OFFICIAL: CyrstalClearVaping Information Thread..

[cmdryker]

And as a huge fan of the resurrectors, I can say that I'm super excited to try out the large capacity ones! lol For once I don't have an order pending, but I'll definitely try to grab some next time I order. Wait a sec... I'm not finding them on the site. Are they listed yet, or just as samples?

BTW, I've just gotten some very high voltage devices. Someone told me that smoktech makes a single coil higher ohm carto... any chance that you'll carry those anytime soon? And thanks SO much for carrying the XL boges! Those have been SO hard to find up till now, and I really love those for higher voltages.

Got both 2ohm and 3ohm boge XL's on the way, as for XXL resurrectors, everyone seems to love them,but dam tip falls off if you look at it the wrong way, further research revealed it is same size as an 801 carto, get 801 tips in, then i start selling them, include an 801 tip with each box,but if you want to try one in the meantime just send a pm or email.

 

[sandscards]

I am also waiting on the 3 ohm Boge XL to try in my dual coil tanks. Currently using the SmokTech dual coils but have a vv device and would like to try a single coil higher ohm in there. I don't believe I have seen them punched so I guess I need to start arranging for a punch so I can use them.

 

[VapingTurtle]

Got both 2ohm and 3ohm boge XL's on the way, as for XXL resurrectors, everyone seems to love them,but dam tip falls off if you look at it the wrong way, further research revealed it is same size as an 801 carto, get 801 tips in, then i start selling them, include an 801 tip with each box,but if you want to try one in the meantime just send a pm or email.

Next step is to get Boge to make pre-punched (and maybe flanged) tank replacement cartos like the STs.

 

[sandscards]

I would buy the Boge pre-punched cartos in a length to work in the dual coil tanks. A flange would be an even bigger bonus to have. Might sell a lot more tanks also. I would also try a Smok Tech single coil that is flanged and punched in the higher ohms. I saw also that they are making them and hoping CCV gets them in. The tough decision would then be which one to roll with. I haven't had any problems with the Smok Techs.

 

[VapingTurtle]

I would buy the Boge pre-punched cartos in a length to work in the dual coil tanks. A flange would be an even bigger bonus to have. Might sell a lot more tanks also. I would also try a Smok Tech single coil that is flanged and punched in the higher ohms. I saw also that they are making them and hoping CCV gets them in. The tough decision would then be which one to roll with. I haven't had any problems with the Smok Techs.

I have been using the ST SC 3.0 in a DCT at 5v for a couple of weeks. It's the first carto that I really like at 5v. But in general, I prefer Boges.

Punching is easy to do, but not as consistent as the pre-punched.

 

[Bogey]

Just tried my first resurrector jr. Awesome on the Reo woodvil 18490. Thanks Andrew.

 

[sandscards]

Next step is to get Boge to make pre-punched (and maybe flanged) tank replacement cartos like the STs.

I was just thinking that pre-punched Boge's could be a problem in that every tank might need to be punched at a different height. I haven't experimented with many different brand tanks but looks like there would be some variation so that it isn't universal. I use mostly cheap dual coil tanks. I haven't figured out the science to tanks yet or even if there is one. Other than appearance and capacity it seems most do the same thing. They hold the liquid in and don't leak. I have wondered about the vacuum and air pressure questions and if the tank designers have to take that into consideration. Anyway, punching as a manufacturer or retailer may be a little more complicated than I originally thought.

 

[B2L]

Just wanted to write a quick note after reading through some of this thread. I came across CCV from a review by PBusardo and ordered some resurrectors and a bolt pv. This was in early January when Andrew was having some shipping issues, primarily from having a rapidly expanding business. I was disappointed in the long wait but I have to say every email to them was answered in a very timely fashion and Andrew did everything he could to make up for the wait. I have since placed several orders with them and will continue to do so because I have every indication that Andrew and Jimmie really care and want to provide us with great products at great prices. BTW, the shipping is not free... they pay for it as a form of customer service which, IMO, is above and beyond. As far as bad resurrectors, I have had one out of the 45 I have ordered due to my impatience.

 

[MXBNW]

Dose the RESURRECTOR JR only come in the SS?

I need to place a bulk order soon and would love to try a batch of these but would love them in Black,

 

[sportyfortyeight]

Just an update on my xxl.. its still up and going. Taste is a little weaker then brand new but that's common with cartos with my daily juice. Wish I had an 801 tip now that its know to fit em but my "rigged" 501 and a huge o ring is working. Andrew thank and hope other are finding them to work as good as I do.

 

[sandscards]

Wow, you fall to page four in this forum fast!

 

[cmdryker]

Dose the RESURRECTOR JR only come in the SS?

I need to place a bulk order soon and would love to try a batch of these but would love them in Black,

Yes, SS is only option for the Jr's at the moment.

 

[MXBNW]

Thanks, I will pick up a box for now and check them out. Hearing good things about the carto.

Order coming through soon.

Thanks

Yes, SS is only option for the Jr's at the moment.

 

[KeysBum]

Andrew. Will you be selling the new Smok VMax mod?

 

[cmdryker]

Andrew. Will you be selling the new Smok VMax mod?

Jeremy an I tested the prototype a month ago very impressed, there sending 2 of the samples of finals, be here Monday, But yes I'm sure I will, also just got the V1.5 of the lava-tube in with 3.2 amp button unlike the original lavatube had 2.5 amp switch an would not let a dual coil vape past 3.3 volts that in my opinion is a useless device, Just waiting for my IMR battery's to get here so add that as an option when ordering the kits, both silver or blk

 

[VapingTurtle]

Always good to see you expanding your offerings, Andrew.

 

[johnsnhu]

Any idea on when the Boge XL 3 ohm cartos will be back in stock?

Sent from my Galaxy Nexus using Tapatalk 2

 

[cmdryker]

Any idea on when the Boge XL 3 ohm cartos will be back in stock?

Sent from my Galaxy Nexus using Tapatalk 2

order been in for over a week now so any day now get the word they shipped. thats what takes so long them building order for 30k cartos at a time.

 

[sandscards]

Andrew, you have a new customer coming your way. I just liked the way you handled a bump in the road a week or two ago and your responses to customers. I too am waiting on the Boge XL 3.0 but also saw Smoktech has a 3.0 single coil that in flanged and punched. Do you have a recomendation as to which way to go. I havne't had any problems with the Smoktech dual coil and 1.7 single coil but just thought I might try the Boge to see what everyone is talking about. If the Smoktech is flanged and punched it might be simpler than having to punch the Boge, unless punched Boge will be available.

 

[johnsnhu]

order been in for over a week now so any day now get the word they shipped. thats what takes so long them building order for 30k cartos at a time.

Thanks for the quick reply! Can't wait to order some up!

Sent from my Galaxy Nexus using Tapatalk 2