NotCigs refugee thread
- Thread starter FranC
- Start date
- th_trl_thread_readers 0
- Status
Darn, Bov. Seems like that took a long time to get to you. RMV had all colors in stock on Monday but, they are down to blue, silver and red now. Full kits only. They are selling like hot cakes it seems.
I am glad that you have it now though
Good night, Fran. Sleep well.
I am glad that you have it now though
Good night, Fran. Sleep well.
Sweet dreams Fran
Salem, I ordered it last weekend so I knew it wouldn't go out in the mail until Monday, and I didn't pay for priority shipping. RMV was out of the silver that I wanted so I ordered from 101Vape in Cali.
Oly, I have psoriatic arthritis in my lumbar and sacral vertebrae with bone spurs, so I know how hard it is to stay motivated to keep those muscles stretched and strong. The way I look at it is I'm gonna hurt anyway, I may as well get something done to show for it. It sounds like you have much more pain than I do, I hope you can get some relief.
Salem, I ordered it last weekend so I knew it wouldn't go out in the mail until Monday, and I didn't pay for priority shipping. RMV was out of the silver that I wanted so I ordered from 101Vape in Cali.
Oly, I have psoriatic arthritis in my lumbar and sacral vertebrae with bone spurs, so I know how hard it is to stay motivated to keep those muscles stretched and strong. The way I look at it is I'm gonna hurt anyway, I may as well get something done to show for it. It sounds like you have much more pain than I do, I hope you can get some relief.
I whipped that Goblin's azz......
There were notes taken in the failures....First I used a torch tip cleaner and filed off the wire cutter burrs...Then I screwed the chimney off and on until it would start easier...I added a little gun oil and brushed the threads with a tooth brush sized SS wire brush...Then I upped the gauge to 28 from 29...The 29 simply wouldn't stay over the air hole...Set up with 2 10 wraps...I pinned the hot lead in contact with the post while I sorted the negative lead...then I sorted, leveled and positioned the positive lead...about 1000 times... Finally it was over the air hole....level and most importantly it cleared the chimney...When sorted correctly the wick was no problem...These wicks I cut to totally cover the juice channels....a little shy of .08 ohms running at 13 watts....It's a Hell Hammer for sure but not really sure the juice is worth the squeeze....Unless a trying build is what you want I don't suggest the purchase...I've got a huge pile of coils that I couldn't sort out correctly...
My WolfPack is heading too the Sweet Sixteen !!!!!!!!!!!!!!!!!!!!
There were notes taken in the failures....First I used a torch tip cleaner and filed off the wire cutter burrs...Then I screwed the chimney off and on until it would start easier...I added a little gun oil and brushed the threads with a tooth brush sized SS wire brush...Then I upped the gauge to 28 from 29...The 29 simply wouldn't stay over the air hole...Set up with 2 10 wraps...I pinned the hot lead in contact with the post while I sorted the negative lead...then I sorted, leveled and positioned the positive lead...about 1000 times... Finally it was over the air hole....level and most importantly it cleared the chimney...When sorted correctly the wick was no problem...These wicks I cut to totally cover the juice channels....a little shy of .08 ohms running at 13 watts....It's a Hell Hammer for sure but not really sure the juice is worth the squeeze....Unless a trying build is what you want I don't suggest the purchase...I've got a huge pile of coils that I couldn't sort out correctly...
My WolfPack is heading too the Sweet Sixteen !!!!!!!!!!!!!!!!!!!!
Yep, LD. We have been watching those games too. 
Just in case anyone here needs some, I got this email today and it is a good deal on PG and VG.
Thank you for ordering your VG and PG from Essential Depot. We are moving our VG and PG production facilities and lab into a new 3.75 acre location on the 28th of March (in 7 days). In the meantime (while stocks last at current location) we are discounting all our VG and PG products accross the board by an additional 15% (this week only) to minimise the amount we have to transfer to the new facility.
You can review the crazy pricing for the next 7 days, on all our finest quality USP grade VG and PG offerings at:
VG Inventory - CLICK HERE
and
PG Inventory - CLICK HERE
Thank you consideration of this offer and helping us minimise the work involved in moving. Apologies in advance if you find any offering out of stock. It will be back in stock on 3/30/2015 at the normal price.
Please do not hesitate to contact us for any reason.
Just in case anyone here needs some, I got this email today and it is a good deal on PG and VG.Thank you for ordering your VG and PG from Essential Depot. We are moving our VG and PG production facilities and lab into a new 3.75 acre location on the 28th of March (in 7 days). In the meantime (while stocks last at current location) we are discounting all our VG and PG products accross the board by an additional 15% (this week only) to minimise the amount we have to transfer to the new facility.
You can review the crazy pricing for the next 7 days, on all our finest quality USP grade VG and PG offerings at:
VG Inventory - CLICK HERE
and
PG Inventory - CLICK HERE
Thank you consideration of this offer and helping us minimise the work involved in moving. Apologies in advance if you find any offering out of stock. It will be back in stock on 3/30/2015 at the normal price.
Please do not hesitate to contact us for any reason.
Last edited:
I got that too Goldie... I just bought a gallon of each two weeks ago 
Glad to see you conquered it Dee.
Glad to see you conquered it Dee.
Good morning young un's!
Hope everyone has a nice Sunday planned.
Still raining here, but its supposed to end this morning and no more rain until next Thursday. Maybe Wednesday the ground will be dry enough that I can start my mowing for the rest of the summer. Then the heat and humidity will come. There's only one good time to be in Yeast Texas .... and I'm not sure when that one time is ...........
Hope everyone has a nice Sunday planned.
Still raining here, but its supposed to end this morning and no more rain until next Thursday. Maybe Wednesday the ground will be dry enough that I can start my mowing for the rest of the summer. Then the heat and humidity will come. There's only one good time to be in Yeast Texas .... and I'm not sure when that one time is ...........
Thanks for the link Salem, I was in need of VG!!!! Great deal.
Woo hoo ElDee! Show that Goblin who's BOSS ! Haha
The kayfun v4 is a bust. We cannot get that thing to open. Period. Strength of many, male and female alike, rubber grippers, whacking it on a table (yup I was that pizzed) and even grabbing it with pliers over rubber grippers wouldn't budge that sucker! I'm over it and will call it a loss.
Laundry, cleaning and cooking will be what's on the agenda for today! Plthhhhh!~
Make it a great one!
Woo hoo ElDee! Show that Goblin who's BOSS ! Haha
The kayfun v4 is a bust. We cannot get that thing to open. Period. Strength of many, male and female alike, rubber grippers, whacking it on a table (yup I was that pizzed) and even grabbing it with pliers over rubber grippers wouldn't budge that sucker! I'm over it and will call it a loss.
Laundry, cleaning and cooking will be what's on the agenda for today! Plthhhhh!~
Make it a great one!
I got that too Goldie... I just bought a gallon of each two weeks ago
Glad to see you conquered it Dee.
That is normally how my luck goes. I am glad that I procrastinated on ordering this time.
Good morning, all.
Morning everyone
Dee I admire your determination! I woulda used that Goblin for target practice!
Great prices on the PG/VG, thanks for the link Salem.
Tracy can you trade your bum KF for one that will open? I had a habit of over tightening my Nauty and would have to wrap thick rubber bands around the bottom and top to get enough grip to open it.
Dee I admire your determination! I woulda used that Goblin for target practice!
Great prices on the PG/VG, thanks for the link Salem.
Tracy can you trade your bum KF for one that will open? I had a habit of over tightening my Nauty and would have to wrap thick rubber bands around the bottom and top to get enough grip to open it.
I agree. The nautilus will air lock if you let the tank run close to empty. Almost impossible to open it then.
Thanks for the link Salem, I was in need of VG!!!! Great deal.
Woo hoo ElDee! Show that Goblin who's BOSS ! Haha
The kayfun v4 is a bust. We cannot get that thing to open. Period. Strength of many, male and female alike, rubber grippers, whacking it on a table (yup I was that pizzed) and even grabbing it with pliers over rubber grippers wouldn't budge that sucker! I'm over it and will call it a loss.
Laundry, cleaning and cooking will be what's on the agenda for today! Plthhhhh!~
Make it a great one!
Hey Tracy!!
Try putting that bad boy Kayfun in the freezer for a while then try opening it.
At first, gently tap across the bottom edge like you would on a jar of pickles, then try your rubber bands or pliers.
I will try that TT!!! Thanks!
I also have to admit that I foolishly purchased it on impulse, and in an extreme hurry, and didn't realize it was dual coils. **hangs head** One coil is plenty to deal with IMHO. Lesson learned, read through emails and specs of a product before rushing to order. SMH
I also have to admit that I foolishly purchased it on impulse, and in an extreme hurry, and didn't realize it was dual coils. **hangs head** One coil is plenty to deal with IMHO. Lesson learned, read through emails and specs of a product before rushing to order. SMH
LOL, I don't know if that will work or not Tracy. Kinda depends on why its stuck. Might be bad threads or any number of things. Worth a try though.
A final thing to do right before the trash can comes to your mind is two pairs of pliers. One to grip the base with and maybe some channel locks to hold the upper part.
Remember ... righty tighty!!! So turn the base to the left.
The final thing to try is to give it to any 4 - 6 year old boy.
He should have it open within a few minutes.
He should have it open within a few minutes.
I use Playtex dish washing gloves. They are very thin yet very grippy. I have found if anything can get it apart, they can.
The Goblin......Dang screw for the fill port is jacked up....Get it out and filling is anything but a breeze...It's full now and may never be again......
That said....When I purchased the Goblin I was looking hard at the Lemo....Went with the Goblin due to the fact you had to remove the bottom from the Lemo to access the fill port...The Lemo is a single coil K Fun copied deck with adjustable airflow....supposedly great airflow....Yeah I ordering a black Lemo....made by E Leaf and 23 mm...Thinking it will fit the curve of the Stick 50 perfectly...A deck like that will allow me to throw in my tensioned coil without mucking with it much...It should Cadillac from there....
908.....Tell Bo an old bodyman from Dixie said....Don't let that stuck K Fun whoop that azz....and don't scratch it either....
That said....When I purchased the Goblin I was looking hard at the Lemo....Went with the Goblin due to the fact you had to remove the bottom from the Lemo to access the fill port...The Lemo is a single coil K Fun copied deck with adjustable airflow....supposedly great airflow....Yeah I ordering a black Lemo....made by E Leaf and 23 mm...Thinking it will fit the curve of the Stick 50 perfectly...A deck like that will allow me to throw in my tensioned coil without mucking with it much...It should Cadillac from there....
908.....Tell Bo an old bodyman from Dixie said....Don't let that stuck K Fun whoop that azz....and don't scratch it either....
- Status
