I'm one of those that run a single 1.2 ohm coil, single air hole open halfway, in the Nuppin and love it. Because the internal air chamber is relatively small this atty performs just as well with single coils as it does with duals.
Nuppin'
- Thread starter Spydro
- Start date
- th_trl_thread_readers 0
- Status
I'm one of those that run a single 1.2 ohm coil, single air hole open halfway, in the Nuppin and love it. Because the internal air chamber is relatively small this atty performs just as well with single coils as it does with duals.
I have not even tried it with dual coils, it is so good with a single coil. Running it at 0.7 ohms, slanted single coil, 2.5 mm ID with 26g Kanthal and 3 mm ReadyXwick - air slit 3/4 way open. Most accurate flavour ever for me.
Well, there you have it! No Nuppin' s left!
For those of you that missed out we can only blame ourselves. We all arm twisted a certain movie star that was dead set against trying the little gem. Gave him grief about not be adventurous and treading outside the box etc. Sooooo, the movie star breaks down to pressure, tries it, and likes it!! Tells the world, (as we all know his words are like Moses from the mountain top) and now the Nuppin' is a Unicorn!!
It must be scary to have that much power.LOL
Glad I made it back from hunting in time to order #4, #5, #6. I knew when I left that it was only a matter of time before SxD gave them two thumbs up that they would disappear.
Spot on as usual FB. My single coil Nuppin has seen 90% of the work since building it on the 24th. I just keep refilling the bottle while the others sit there full and stand guard. What a versatile amazing atty.
Well, there you have it! No Nuppin' s left!
For those of you that missed out we can only blame ourselves. We all arm twisted a certain movie star that was dead set against trying the little gem. Gave him grief about not be adventurous and treading outside the box etc. Sooooo, the movie star breaks down to pressure, tries it, and likes it!! Tells the world, (as we all know his words are like Moses from the mountain top) and now the Nuppin' is a Unicorn!!
It must be scary to have that much power.
Rudy, what tickles me is that I got one before the movie star. First time that has ever happened!!
I have 3 mods and only one with a nuppin and I just keep reaching for like, nuppin. The other two are full of juice too. I just keep refilling like, nuppin.
I'm glad there are more nuppins scheduled to arrive tomorrow
In all fairness to this little beast of an atty, like 270 or something of them sold with zero help from me
Like I said, I was set on attys. But it has become painfully obvious that I am just as vulnerable as the rest of you when it comes to atty temptation and I ultimately succumbed under the relentless prodding and hearing nothing but excellent reviews by my peers. Ya'll are what sold this atty and have yourselves to thank / blame.
Thank you for the recommendations and harangging. I am a very happy camper at the moment.
Next stop: _X_proof 510 connectors. It's gonna be another great year in REOvil
I'm glad there are more nuppins scheduled to arrive tomorrow
In all fairness to this little beast of an atty, like 270 or something of them sold with zero help from me
Like I said, I was set on attys. But it has become painfully obvious that I am just as vulnerable as the rest of you when it comes to atty temptation and I ultimately succumbed under the relentless prodding and hearing nothing but excellent reviews by my peers. Ya'll are what sold this atty and have yourselves to thank / blame.
Thank you for the recommendations and harangging. I am a very happy camper at the moment.
Next stop: _X_proof 510 connectors. It's gonna be another great year in REOvil
I have 3 mods and only one with a nuppin and I just keep reaching for like, nuppin. The other two are full of juice too. I just keep refilling like, nuppin.
I'm glad there are more nuppins scheduled to arrive tomorrow
In all fairness to this little beast of an atty, like 270 or something of them sold with zero help from me
Like I said, I was set on attys. But it has become painfully obvious that I am just as vulnerable as the rest of you when it comes to atty temptation and I ultimately succumbed under the relentless prodding and hearing nothing but excellent reviews by my peers. Ya'll are what sold this atty and have yourselves to thank / blame.
Thank you for the recommendations and harangging. I am a very happy camper at the moment.
Next stop: _X_proof 510 connectors. It's gonna be another great year in REOvil
You got that right!
It's nice to know us old dogs can enjoy new tricks.
2015 going to be a great year, new 510s, mechanical Woodvil run and new Resin models!! The hits just keep on comin'!
I run both a single w/RxW and dual w/KGD in my first two that are used all day and night every day and night equally. Nuppin' 3 will get a dual RxW when I have something to run another one on (unfortunately only 2 of my 9 Reos are LP). If I had more LP's, didn't already have 20+ bf atty's for the Reos, I would have bought way more than just 3 Nuppin's though. They are my bf atty of choice now.
You got that right!
It's nice to know us old dogs can enjoy new tricks.
2015 going to be a great year, new 510s, mechanical Woodvil run and new Resin models!! The hits just keep on comin'!
Has anyone heard anything about a burl with holes, speaking of models!!
Well, there you have it! No Nuppin' s left!
For those of you that missed out we can only blame ourselves. We all arm twisted a certain movie star that was dead set against trying the little gem. Gave him grief about not be adventurous and treading outside the box etc. Sooooo, the movie star breaks down to pressure, tries it, and likes it!! Tells the world, (as we all know his words are like Moses from the mountain top) and now the Nuppin' is a Unicorn!!
It must be scary to have that much power.
Actually they were already almost all gone before that arm was finally twisted far enough to get on board, but it was fun AND we got a video out of it as a bonus.
Have all the blocks of this burl with holes from Tasmania that was ever found. Does that count?
SuperX, once you bought one and posted the video I bought one. It arrived today and I will put a coil on it for New Years. So you sold me on the Odin and now the Nuppin. I was hoping they would sell out before I had to buy one. The bonus is I was able to support a fellow Washingtonian. I do like everything about the Nuppin so far.
Managed to install dual coils on the Nuppin' earlier today. I used one longer wick for both coils, as shown by superX in his video.
Dual coil taste is even better than single coil, which I regarded best of all my atties.
Only thing to get accustomed to is the amount and thickness of vape, that currently fogs up my computer screen.
Imho the Nuppin' definitely beats the Odin as a direct lung hitter.
As single coiler with reduced air flow, I can even mouth-to-lung with a taste at RM2 level.
The Nuppin' is my most versatile atomizer.
Dual coil taste is even better than single coil, which I regarded best of all my atties.
Only thing to get accustomed to is the amount and thickness of vape, that currently fogs up my computer screen.
Imho the Nuppin' definitely beats the Odin as a direct lung hitter.
As single coiler with reduced air flow, I can even mouth-to-lung with a taste at RM2 level.
The Nuppin' is my most versatile atomizer.
I just got my Nuppin today. Built 'er, metered 'er at .7 with dual coils, mounted 'er, and...nothing. Won't fire on my Grand. It's a regular old model that I sent in to Rob to get LPified. I can get it to fire if I loosen up the 510 on the Grand, but I'm not really comfortable keeping it like that. Am I doing something wrong, or is the mod just not milled down quite enough?
The nuppins 510 is adjustable...I haven't done it but I heard it's pretty tuff ... Use a good fitting straight head screwdriver and a piece of leather or rubberband around the atty for grip... Maybe someone else can chime in...
Has happened to a few. Mine only fires on one of four reos. As stated above some adjust the attie screw
Sent from my GT-I9506 using Tapatalk
- Status
