Official DiscountVapers.com Thread

[gormly]

No I hadn't, thank you. I wonder who makes that CE4 knockoff

They are not Go-go tanks btw... it is not a 3.0ohm rated Go-go cartomizer with fill inside. It's a CE4 with 808D-3 threading.

While it's cool for sure, a CE4 with Go-go threading is just a tad more convenient than using an adapter on a gogo but it's also priced at $7.33 each, instead of $4.99 like it should be. Worth it? To me, no, not in my opinion.

If I find out who manufactures them, I'll pick some up and sell it for the right price.

 

[txtumbleweed]

I would prefer to have them with a Go-Go connection too. I use them with an adapter now but would look much better and be more comfortable with a D-3 connection. They will also hold more juice than the ego type.

I also prefer the flat tip for my ce-4's if you can get some tips it would be great.

 

[gormly]

I would prefer to have them with a Go-Go connection too. I use them with an adapter now but would look much better and be more comfortable with a D-3 connection. They will also hold more juice than the ego type.

I also prefer the flat tip for my ce-4's if you can get some tips it would be great.

I don't disagree, just do not think it's worth the extra cost.

from the picture the marking goes up to 1.6ml, which is the same as the original CE4.
I'm working on the flat tips

 

[txtumbleweed]

I don't disagree, just do not think it's worth the extra cost.

from the picture the marking goes up to 1.6ml, which is the same as the original CE4.
I'm working on the flat tips

They will hold more just like the 808 ce4's do because the ego has the recessed connection for the skirt so all that space will hold more juice. They will hold about 1/2 ml more.

 

[gormly]

They will hold more just like the 808 ce4's do because the ego has the recessed connection for the skirt so all that space will hold more juice. They will hold about 1/2 ml more.

if that's the case then the markings are wrong LOL. (wouldn't surprise me)
If anyone find out who makes em let me know, I'll sell them a LOT cheaper.

 

[txtumbleweed]

if that's the case then the markings are wrong LOL. (wouldn't surprise me)
If anyone find out who makes em let me know, I'll sell them a LOT cheaper.

Yeah it is the markings on the tank. They are all marked the same if you look closely at the ego ce4 it will have the first .2 ml mark before there is any juice. I have both 808 ce4's and ego ce4's and the 808's definately hold more.

 

[bobalex]

While it's cool for sure, a CE4 with Go-go threading is just a tad more convenient than using an adapter on a gogo but it's also priced at $7.33 each, instead of $4.99 like it should be.

They're selling for $17.95 for 3 or ... $ 5.983333333333333 apiece. Not $7.33. And worth it because I don't have an adapter. I'm just glad It was designed for my go-go!

 

[gormly]

They're selling for $17.95 for 3 or ... $ 5.983333333333333 apiece. Not $7.33. And worth it because I don't have an adapter. I'm just glad It was designed for my go-go!

It was 21.99 with no sale the other day, at least from what I saw, glad it's lower. Maybe it was a glitch?

Also, please excuse me for having a slight bug up my ... I get kind of righteous when things are not listed properly, at least in my view (which admittedly can be warped) to me, this is a CE4 short wick with a 808D-3 thread, not a Go-go Tank. Chopper came up with and makes a proper Go-go tank, with a Go-go cartomizer in it. Which is what a Go-go tank should be.

That and now the price, a new product listed for xx amount, "on sale" for xx and "you save" xx bugs me. I have looked, no one else that I can see sells it, so unless it was 21.99 at one point (for a while, not one day) listing it as on sale for less is not only wrong it's illegal. (not the sale part but suggesting it was once full price) It's part of the Consumer Protection Laws (ftc.gov) and all vendors should heed and adhere to the rules.

A lot of ecig vendors do this, all the items on their site are "on sale", to me, that's a red flag, a sales gimmick. Maybe that's yet another reason I am not so big? LOL

Note: I am NOT saying anyone did anything illegal, because I just saw this product, it could have been out for months, and my little rant doesn't take anything away from this product, I am sure it's awesome, I am certainly not trying to derail it, because I'd like to get some for myself and you guys but that's how I see it, I am stickler for telling it like it is and my poor writing style sometimes make it seem as I am being hostile when I'm not

and I'll still sell it cheaper if I can just find it LOL

 

[sonicdsl]

It was 21.99 with no sale the other day, at least from what I saw, glad it's lower. Maybe it was a glitch?

Also, please excuse me for having a slight bug up my ... I get kind of righteous when things are not listed properly, at least in my view (which admittedly can be warped) to me, this is a CE4 short wick with a 808D-3 thread, not a Go-go Tank. Chopper came up with and makes a proper Go-go tank, with a Go-go cartomizer in it. Which is what a Go-go tank should be.

That and now the price, a new product listed for xx amount, "on sale" for xx and "you save" xx bugs me. I have looked, no one else that I can see sells it, so unless it was 21.99 at one point (for a while, not one day) listing it as on sale for less is not only wrong it's illegal. (not the sale part but suggesting it was once full price) It's part of the Consumer Protection Laws (ftc.gov) and all vendors should heed and adhere to the rules.

A lot of ecig vendors do this, all the items on their site are "on sale", to me, that's a red flag, a sales gimmick. Maybe that's yet another reason I am not so big? LOL

Note: I am NOT saying anyone did anything illegal, because I just saw this product, it could have been out for months, and my little rant doesn't take anything away from this product, I am sure it's awesome, I am certainly not trying to derail it, because I'd like to get some for myself and you guys but that's how I see it, I am stickler for telling it like it is and my poor writing style sometimes make it seem as I am being hostile when I'm not

and I'll still sell it cheaper if I can just find it LOL

I too have noticed the "sale" thing since about my second month of vaping, wondering why so much seems always on sale. I just started to accept it as the nature of this business, and started focusing on who had the best prices and service.

That's why I'm here. If I wasn't unemployed atm, I'd still be buying all the latest to try too. I have to be a little more selective now though.

 

[Krispers]

I too have noticed the "sale" thing since about my second month of vaping, wondering why so much seems always on sale. I just started to accept it as the nature of this business, and started focusing on who had the best prices and service.

That's why I'm here. If I wasn't unemployed atm, I'd still be buying all the latest to try too. I have to be a little more selective now though.

let the stalking begin!!!!!!!

 

[bobalex]

… this is a CE4 short wick with a 808D-3 thread, not a Go-go Tank. Chopper came up with and makes a proper Go-go tank, with a Go-go cartomizer in it. Which is what a Go-go tank should be ...

Well if you insist it’s not a proper Go-go tank because it doesn’t have a Go-go cartomizer inside it … what can I say?

There have been a number of different devices made that hold a ml or more of e-liquid and use wicks instead of filler material. They have been called by manufacturers, vendors, and vapers: clearomizers, tankomizers, or tanks.

For example:

Ce4 Tank-Ce4 Tank Manufacturers, Suppliers and Exporters on Alibaba.com

When the eGo T came out they called that little bitty 1ml thingy a tank.

All I’ve been waiting for was a tank, minus filler material or interior carto, that fit (without an adapter) on my fave 1300 mAh Go-go battery.

And it’s finally here.

It looks like a tank
It vapes like a tank
It fits on a Go-go battery

So it’s a … duck.

A.K.A. a Go-go tank.

 

[gormly]

So it’s a … duck.

A.K.A. a Go-go tank.

Bob I am curious, is it your intent to start trouble here? I can remember the LCD issue quite well.
If it is, please don't, I am asking you politely.

This is my forum, I pay for it, and it represents my business. I take a lot of time to make sure everything is run correctly and more importantly everything that is posted here in this ecf sub forum is accurately represented as I see it, not how you see it, how I see it . I may be incorrect in my assessments from time to time, but that is my prerogative.

In my opinion, it's not a Go-go tank, it's a tank like clearo that fits on a Go-go. I didn't say it can't be called a Go-go tank, just making sure the differences are pointed out. The Go-go has two carto's, the standard 3.0 ohm polyfill and the dual coil polyfill, they both are basically the same. This item is completely different. As a fan of the Go-go you know this. You also know about the original Go-go tank.

In my opinion, there is ONE Go-go tank, Chopper made it. Now there are two called "Go-go Tank" that's a bit confusing and someone could conceivably believe that the products are the same when they are not..

This is the Go-go tank:
Go-go Tank
It was made 6+ moths ago.

This new one is a CE4 with a 808D-3 threading for sure a GREAT ADDITION and I am glad it's out there.

That is... end of story, on this thread at least, feel free to disagree with me in a different sub forum.

 

[bobalex]

Not trying to stir up anything. Just getting the lay of the land here. I'll be on my way.

 

[sandybeach]

Hey Bob, Can you please go a little easy? Eric really just wants to help. Eric is one of the coolest vendors I know. If you have a problem with something, he replaces it, no questions asked.
Sandy

p.s. Boys, don't make me come in there

 

[madmach]

I think i will hold off for now i do not think it will taste the same as a go cart that has the coil at the bottom as to the ce4 coil looks to be on top.

 

[orachel]

Eric, you rock for putting such honest reviews in. It makes you very trustworthy! Thank you.

+1 on that! I can't thank you enough for your straight shooting assessment of these things. I know how much fiddling and troubleshooting I'm likely to put up with, so what might be perfect for someone techier, isn't so much for me. Plus I refer a bunch of products to newish vapers, and I HATE to send them down the wrong path. I'm really excited about the rebuildable ce5s, personally.

btw, Bobalex, your 'So, its a duck.' post cracked me right the heck up. lol Thanks for the chuckle! Rutrow... but I didn't read the previous posts and didn't realize that was a negative thing. This is one vendor you'll never hear me saying a negative word about cause he's honest, listens to his clients opinions, and charges fair prices. You're entitled to your own opinion, but do try to remember that the vendors buy things just like we do... based on what they're reported to do and be by the manufacturer. They may not always be 100% accurate, but its what the vendors were promised when they purchased the items in question. Vendors don't have a crystal ball leading them to the 'perfect vape' products any more than we do. And they're out a lot more money when something doesn't perform as advertised. Unfortunately.

 

[orachel]

Ok, I am SUPER excited! I just saw you're getting the new Ovale vv... and its incremental from 3-6v! And shiny! And digital display! rofl I'm like you... I have a stainless lava tube, vision tox, 3.7v wood mod, ego passthrough.. I still keep finding myself grabbing for the Ovale! Its definitely become my fave. Something about the comfy feel in hand, and the vape is way stronger, more intense, than any other pv i have, even w same voltage, and w same carto. The only negatives about the old ones (version I have) is that it only does 3 voltages, and occasionally my firing button gets stuck on, but thank goodness its not actually firing when that happens, and its easily fixed. But you mentioned that this one hopefully doesn't do that, so I'm thrilled. Just emailed 2 vapers I know who are looking for inexpensive vv with stats and links, and posted a thing about in my noobie thread, cause a few of them got a lava mini, didn't realize how long an 18350 lasted, and are wanting something that lasts longer. And ovale takes 2 of those, so thing lasts ages. I promise I'm gonna snaggle one myself, just as soon as I can. And seriously? $30? lol Officially the steal of the decade.

I have a little favor to ask... do you think, if I could prove to you with very well regarded reviews showing stats that the WP2 II charger will charge anything under 70mm that you might be able to put that in the description? I personally use it for 14500s, 18350s, 18500s, and 18650s, but I read in 2 candlepower reviews and saw on one youtube review that it can charge any rechargeable under 70mm. Reason I ask is cause that's the charger I'm recommending to all the newbies, and a few of them have come over here to get it, seen that it doesn't list 18350s, and then I have to go thru the whole spiel with em all over again. rofl Plus, I think that makes it a much more desirable charger, since it'll basically do any mod battery. Well, not ANY mod battery. I know a guy with a mod charged by a 12v car battery... no lie. rofl It won't charge that one.

 

[gormly]

Ok, I am SUPER excited! I just saw you're getting the new Ovale vv... and its incremental from 3-6v! And shiny! And digital display! rofl I'm like you... I have a stainless lava tube, vision tox, 3.7v wood mod, ego passthrough.. I still keep finding myself grabbing for the Ovale! Its definitely become my fave. Something about the comfy feel in hand, and the vape is way stronger, more intense, than any other pv i have, even w same voltage, and w same carto. The only negatives about the old ones (version I have) is that it only does 3 voltages, and occasionally my firing button gets stuck on, but thank goodness its not actually firing when that happens, and its easily fixed. But you mentioned that this one hopefully doesn't do that, so I'm thrilled. Just emailed 2 vapers I know who are looking for inexpensive vv with stats and links, and posted a thing about in my noobie thread, cause a few of them got a lava mini, didn't realize how long an 18350 lasted, and are wanting something that lasts longer. And ovale takes 2 of those, so thing lasts ages. I promise I'm gonna snaggle one myself, just as soon as I can. And seriously? $30? lol Officially the steal of the decade.

I have a little favor to ask... do you think, if I could prove to you with very well regarded reviews showing stats that the WP2 II charger will charge anything under 70mm that you might be able to put that in the description? I personally use it for 14500s, 18350s, 18500s, and 18650s, but I read in 2 candlepower reviews and saw on one youtube review that it can charge any rechargeable under 70mm. Reason I ask is cause that's the charger I'm recommending to all the newbies, and a few of them have come over here to get it, seen that it doesn't list 18350s, and then I have to go thru the whole spiel with em all over again. rofl Plus, I think that makes it a much more desirable charger, since it'll basically do any mod battery. Well, not ANY mod battery. I know a guy with a mod charged by a 12v car battery... no lie. rofl It won't charge that one.

LOL sure I'll put it in there, I haven't tried it, does it just need the spacer?


My perfect vape would be ovale power automatic with a tube a drip tip on the end plugged into the wall so I wouldn't have to stop typing while vaping


and yea, I might have priced that Ovale too low LOL

 

[orachel]

Um.... lets see... going over there to check it out since its so automatic for me at this point. lol

14500 no
18350 requires 2 spacers per battery... so you need extra spacers. Just had a girl I sent over today buy your charger, and then I realized she was only charging 18350s, so she needed extra spacers. I found em for her at 45c each, though, but the shipping was another $2.50 or something. But that would be a KILLER item to stock, indiv spacers
18500 no
18650 no

So of all the ones I've personally done on it, only one of them requires spacers at all, but it requires two stacked. And again, I didn't just get experimental. lol I found about 4 killer reviews on that charger, and one of em had a chart of what you could charge, and what it required, spacerwise, for each. That one, and two others (and these are serious hobbyists... review had like 15 charts in it, most of which were greek to me. lol) all concluded that the packaging on the charger was misleading. It effectively and safely charges ANY rechargeable batt under 70mm in length. Good news, no? lol And just remembered... I posted a link to that review with all the charts in here, right when I posted the link with the video review of it. Gosh, I have NO idea how long ago that was though. But its in here somewhere. lol

And hells yeah! loving the concept! Hire an engineer! lol I love the idea of not having to stop typing to vape. Meanwhile, humans used to hunt and skin their food, and build their own homes. Geesh. We're ridiculous. rofl

BTW, totally random... but does anyone here know of anyone who builds mods? I just got gifted an AMAZING cigar tin,tiny bit narrower than an altoids box, and also about 1 and 2/3s altoids tins in length. Dying to find someone who will charge reasonable cost to turn it into a vv or a bottom feeder, since I can just flip open the top to squonk a little bottle. Prob even room in there to store an extra bottle of juice and a spare batt. lol Its SO darn cool. Gorgeous vintage cigar box graphic.

AND found something else I want to pm you about also, Eric. Probably later today. Could be a VERY cool concept, but will require somebody who can mod. And cheap... cheap as can be.

and yeah, its priced low, but don't go getting any ideas! lol I just posted about it in about 4 different threads, and listed the current price and link. lol

 

[IronAP]

BTW, totally random... but does anyone here know of anyone who builds mods? I just got gifted an AMAZING cigar tin,tiny bit narrower than an altoids box, and also about 1 and 2/3s altoids tins in length. Dying to find someone who will charge reasonable cost to turn it into a vv or a bottom feeder, since I can just flip open the top to squonk a little bottle. Prob even room in there to store an extra bottle of juice and a spare batt. lol Its SO darn cool. Gorgeous vintage cigar box graphic.

Got any pics of the box? Maybe I can help you out.