Official DiscountVapers.com Thread

[me1969]

yes but this thing looks easy to rebuild so all the non moders that are thinking of getting into rebuilding this could be the one to try ,And if you get the pre wrapped coils if I'm correct it is just two screws .could be your way to get to a bigger market but of course just my

 

[gormly]

Sorry Eric...didn't mean to impose mass hysteria on you. I was just asking and then came to a personal decision that it may not be the best of things. Most of the products you sale are RTR (ready to run) so with a customer base that is counting on that will be turned off by some of the diy stuff. Also, I found your site b/c your prices are not matched and you offer the BEST customer service that I have found in my couple years of vaping. As one individual mentioned, $1k on a PV would turn me off and your products are very reasonable. With the reviews you have and other reviewers on the ECF,I purchase products based off this. So I guess in a nut shell, you provide what's best for your customers and that keeps me coming back. Thanks all

all suggestions are welcome, I am one of you guys, so you all show me a lot of stuff I wouldn't know about. This product is interesting but I've been burned a lot (products you don't see because I refuse to sell them) so if LD comes back with a favorable review I';ll get them, they told me I can buy the replacement parts so as long as I can get those and it's a decent item I'm in.

 

[gormly]

Got the T2's in today, colors, resistances and coil heads.

So happy!! Love these...
Plus I got the Kanger T0 bottom coil, very very nice out of the box.
Be sure to watch LD's review on in the description.
It's almost dead on except where he talks about spilling juice because you know.. he's clumsy.

I will post more when I get some time, I kinda hurt my back today, want to rest a bit.

I also have a New XL3 in stainless and a XL4

 

[MrPicC]

Dammit all these codes I have to look up. Eric your gonna make me broker then I already am. Need to stop following this thread

Sent from my SPH-D710 using Tapatalk 2

 

[bigpman]

Okay everyone. It's July 21st, so... it's my birthday. Come on Eric, what'd you get me???

Black rubberized V8? Gunmetal Vmax?

Happy belated Birthday!

 

[gormly]

Dammit all these codes I have to look up. Eric your gonna make me broker then I already am. Need to stop following this thread

Sent from my SPH-D710 using Tapatalk 2

you'll be in good company I am pretty much broke now too, lol so much product purchased last week.

 

[MrPicC]

Well its official, after trying clearos especially ce3s I hate all my DCTs. Which means all my spares are gonna sit here till I convince my girl to use them. Can't wait to try all the new stuff you sent me when it arrives tomorrow.

Sent from my SPH-D710 using Tapatalk 2

 

[Kyi]

T2's in colors?? Nice! I love stuff in different colors. What's the difference between the T2 and T0? And I guess the CE3 - 5 pack should be here soon as well? I can't decide what to get now. Should I just get some T2's/T0's or get the CE3? The filling method worries me a little, I can't seem to syringe juice out of the bottles very well and always end up making a mess.

 

[me1969]

T2's in colors?? Nice! I love stuff in different colors. What's the difference between the T2 and T0? And I guess the CE3 - 5 pack should be here soon as well? I can't decide what to get now. Should I just get some T2's/T0's or get the CE3? The filling method worries me a little, I can't seem to syringe juice out of the bottles very well and always end up making a mess.

I take the plunger out and pour it in syringe than put plunger in alittle and turn it upside down and plunge the air out .

 

[LordDavon]

Got the T2's in today, colors, resistances and coil heads.

So happy!! Love these...
Plus I got the Kanger T0 bottom coil, very very nice out of the box.
Be sure to watch LD's review on in the description.
It's almost dead on except where he talks about spilling juice because you know.. he's clumsy.

I will post more when I get some time, I kinda hurt my back today, want to rest a bit.

I also have a New XL3 in stainless and a XL4

Yup. It took me a little while to master the fill of the T0, but I have. No more mess.

 

[KalebK]

I take the plunger out and pour it in syringe than put plunger in alittle and turn it upside down and plunge the air out .

Thats genius! Thank you for sharing!!!

 

[KalebK]

I hope your back feels better soon Eric!!

 

[BuGlen]

I also have a New XL3 in stainless and a XL4

Okay, I'm intrigued. Please do tell!

 

[Kyi]

I take the plunger out and pour it in syringe than put plunger in alittle and turn it upside down and plunge the air out .

Now why didn't I think of that?? Thanks, I will try that next time!

 

[Zooker]

I take the plunger out and pour it in syringe than put plunger in alittle and turn it upside down and plunge the air out .

WHAT?!! Oh the filler award crown is goin' to you! I'm about ready to refill my CE3 in a minute here, I'm totally going to do that!! I've been dripping juice into a carto condom and syringing it out of there, it works, but it's slowwwww.

 

[LordDavon]

I take the plunger out and pour it in syringe than put plunger in alittle and turn it upside down and plunge the air out .

It's so simple, and genius at the same time. Kudos!

 

[caffeinator]

The filling method worries me a little, I can't seem to syringe juice out of the bottles very well and always end up making a mess.

I use the protective clear plastic cap from a hershey's syrup bottle to pour some juice into. Then, it's easy to fill the syringe and there is no air to worry about. Any excess gets poured back into the juice bottle or used to fill a carto.

Any small clear container would work though.

 

[jericoriver]

Eric do you have any of the 4 ohm in stock for the T2?

 

[gormly]

Okay, I'm intrigued. Please do tell!

The XL4 can turn into a stacked battery mod that allows up to 6V, I am getting confirmation on the exact stages of voltages because my meter is giving me 1.2, 2.2 reading and that's clearly not correct as it hits hard... and the colors do not match what they originally told me.

Now, I do NOT like stacked battery mods, so I am selling it as a single 18650 mod which gives you 3.7-4.2 depending on your battery, BUT it can be used with 2 18350's to reach the higher levels. Please read the description, I list my stance on the whole matter there. I do not wish to be involved with mods going boom (even if it is a very remote possibility) so anyone ordering must do so with the intent on using it with one battery.

I hope your back feels better soon Eric!!

it's worse today, hard getting to all the orders

Eric do you have any of the 4 ohm in stock for the T2?

see... I order a boatload of stuff and someone asks me for the one thing I don't have
seriously though, I ordered what they had available and 4.0 was not available.


***********


The T0 is a bottom coil, that is the difference between the T2 and the T0
For the fill of the T0 I use a syringe at an angle. no mess.
Same with the CE3, no mess, use a thin syringe and it's easy, just takes a bit of practice.

 

[LordDavon]

The XL4

Wait... there's an XL4??? Oh, do tell!