Official DiscountVapers.com Thread

[KalebK]

I am so beyond frustrated with mine that I got from Got Vapes, the bottom coils!!! I dunno what the hell I am doing wrong but I'm ready to cry!! When I first got them I loved them, they were working great! I had refilled one about 4 times and I wasnt getting as much vapor as I was at first so I watched the GotVapes video and cleaned them. I decided to clean all 4 that I have had different juices in because that I could make them all like new. Well now none of them work right and I have no idea why!! I have the plugs in the right way and pushed down tightly and two of them are leaking still, and the other one ive managed to get it working but the vapor production is really weak. I have posted about my experience in the GotVapes forum and people have tried to help me and still they arent working!!!

 

[taterbugg]

Keep me informed on this one, that seems a bit strange for a simple CE3...

Yea I didn't think it did at this price point but I sure wish you could lock it like a lot of the VVs have. I have been noticing something (only with the one I'm using so far) and that is once in awhile the VV will jump to 5.0v and start flashing for no apparent reason and will not fire the cart. If I unscrew and then replace the cart it starts working again. This has happened 3-4 times today and with a CE3 and a DV C4+. Not sure what's up but I'm going to keep an eye on it.

I've had this same thing happen to mine. I thought at first it could be an adapter problem, because it only happened with the included adapter on it, but the adapter works fine on other pvs, and the carts/tanks work on other stuff. I tried a different adapter I have, same thing. I tried a stone 3 tank, it won't fire at all. The tanks that come with the kit do it a lot, and are touch and go with it, I thought the first one I tried was doa, but it works on other pvs, and same story with the other tank. But, I have another basic carto tank, and it works, great, in fact one of the best vapes I've ever had, hehehe, and a basic boge carto works awesome on it. I havn't tried a ce3, I will later after a new charge. So, other than this, the v8 is great so far, I love the vape, and the feel, and looks of it, so we'll see what develops with the issue? As others have said, the charger it comes with is not great, batts barely fit, and on my second charge with it, the batts didn't last very long. I'm charging now in my xtar charger, but only 1 at a time. (on a side note, Eric are you going to have extra spacers available anytime?, then I could charge 2!) I'll order a couple aw imrs, I'm sure they'll perform better.

 

[bigpman]

Thank you kindly, it will be on my next order

I bought this one a while back and it should fit the bill Xtra Large Case

 

[bigpman]

They should be the same CE3 XL that others carry. What have you tried so far? I'll tell you what works for me, pulling the coil up and lining it up with the slots. Most of mine came with the coil pushed down below the slots. This was causing the wicks to not properly cover the holes. It was also causing flooding. I took a paperclip and make a very small 90 degree angle at the end. I then placed it under one side of the coil and very gently pulled up. I repeated the process on the other side until the coil was even with the two slots. Once I did this, the vapor increased, the flavor increased and the flooding stopped completely. If you haven't tried this, give it a shot

I am so beyond frustrated with mine that I got from Got Vapes, the bottom coils!!! I dunno what the hell I am doing wrong but I'm ready to cry!! When I first got them I loved them, they were working great! I had refilled one about 4 times and I wasnt getting as much vapor as I was at first so I watched the GotVapes video and cleaned them. I decided to clean all 4 that I have had different juices in because that I could make them all like new. Well now none of them work right and I have no idea why!! I have the plugs in the right way and pushed down tightly and two of them are leaking still, and the other one ive managed to get it working but the vapor production is really weak. I have posted about my experience in the GotVapes forum and people have tried to help me and still they arent working!!!

 

[KalebK]

I have had no luck getting the tube to come off, I attached it to my pv and pulled with all my strength and it won't budge, will someone fix them for me if I mail them to you? Ill pay for shipping both ways!!

 

[harleydiva]

I have had no luck getting the tube to come off, I attached it to my pv and pulled with all my strength and it won't budge, will someone fix them for me if I mail them to you? Ill pay for shipping both ways!!

Just rock the tube back and forth instead of pulling.

 

[bigpman]

Exactly what harleydiva said Pulling straight up will not work, you need to pull up and to the sides, in a rocking motion, and it will come off, I promise

Just rock the tube back and forth instead of pulling.

 

[gormly]

I've had this same thing happen to mine. I thought at first it could be an adapter problem, because it only happened with the included adapter on it, but the adapter works fine on other pvs, and the carts/tanks work on other stuff. I tried a different adapter I have, same thing. I tried a stone 3 tank, it won't fire at all. The tanks that come with the kit do it a lot, and are touch and go with it, I thought the first one I tried was doa, but it works on other pvs, and same story with the other tank. But, I have another basic carto tank, and it works, great, in fact one of the best vapes I've ever had, hehehe, and a basic boge carto works awesome on it. I havn't tried a ce3, I will later after a new charge. So, other than this, the v8 is great so far, I love the vape, and the feel, and looks of it, so we'll see what develops with the issue? As others have said, the charger it comes with is not great, batts barely fit, and on my second charge with it, the batts didn't last very long. I'm charging now in my xtar charger, but only 1 at a time. (on a side note, Eric are you going to have extra spacers available anytime?, then I could charge 2!) I'll order a couple aw imrs, I'm sure they'll perform better.

I was just informed of this battery issue today, I didn;t want to open the kits because I had so little of them, but I should have.
They seem to have included a charger that is a wee bit too small for both batteries, the only solution I can come up with is an elastic band

they also say on the instructions that it comes with a bottle and a needle but none of the kits have them, so a manufacturer screw up all around.

 

[KalebK]

Hi Eric, I was just wondering, if I order early tomorrow morning, what are the chances of it getting shipped tomorrow??

 

[KalebK]

Exactly what harleydiva said Pulling straight up will not work, you need to pull up and to the sides, in a rocking motion, and it will come off, I promise

Thank you, ill try tomorrow. Im just way too fed up with it right now.

 

[tpoulton]

Do you have the eGo Vision Multi wicks. I believe they have 8 wicks in them. If not, which clearomizer would you say would work best with the eGo C twist?

Can Anyone help me with advice on which cartomizer or clearomizer would work best on the eGo Twist?

 

[GoAskAl]

Can Anyone help me with advice on which cartomizer or clearomizer would work best on the eGo Twist?

This Vision eGo CE4+ Clearomizer DV Edition has 4 "long" strans of wick material on each side. If you follow the link you can see it in the picture. I have never heard of them refered to as "eight strand" though. They are the v2 of the Vision eGo C4+ and they should work very well with the twist. The E1 Clearomizer - ReVive - v2 and the eGo CE5+ Rebuildable Clearomizer should also work well and all three fit over the eGo threads. Hope this helps.

 

[gormly]

Hi Eric, I was just wondering, if I order early tomorrow morning, what are the chances of it getting shipped tomorrow??

Did we already discus an order? I can't match up ecf names to people but I think we have yes? If so what you wanted is ready to go.


That said, should the chances it goes out today are good, but I have a drain pipe issue in my home, I have a guy coming over to help me fix it at 12:30PM so I will have a very short window of processing today (Friday) but I will do my best. It was not too busy last night for orders so it should go out.

Usually it's not a problem but I need to take advantage of my friend coming over because I have no idea where the leak is coming from, once we find it and figure out what we are going to do then I can process everything and get back to it later.

My wife is quite annoyed with not being able to take a shower

send me an email after the order and ask me to get to it quick if we haven't talked already

 

[wendallb]

Hey Eric, my order says awaiting payment that I paid two days ago..hope you are just behind. order 4420

If you don't show the payment let me know..

 

[bigpman]

Yikes! My wife would have already given me a swift kick in the rear!

Did we already discus an order? I can't match up ecf names to people but I think we have yes? If so what you wanted is ready to go.


That said, should the chances it goes out today are good, but I have a drain pipe issue in my home, I have a guy coming over to help me fix it at 12:30PM so I will have a very short window of processing today (Friday) but I will do my best. It was not too busy last night for orders so it should go out.

Usually it's not a problem but I need to take advantage of my friend coming over because I have no idea where the leak is coming from, once we find it and figure out what we are going to do then I can process everything and get back to it later.

My wife is quite annoyed with not being able to take a shower

send me an email after the order and ask me to get to it quick if we haven't talked already

 

[KalebK]

Did we already discus an order? I can't match up ecf names to people but I think we have yes? If so what you wanted is ready to go.


That said, should the chances it goes out today are good, but I have a drain pipe issue in my home, I have a guy coming over to help me fix it at 12:30PM so I will have a very short window of processing today (Friday) but I will do my best. It was not too busy last night for orders so it should go out.

Usually it's not a problem but I need to take advantage of my friend coming over because I have no idea where the leak is coming from, once we find it and figure out what we are going to do then I can process everything and get back to it later.

My wife is quite annoyed with not being able to take a shower

send me an email after the order and ask me to get to it quick if we haven't talked already

Thanks Eric, I hope the pipe gets fixed soon!!!

 

[KalebK]

Order placed, sent you an email. Waiting for invoice.O

 

[KalebK]

LOL too funny, right when I posted that I received the invoice. Invoice paid!

 

[Krispers]

got my cartos today....still ain't got no balls

but I put your business cards in the post office to get ya some orders

 

[gormly]

Not sure what happened yesterday/today but my orders have more than tripled!!
Figures, with a ceiling half down, my day job having "emergencies" and three people desperately needing their order.


Add to that WePays notices have been sporadic (sorry Wendall, I am packing it up now) it's been a tough day for sure.
Add to that we are out of paper towels, napkins, trash is full as always, there are empty100 boxes on the back porch, 2 bags of garbage, had to pick up the kids... and all of my stock had to be moved twice to make sure it didn't get anywhere near the demo...I am literally typing on top of stock items because I had to load this computer room up with all my stock!!

Ever have one of these days??
I'd almost rather have that bad tooth back... am thoroughly exhausted.

LOL...

If you had an order without liquids or flavorings (with one exception) it most likely went out today. (except for Wendall, again sorry about that)

needless to say I may not be on the rest of the day, just have to catch up, if someone has a question, please help me out today/tomorrow and answer if you can for me ~ Thanks!


The CE4's are all back in stock (oh yea, got a delivery too) they will be on the website in stock shortly.