Official DiscountVapers.com Thread

Status
Not open for further replies.

sonicdsl

Wandering life's highway
Supporting Member
ECF Veteran
Verified Member
Aug 11, 2011
17,744
19,245
Ummm... did I do a bad when I was trying to get the bottom loose for dripping in juice upside down like I saw in that YouTube video? :blink:

mX16Z.jpg



:unsure: :shock: :cry:

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
Ummm... did I do a bad when I was trying to get the bottom loose for dripping in juice upside down like I saw in that YouTube video? :blink:

mX16Z.jpg



:unsure: :shock: :cry:

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
:ohmy: Sonics :ohmy: I'm so sorry honey ! I can't do the upside down thing with mine. I can't seem to slip it off like that. *****I have seen quite a few other people have the same result as you however***** :( They said they just soldered that wire back together and fixed it though. I use a syringe in the top through the wick hole to refill mine. It's a pain in the .... that way but I can't get mine off the other way and I'm afraid to do what you did so I don't even try anymore. I LOVE this tank though !!! It vapes beautiful.
 

KalebK

Vaping Master
ECF Veteran
Verified Member
Apr 2, 2012
3,181
5,526
Spokane, WA
Something very strange just happened. I think I may have mixed up my batteries by accident. I have 2 pairs of 18350s and always charge a set while the other set is in my V8. Well I got the low battery warning last night before bed and so I set the low pair aside so I could charge them this morning. I put them on the charger and went about my morning routine and looked over and one was already completely charged, which is odd since I got the low battery warning. I checked the voltage on the battery, 4.2... So then I checked the pair I had in my device since last night, one said 3.4 and the other said 4.0.... Now I am worried, what should I do?
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Ummm... did I do a bad when I was trying to get the bottom loose for dripping in juice upside down like I saw in that YouTube video? :blink:

mX16Z.jpg

:unsure: :shock: :cry:

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:

yikes... that looks bad :(
I bet LD would be able to give some advice here, I am at a loss other than trying to solder.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Something very strange just happened. I think I may have mixed up my batteries by accident. I have 2 pairs of 18350s and always charge a set while the other set is in my V8. Well I got the low battery warning last night before bed and so I set the low pair aside so I could charge them this morning. I put them on the charger and went about my morning routine and looked over and one was already completely charged, which is odd since I got the low battery warning. I checked the voltage on the battery, 4.2... So then I checked the pair I had in my device since last night, one said 3.4 and the other said 4.0.... Now I am worried, what should I do?


Put the device aside, charge all 4 batteries until you get full batt then meter them all see what you get?
 

sonicdsl

Wandering life's highway
Supporting Member
ECF Veteran
Verified Member
Aug 11, 2011
17,744
19,245
Ummm... did I do a bad when I was trying to get the bottom loose for dripping in juice upside down like I saw in that YouTube video? :blink:

mX16Z.jpg



:unsure: :shock: :cry:

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:

:ohmy: Sonics :ohmy: I'm so sorry honey ! I can't do the upside down thing with mine. I can't seem to slip it off like that. *****I have seen quite a few other people have the same result as you however***** :( They said they just soldered that wire back together and fixed it though. I use a syringe in the top through the wick hole to refill mine. It's a pain in the .... that way but I can't get mine off the other way and I'm afraid to do what you did so I don't even try anymore. I LOVE this tank though !!! It vapes beautiful.

yikes... that looks bad :(
I bet LD would be able to give some advice here, I am at a loss other than trying to solder.

Yeah, kinda figured this. Well I have zero soldering skills and not-so-steady hands, so I don't see that happening. :( I think I just burned my $$. I will have to order another then, unless LD or someone else has a better idea?

LD?? Help!!

:lol:
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
Yeah, kinda figured this. Well I have zero soldering skills and not-so-steady hands, so I don't see that happening. :( I think I just burned my $$. I will have to order another then, unless LD or someone else has a better idea?

LD?? Help!!

:lol:
I'd try and solder it for you but I can quite reach it from here honeys :laugh::laugh: I KNOW it can be fixed cuz other people did it. I tried to slide mine down again like that and it's too tight to move it :blink: I guess I'd better leave it alone huh ? :laugh: Don't throw it out. Does anyone who vapes live close to you that can solder it ?
 

KalebK

Vaping Master
ECF Veteran
Verified Member
Apr 2, 2012
3,181
5,526
Spokane, WA
Alright so an update on my battery fiasco, (see post 7464)I just got home and fully charged my 18350s... Two are measuring 4.2 and the other two are measuring 4.1. Those are ok voltages for fully charged batteries right??! I have both the 4.2s in my device right now and will use the others when these die.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Just a note:

I am not going anywhere

LOL, I may have given the wrong impression, I am not going out of business or thinking about closing up, I have had a bad month or two and it's been hard but I just had a few frustrating moments, I get over it pretty quickly.

sorry for making anyone think otherwise, I've gotten more than a few emails about it and thank you for all the kind words of support.

No worries, I am not going anywhere :)
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
Just a note:

I am not going anywhere

LOL, I may have given the wrong impression, I am not going out of business or thinking about closing up, I have had a bad month or two and it's been hard but I just had a few frustrating moments, I get over it pretty quickly.

sorry for making anyone think otherwise, I've gotten more than a few emails about it and thank you for all the kind words of support.

No worries, I am not going anywhere :)
Better not or we'll come find you :laugh::laugh::laugh: I used to live in CT it wouldn't be that hard to find you :laugh::laugh::laugh: j/k
 

LordDavon

Unregistered Supplier
ECF Veteran
Oct 3, 2010
5,981
9,756
Florida
www.discountvapers.com
Yeah, kinda figured this. Well I have zero soldering skills and not-so-steady hands, so I don't see that happening. :( I think I just burned my $$. I will have to order another then, unless LD or someone else has a better idea?

LD?? Help!!

:lol:

Sorry for the late response. I've been house hunting, and it is killing all of my spare time. You know, the time I dedicate to helping vapers, doing reviews, checking the forum, etc. But, I am still around. :)

Anyway, hit me up on Skype, and we can see what we can do. I know someone who has fixed that exact issue, so I may be able to get you two to connect. :)
 

WA3PNT

Super Member
ECF Veteran
Verified Member
Jun 10, 2010
599
1,036
83
Chino Valley, AZ
www.rodeogeorge.com
Hi Guys,
I know it was already brought up but here it comes again : any news of a DV banner?
I would love to celebrate my first totally smoke free month with a DV banner in my signature!!!

Yep... it's 1 month since I got my first package from Eric and it changed everything :vapor:

Congratulations on the first (I hope of many) months.

I'm at the 2-1/2 year point, after too many years of 2 packs a day. Morning cough that didn't quit until mid afternoon, and had no idea what anything taste like.

A whole new world, and Eric is now a major factor in it.

RodeoGeorge
 
Status
Not open for further replies.

Users who are viewing this thread