Similar thing happened to me, had a couple dry hits chain vaping and trimmed the wick a bit and has been just fine ever since. I did adjust the coil just a bit as well, been wicking like a champ since.
Different clone maker? The new posted have different packaging. The new ones posted only have colored glass, no clear and the included parts are different. The new ones have spare o-rings and screws, but no spare glass, the first one posted has spare glass, but no spare rings and screws. Of course, no black tank yet either.
Ya I noticed there was no extra glass so was thinking that's why it's a little cheaper but idk....Different clone maker? The new posted have different packaging. The new ones posted only have colored glass, no clear and the included parts are different. The new ones have spare o-rings and screws, but no spare glass, the first one posted has spare glass, but no spare rings and screws. Of course, no black tank yet either.
Very eager to see some reviews on these clones.
i used a rubber glove. placed my rubber gloved right hand index finger in the glass tube and thumb pushing, while twisting with the bare left hand fingers and unscrewed. i hope that helps.
Check earlier pages, think someone said it worked great to run it under some warm water and twist. Some latex gloves might help as well
B&M, someone there might bite. Otherwise ECF classies or ebay I would say.
You know all those really popular heavy rubber wrist bands you can get supporting all sorts of things.. well THOSE work great for taking tanks apart... I have one at my office and one at home.. just for tanks.... gives just enough grip without having to worry about breaking the glass or damaging threads.. Just a suggestion... Also once I do get any tank apart.. I just use finger pressure when putting them back together... very rarely do I need to use the rubber band more than a couple times... but it really does work and wont scratch or damage anything.
Well just an update... I LOVE IT... been using it every day.. had the slight juice leak around the black bottom section.. raised the coils just a bit and put a wee bit more cotton than normal thru the coils and into those wicking holes and bam no more problems. I did two coils.. both are on 3mm jig 26ga kanthal... 7 wraps.. comes in just under .5 ohms and this thing vapes like a champ at 27 watts and gives total awesome flavor. I was getting some semi dry... slightly burnt type hits.. so took it apart.. removed the wicks.. I use cotton bacon... put a little bit more than I thought I should use... trimmed the ends so they went into the drip holes and poof.. pure vaping pleasure. ALSO.. .mind to keep the cotton flush with the outside of the holes when assembling... if you have a bunch sticking out.. when you turn the tank to shut off the flow.. the outer area will pull little bits of cotton out the hole and actually trim it off... doesn't really hurt anything but you end up with little white tufts of cotton floating in your tank.
