sucker for shiny things.
Let me know what you think! If you have any questions or suggestions, please feel free to PM me anytime.
Thanks so much for your support of this new and exciting venture! I hope to serve the community to the best of my abilities, as this is truly A Device By Vapers, For Vapers. All suggestions will be considered for use in the final design!
My timeline is about 1-2 weeks until the prototypes are in my hands, and about 1 month to six weeks from today, I should have units available for purchase. Retail price is as of now undetermined.
Many of you may recognize me as V Ninja, the guy behind the scenes of "that blog".
I have been hard at work designing and developing an advanced hybrid personal vaporizer, among other things, and am proud to present Ninja mods, and the new Odachi AHPV.

Key features include:
-Single Piece design: Entire battery tube and atomizer assembly is machined from a single piece of material.
-Adjustable air control from 0-1.5mm.
-Automatic battery adjustment system intuitively adjusts to fit your battery as you tighten the switch.
-Bottom button, short-throw <1mm, slightly recessed switch.
-18650 or 18350 versions
-Will be made in a range of materials, starting with SS 304/316.
-Dual O-rings for the top cap.
-Thick Pyrex tank to resist falls and general abuse; Custom, fully-worked Swag tanks will be available.
-Width:22.225mm, length varies depending on configuration.
-Reduced Chamber design, 3mm single wick hole; 4-5ml tank capacity (650), 3ml capacity (350)
My original vision was to create a hybrid that spared no expense when it comes to the conductivity. This meant combining all contacts that normally would be threaded or press-fit into a single piece of metal; Originally, my vision was an anodized aluminium hybrid, but due to the backlash against the use of aluminium in PV's, I have since made the decision to make them mainly out of Stainless. At this time, all production and finishing will be in the USA. I anticipate a highly-polished finish, as I'm a sucker for shiny things.
Let me know what you think! If you have any questions or suggestions, please feel free to PM me anytime.
Thanks so much for your support of this new and exciting venture! I hope to serve the community to the best of my abilities, as this is truly A Device By Vapers, For Vapers. All suggestions will be considered for use in the final design!
My timeline is about 1-2 weeks until the prototypes are in my hands, and about 1 month to six weeks from today, I should have units available for purchase. Retail price is as of now undetermined.
Last edited: