Noob-Lambo ???s

[gsolo19564]

I've been analog free just over a month now. New to these forums. I started with V2cigs and have loved it. I recently(today) recieved my first VV mod. I got a Lambo 4.0. I have figured out most of the settings and how to use it. I would have posted this in the APV forum but this is my first post.
I recieved a 2.5ohm CE4 clearomizer with it.
What's a good voltage to start vaping with it? I started at 4 volts but don't think Im getting the vapor I expected.
What's a recommended resistance and voltage setting for the Lambo?
I read somewhere that 5volts was the 'sweet spot'. If I move mine up to that it tastes burnt. Any suggestions for this?
Thanks and good luck to all the other new vapors.

 

[*deleon517*]

clearo's generally dont taste good over 4.5v-ish. i would either look into one with a lower resistance around 2.0ohm at 4volts is a pretty good setup.... as far as sweet spot everyone has a different idea of good. i run several different ohms at several different voltages.

 

[gsolo19564]

I'm thinking I want to get a tank for it. I have one for my pass through for my V2s but it's 808 threaded. i was just going to use what came in my lambo kit then get something that i could play around with the resistances and find out what was right for me. Was just hoping to find a good starting place

 

[*deleon517*]

many people like the vivi nova, holds 2.8-3ml's of juice and the kits come with 3 different replaceable heads in 1.8, 2.4, and 2.8ohm so you can find your favorite... you can then get into rebuilding coils and wicks when replacing or just buying new heads in your favorite ohm. most local florida shops carry them as well as most online vendors

 

[myyrkezaan]

The sweet spot is where ever you can find it based on the resistance, carto/clear wicks, juice, pg/vg ratio.

I just tried 5.2 on a 2.8(2.7 actual) vivi tank and 5.2 on a 2.4 (2.2 actual) clearo and it worked ok. Problem is you start burning faster than the coils can wick with multiple hits and the lower coil clearos have thinner wicks.

Plus you drain the batteries quite a bit faster.

 

[robtest]

On a Lambo v4, if you click the "fire" button 5 times, it should display your ohms resistance on the tank/clearomizer...

Then look it up on here to find a suitable voltage ...

https://s3.amazonaws.com/data.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

 

[tartanraven]

I vape 24ml juice at 4.2volts with a V-Core 2.0 Splitfire (2.3ohm) (the V-Core is similar to the Vivi Nova) on my Lambo 4.0

 

[gsolo19564]

I have seen that chart before, thanks though. Good to actually have a link to it. The resistance was 2.4. I think about 4.2v is the best I was getting out of it for CE4 I had hooked to it. I just got 1 x MINI Vivi Nova Tube/ End Caps
1 x 1.8ohm Atomizer Head
1 x 2.4ohm Atomizer Head
1 x 2.8ohm Atomizer Head

Figured I could play around with the resistance and see what I liked best.
Thanks for all the tips.