OFFICIAL: CyrstalClearVaping Information Thread..

[Led Hendriani]

Just want to say that I am VERY HAPPY with my dual punched cartos! It's what I was hoping for: it has been almost a week and my first one is still going strong!!!

... I wonder if the eGo cone I was using was shortening the life of the Resurrectors by warming them up too much?

 

[Dirtay J]

according to the tracking it looks like my Zmax should be here tomorrow! USPS has really stepped up their game if it does show up tomorrow being that I ordered it friday night and got shipped Saturday. Also my order from the day before with a whole lot of Boge cartos should be here tomorrow too. I can't wait!!

 

[RobynS]

If it is an E-Power your referring to then pull the spring from bottom stretch it about an 1 inch, they were designed with icr 14650 are tad longer them imr's

Andrew - thanks for the advice - works great. I was just wondering - what is the difference between ICR and IMRs? Are the IMRs suppose to be better, last longer?

 

[Skeetergirl]

Andrew, do the inner O rings that you sale on your site solve the "OMG I lost another tank of juice" with the 3.5 ml tanks you sell on your site or is it just something that will always happen so I should just only use them at home? LOL

 

[cmdryker]

Just want to say that I am VERY HAPPY with my dual punched cartos! It's what I was hoping for: it has been almost a week and my first one is still going strong!!!

... I wonder if the eGo cone I was using was shortening the life of the Resurrectors by warming them up too much?

I have notice this also with doubles they last longer the air flow is smooth and consistent, not more quick pulls from time to time without switch on to get a few bubbles

 

[cmdryker]

Andrew, do the inner O rings that you sale on your site solve the "OMG I lost another tank of juice" with the 3.5 ml tanks you sell on your site or is it just something that will always happen so I should just only use them at home? LOL

They are the same exact ones that come in the tanks,,,just like my drip tip o rings are same ones they put on them at the factory.

 

[cmdryker]

Andrew - thanks for the advice - works great. I was just wondering - what is the difference between ICR and IMRs? Are the IMRs suppose to be better, last longer?

IMR are considered safe chemistry battery , not to vent with flame if it were to ever happen, plus they deliver a more consistent power across the charge cycle, will eventually only be caring IMR for this reason, (except for battery's that come per-packaged in kits)

 

[Dirtay J]

Got my Zmax today. All I can say is WOW. I really thought it was going to be basically a Vmax that has the option to do VW and VV. I dont know what it is, but it just seems way better. Set my Vmax to 5volts with a 3ohm single cart and the Zmax at 5volts with the same cart and the flavor, throat hit and vapor was better. I don't have any of the fancy meters or anything to check voltage but all I know is I am in love!!!!! I was unsure how I was going to feel about the red display because I love the blue, but I also love the red display. Especially because it it a real easy way to tell my Zmax apart from my Vmax. Either way I am really happy!!!!

 

[Dirtay J]

ok I have had 1 issue with my Zmax. I have a Panny CGR18650CH, not from CCV but it is a legit Panasonic CGR18650CH. I can not get it to fit in the battery cap. The battery is just a real little bit to wide to fit in the cap. I bought this battery at a local brick and mortar vape shop in anticipation for my Zmax. Any tips? I don't want to force it in and possibly cause major issues. I plan to open up the inside of the 18650 cap just a little bit to make it fit, but I was just wondering if there was any tips to make it fit, being that I now see you include this same battery with the regular version of the Zmax.

thanks

 

[jackbox]

ok I have had 1 issue with my Zmax. I have a Panny CGR18650CH, not from CCV but it is a legit Panasonic CGR18650CH. I can not get it to fit in the battery cap. The battery is just a real little bit to wide to fit in the cap. I bought this battery at a local brick and mortar vape shop in anticipation for my Zmax. Any tips? I don't want to force it in and possibly cause major issues. I plan to open up the inside of the 18650 cap just a little bit to make it fit, but I was just wondering if there was any tips to make it fit, being that I now see you include this same battery with the regular version of the Zmax.

thanks

Some batteries are double wrapped. It makes them too thick to fit into a lot of mods. VMax had a similar issue.

 

[Led Hendriani]

OOH! I wonder what is on the inner wrapping of a new pany?

 

[Boognish]

Hey Andrew.....Any chance of carrying a 2.5 ohm carto in the future? Thanks.

 

[cmdryker]

Blue display ZMAX'S will be here tomorrow or Friday, in Chrome and SS, also a few red displays left. As for 2.5ohm cartos, blk or SS or prepunched, reg or XL

 

[ReflectedLight]

Commander - is there a black ZMax in the future or are shiny and really shiny going to be the only choices?

 

[cmdryker]

Commander - is there a black ZMax in the future or are shiny and really shiny going to be the only choices?

Sure there will be,,also going to put same Zmax electronics in a gripper style to be released sometime before Christmas.

 

[Boognish]

Blue display ZMAX'S will be here tomorrow or Friday, in Chrome and SS, also a few red displays left. As for 2.5ohm cartos, blk or SS or prepunched, reg or XL

SS reg. and xl 2.5 cartos for my tanks. I notch my own. Also a slim tank option without cartos at a lesser price would be great. I'm also waiting for a black Zmax and possibly a gripper style if they make a few improvements. (Battery door, less clicky button maybe)

 

[Kemosabe]

How is quality control on Ressurectors these days? There were some bad ones going around in recent months. Burnt flavor, stiff draw, etc. I need to order more but am a bit leery. Any insight would be appreciated.

my resurrectors have been top notch as of late. my last few 3-box deals have had zero duds. one clear one was a bit wacky but it still hit like a champ.

 

[cmdryker]

Not going to advertize it but if you need a syringe and needle to fill just ask in comments Dr. Fillgood......... lol dripping and condom filling just doesn't cut it, if get an air bubble in an around the coil, you let it sit and soak for 20 years still going to be burnt, syringe filling from bottom up eliminates this, Like the guy put 15 drops in 3 jumbo's (5 drop per carto, that hold nearly 100 drops) gave a negative review saying stay away from these things, think this dudes real problem has been he's been following the shade around the house for to long.

 

[oplholik]

Andrew, are you going to be getting any Efest IMR 14500's?

 

[cmdryker]

Andrew, are you going to be getting any Efest IMR 14500's?

Just got bunch in for fellow vendor but I do have a 2 pack of Efest 14500 nipple top unopened sell ya if you want them, 12.00 if want them use this link for the 12 dollars type in text box what it is for:


Crystal Clear Vaping