Official DiscountVapers.com Thread
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
- Status
Hmmm, the only other thing I can think about is that your wick and coil is sitting too low. Pull it apart and check to see if the coil is sitting too low. You will know this by looking at the wicks. The wicks need to be level with the slots in the center tube. If the wicks sit at an upward angle, this can cause gurgling and leaking. Take a paperclip and make a small 90 degree angle on it. Place the angle under one of the sides of the coil and gently pull up. Repeat this on the other side of the coil until the wicks sit level with the slots. This should alleviate any leaking/gurgling issues.
Wendall, I've had this on a few of the CE3's.
Generally, if it leaks juice, either the wick is not blocking most of the wick hole because some of it is off to the side or is to far down in the cup, or it has a small air-leak at the silicone plug. Or, as is the case with 2 out of 5 my neighbor has that I can't figure out why it leaks, just a mystery lol.
I have found, that it is usually better to refill when they are about 3/4ths empty rather totally empty. I flick them so the juice is away from the wick openings, and refill. Also, they should only be filled to just below the wicks. Not filled completely.
Some drip tips are a tight fit, and can expand the tube a bit and cause the plug not to completely seal. I think what happens is without the tube squeezing the plug, sometimes the fill hole doesn't completely heal itself after filling. I've changed out the o-rings on several of my drip tips to a smaller size just for this reason.
If the wicks look right, try changing out the plug. I had one that the plug looked right, but just wouldn't seal. Swapped in a new plug and fixed it right up. No doubt the fill hole was not closing for whatever reason.
A few drops at the battery end from time to time is pretty much to be expected from any clearo/carto. But not leaking out and constant flooding of course.
Generally, if it leaks juice, either the wick is not blocking most of the wick hole because some of it is off to the side or is to far down in the cup, or it has a small air-leak at the silicone plug. Or, as is the case with 2 out of 5 my neighbor has that I can't figure out why it leaks, just a mystery lol.
I have found, that it is usually better to refill when they are about 3/4ths empty rather totally empty. I flick them so the juice is away from the wick openings, and refill. Also, they should only be filled to just below the wicks. Not filled completely.
Some drip tips are a tight fit, and can expand the tube a bit and cause the plug not to completely seal. I think what happens is without the tube squeezing the plug, sometimes the fill hole doesn't completely heal itself after filling. I've changed out the o-rings on several of my drip tips to a smaller size just for this reason.
If the wicks look right, try changing out the plug. I had one that the plug looked right, but just wouldn't seal. Swapped in a new plug and fixed it right up. No doubt the fill hole was not closing for whatever reason.
A few drops at the battery end from time to time is pretty much to be expected from any clearo/carto. But not leaking out and constant flooding of course.
I really wish the manufacturer would address this. They have a near perfect design that when put together properly, is about as good as it gets.
Crazy how people have such different experiences with the same product. Not only these but other items as well. I guess that is what makes us individuals
Crazy how people have such different experiences with the same product. Not only these but other items as well. I guess that is what makes us individuals
Very true. I have not had any of my ce3's to leak that I can remember. I got the original ones when they first came out. It seems like the more popular a carto becomes the worse the QC becomes on later versions.
I haven't used then a lot because they don't hold enough juice for me and they are too long and skinny for my mods without cones. They vape very good though.
Last edited:
Thanks for all the tips on the CE3's I will look at all the possibilites that have been posted..
PLEASE HELP ME OUT FOR A MINUTE
I am required by the credit card processing company to add an age verification to my website. I just implemented it, can a few people test it for me and see if you get the notice and tell me if it works.
I need to know as soon as possible.
Thank you!!
I am required by the credit card processing company to add an age verification to my website. I just implemented it, can a few people test it for me and see if you get the notice and tell me if it works.
I need to know as soon as possible.
Thank you!!
I am so excited.. I might actually get CC processing at a fair price (well fair being relative)
this is the last step.
Keep the tests coming please
Like to know different browsers if you can tell me
IE
Firefox
Chrome
Safari
this is the last step.
Keep the tests coming please
Like to know different browsers if you can tell me
IE
Firefox
Chrome
Safari
I am so excited.. I might actually get CC processing at a fair price (well fair being relative)
this is the last step.
Keep the tests coming please
Like to know different browsers if you can tell me
IE
Firefox
Chrome
Safari
We ALL are!
Chrome and IE9, both successful (here).
Almost forgot.. the Ovale V8 Rubberized Black and Rubberized White now in stock.
If I get CC Processing my life will be so much easier and I'll have more time to interact which is what I want to get back to doing more of fingers crossed.
fingers crossed.
Eric, and it will not verify age from my Android tablet or phone. The phone goes to mobile site and the tablet I tried on both desktop and mobile view.
Glad to hear that the processing is on its way. Like you said, it'll be easier for you and also for new customers
Glad to hear that the processing is on its way. Like you said, it'll be easier for you and also for new customers
- Status
Similar threads
- Locked
