Not getting the draw that I want

Status
Not open for further replies.

Stef64

Ultra Member
ECF Veteran
May 5, 2011
2,047
1,223
Michigan
Ok so I'm using a lava tube with a 1.5ohms dual carto and I'm not seeming to get a nice big cape that I would like. I'm using 4v but I know that the lava tube has the safety measure so its probably hitting somewhere around 3.7-3.9v. But is there a tip or trick that I could so to get a stronger draw?

The 1.5 ohm dual coil cartos have 2 coils at 3 ohm each. You should be pushing closer to 5V to get a decent hit out of those - your LT would not be able to handle the amps. Your best bet is to switch to single coil cartos. Get yourself some single coil cartos at 2.4ohm or above and you will get a better hit (with the proper voltage).
 

Stef64

Ultra Member
ECF Veteran
May 5, 2011
2,047
1,223
Michigan
Thanks stef I have already ordered some better cartos and a vivi nova tube as well. I just have a bunch of these 1.5 dual coils and don't want them to go to waste

You can't go wrong with a ViviNova. I really like the 2.4 ohm heads at 4.5V. Good TH and plenty of vapor and flavor. The heads are easily replaceable and you can even replace the wick/coil if you so desire.

LT with VN.jpg
 

elmattias

Resident Miyagi
ECF Veteran
Verified Member
Jul 16, 2012
1,947
1,191
40
N'awlinz
The 1.5 ohm dual coil cartos have 2 coils at 3 ohm each. You should be pushing closer to 5V to get a decent hit out of those - your LT would not be able to handle the amps. Your best bet is to switch to single coil cartos. Get yourself some single coil cartos at 2.4ohm or above and you will get a better hit (with the proper voltage).

I second this...check out ikenvape...they have the best cartos around.

Sent from my EVO using Tapatalk 2
 
Status
Not open for further replies.

Users who are viewing this thread