Official DiscountVapers.com Thread

Status
Not open for further replies.

tlmoody27

ECF Guru
ECF Veteran
Verified Member
May 9, 2012
12,870
46,687
Middle of No Where, GA
I'll try that on the carto. Thanks for the explanation on the clearos!!

The kanger t2 is diff from the rest vision 2.0 ,thor and vivi nova all take the same head .The lo on the ovale could be low resistance try a diff cart(or whatever you use) if you have one.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I'm sure this has been covered before here but if someone could either point me to the post or answer this for me I'd appreciate it! I'm confused about the difference in the Kanger T2, vision 2.0, and Thor. Are these pretty much the same thing? I thought I saw on here somewhere that one or all of these will take the same heads as well as the vivi nova head?? Thanks for any help!!

Oh, and also, my V8 keeps showing LO even though the batteries are fully charged. It's the batteries that came with it so do you think I just need new/better batteries?

Placing my DV order tomorrow so wanted to make sure I knew what I was ordering. :D

I've gotten conflicting reports from the manufacturer, in one case they told me LO means Low Battery and that is indeed what I get when my batteries are low and need charging, on another occasion they told me it was a too low res cartomizer, so I guess they could be using the same code for two different things. :(

One other thing to note is the quality of the charger you are using, if it is a lower quality or a lower v like a 3.6 you can get instances where your batteries will be trashed a lot quicker than if a higher end charger was being used.
I use the Xtar WP6 and I have not had any problems with my batteries. I have also used the Xtar WPII with great results, the cheapo I have is good and shouldn't kill your batteries at all but it's something to ponder. If you are going to use APV's for a while and have rechargeable batteries it is best to spring for a better charger.
 

tlmoody27

ECF Guru
ECF Veteran
Verified Member
May 9, 2012
12,870
46,687
Middle of No Where, GA
Thank you for replying about that. I'm trying a different carto and so far so good. The xtar wp6 and wpII don't list the 18350 on the list on your site. Will they work with the 18350? It would be good for me to use one of those since I have both 18650's and 18350's that I use. Do either one of those come with the spacers for the shorter batteries? If not, do you sell them? Thanks!

I've gotten conflicting reports from the manufacturer, in one case they told me LO means Low Battery and that is indeed what I get when my batteries are low and need charging, on another occasion they told me it was a too low res cartomizer, so I guess they could be using the same code for two different things. :(

One other thing to note is the quality of the charger you are using, if it is a lower quality or a lower v like a 3.6 you can get instances where your batteries will be trashed a lot quicker than if a higher end charger was being used.
I use the Xtar WP6 and I have not had any problems with my batteries. I have also used the Xtar WPII with great results, the cheapo I have is good and shouldn't kill your batteries at all but it's something to ponder. If you are going to use APV's for a while and have rechargeable batteries it is best to spring for a better charger.
 

cocoabellaRSD

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2012
2,792
2,684
67
Texas
I like them and think the flavor is good but honestly the flavor is about the same on all the top coil clearos to me. DV does have the new version with the improved caps. I haven't heard of anyone having cracking issues with them.

thanks tx (*;*) does the replacement coil screw in?
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Thank you for replying about that. I'm trying a different carto and so far so good. The xtar wp6 and wpII don't list the 18350 on the list on your site. Will they work with the 18350? It would be good for me to use one of those since I have both 18650's and 18350's that I use. Do either one of those come with the spacers for the shorter batteries? If not, do you sell them? Thanks!


Oh sorry, I meant to write MP2, not WPII
Xtar MP2 dual channel / Dual Voltage Charger - DiscountVapers.com

and the WP6 works with spacers, I am out of stock but will have them shortly.
 

bmrdave

Super Member
ECF Veteran
Verified Member
May 17, 2011
399
568
61
Irving, TX
I ordered today...I better get a smiley face bouncy ball or someone is gonna get hurt!!!!! LOL

No bouncy in this order. I am sad.

To Eric, the question still stands:
Any chance of a gunmetal Go-Go? and if not what adapter(s) do I need to get a Go-cart to work on a Bolt?
 

WA3PNT

Super Member
ECF Veteran
Verified Member
Jun 10, 2010
599
1,036
83
Chino Valley, AZ
www.rodeogeorge.com
When I got home, I had two DV Orders sitting on the workbench. Bmrdave, I not only had a GREEN Smiley Ball in one order, I had a RED LED Flashlight in the second order.

My first thought was, what do I need this flashlight for? Then when my ORANGE and GREEN Smiley Balls both rolled off the workbench, I see that Eric provides the flashlights to assist in finding the Smiley Balls that always roll under the furniture with the lowest ground clearance.

I'm sure the flashlights are less expensive than "glow in the dark" Smiley Balls.

RodeoGeorge
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
When I got home, I had two DV Orders sitting on the workbench. Bmrdave, I not only had a GREEN Smiley Ball in one order, I had a RED LED Flashlight in the second order.

My first thought was, what do I need this flashlight for? Then when my ORANGE and GREEN Smiley Balls both rolled off the workbench, I see that Eric provides the flashlights to assist in finding the Smiley Balls that always roll under the furniture with the lowest ground clearance.

I'm sure the flashlights are less expensive than "glow in the dark" Smiley Balls.

RodeoGeorge
:laugh::laugh::laugh:
 

bmrdave

Super Member
ECF Veteran
Verified Member
May 17, 2011
399
568
61
Irving, TX
When I got home, I had two DV Orders sitting on the workbench. Bmrdave, I not only had a GREEN Smiley Ball in one order, I had a RED LED Flashlight in the second order.

My first thought was, what do I need this flashlight for? Then when my ORANGE and GREEN Smiley Balls both rolled off the workbench, I see that Eric provides the flashlights to assist in finding the Smiley Balls that always roll under the furniture with the lowest ground clearance.

I'm sure the flashlights are less expensive than "glow in the dark" Smiley Balls.

RodeoGeorge

So that's how it's going to be, huh. Fine. I'll show Eric. I'll just order more stuff from him and see how he likes it!
 
Status
Not open for further replies.

Users who are viewing this thread