Official DiscountVapers.com Thread

[txtumbleweed]

I also purchased some of these from two different suppliers and the ones I got from Nhaler were too tight and I had to use a pair of pliers to get them off. I would make sure they fit good before I bought a big supply. I personaly didn't care for them and I like the stainless round ones best.

 

[GoodDog]

I like the stainless ones you carry now the best. I wouldn't waste my money on garbage if I were you. Seasoned vapers have learned to buy quality instead of junk they'll never use. Good quality at a good price is a winning combination for me.

 

[GoAskAl]

Hi y'all,
I just got off the New Member thread not long ago, but I follow this thread pretty faithfully and have read everything in it at least once. My daughter, Kimberly and I decided from the posts on here to order from Eric and to upgrade from our little gas station e-cigs directly to the Gogo, which we love. The only thing we miss is not having a way to just drop a few drops of a new flavor we have made up for taste testing as we only have a few cartos apiece right now and don't want to pull out the filler to try dripping, but we will manage.
Just wanted to drop by and tell everyone here how much I have learned from all your posts and how much she and I appreciate Eric and all he does for everyone.
Thanks, Eric for being the great supplier you are.
Ann

The best way I have found to test juices is to take a Go-go carto and gently pull the inner filler out leavintg the hard center tube. at that point you can drip 2-3 drops of juice in and vape away. If you want to take it to the next level what I did is cut the carto down so it is flush with the top of the cone, cut off the center tube so it's a little below the top of the carto and put on a drip tip. It looks really cool and is very functional.

​

 

[Major]

Plus 1 to the above! When you think about it, with the horizontal coil of the Go-carts, it's a win-win. You can use one until it has pretty much outlived itself for regualr vaping. Remove the filler and you have a "dripper" to test flavors with.

It makes great economic sense if you think about it. Around 2 bucks for a carto you most of the time can use for a long period of time and then extend that same 2 dollar investment into a taste tester for new juices. If it only prevented you from buying one regular sized bottle of a juice you got and didn;t like, it has more than paid for itself.

The vertical coils don't have this benefit obviously no matter how good they are when working as intended. Just another reason to love the Go-Go for me!

 

[wendallb]

anncq, if you don't want to pull the filler from a carto you can get a go-go to 510 adapter and a 510 atty with a drip tip for tasting..

 

[NC_Fog]

The best way I have found to test juices is to take a Go-go carto and gently pull the inner filler out leavintg the hard center tube. at that point you can drip 2-3 drops of juice in and vape away. If you want to take it to the next level what I did is cut the carto down so it is flush with the top of the cone, cut off the center tube so it's a little below the top of the carto and put on a drip tip. It looks really cool and is very functional.

View attachment 57371​

I cut my carto's down to the top of the cone also. Works Great!!!

 

[mohawkx]

The best way I have found to test juices is to take a Go-go carto and gently pull the inner filler out leavintg the hard center tube. at that point you can drip 2-3 drops of juice in and vape away. If you want to take it to the next level what I did is cut the carto down so it is flush with the top of the cone, cut off the center tube so it's a little below the top of the carto and put on a drip tip. It looks really cool and is very functional.

View attachment 57371​

Nice to see all the unique ideas you folks have come up with for the gogo horizontal coil carto.

 

[Chopper71]

I took one of my Go Go cartos and cut 5/8 of a inch off the top.Now its the size of a Boge regular carto.Trimmed the filler down and the center tube.Installed it in one of my tanks and WOW!!!! does it rock.Way more vapor and way more flavor.At least to me it does.I believe it hits like a my Boge LR carto in my 510 tank on my Riva battery.Throat hit is not on par with it as the Boge but everything else is.Throat hit is better then before though or at least it seems.The tank I made is a 3ml and it is great.

 

[Spazmelda]

How are you guys cutting the cartos? I tried using a (cheapie) tubing cutter. It said it would cut copper tubing, but I didn't make much progress on the carto with it. I have a diamond dremel wheel which I know would go through it. Is that the best way?

 

[Briachas]

I took one of my Go Go cartos and cut 5/8 of a inch off the top.Now its the size of a Boge regular carto.Trimmed the filler down and the center tube.Installed it in one of my tanks and WOW!!!! does it rock.Way more vapor and way more flavor.At least to me it does.I believe it hits like a my Boge LR carto in my 510 tank on my Riva battery.Throat hit is not on par with it as the Boge but everything else is.Throat hit is better then before though or at least it seems.The tank I made is a 3ml and it is great.

I have one of your tanks. Why would a cut down version have more vapor and flavor than the standard Go Carto?

 

[Chopper71]

How are you guys cutting the cartos? I tried using a (cheapie) tubing cutter. It said it would cut copper tubing, but I didn't make much progress on the carto with it. I have a diamond dremel wheel which I know would go through it. Is that the best way?

I use a small pipe cutter on mine and it works fine.

 

[Spazmelda]

I use a small pipe cutter on mine and it works fine.

Hmph. I guess I'm just a wimp then.

 

[Chopper71]

I have one of your tanks. Why would a cut down version have more vapor and flavor than the standard Go Carto?

I can only assume not so much filler for flavor to get thru and less distance for vapor to travel.Guessing not as much filler to absorb flavor and vapor.Here is a picture done on a cell phone so its not so great.The one in the middle is the one I'm talking about.Its actually smaller then Riva which is on the left and a tank with a normal Gocart on the right.I'm not suggesting anyone else do it.I just did it to one of mine.

 

[Briachas]

I'm not suggesting anyone else do it.I just did it to one of mine.

Hey, sounds like this may be the next big thing for you and Eric. I wouldn't mind trying this New and Improved Chopper Tank if it increases Vapor and Flavor. I'm sure others would agree.

 

[GoAskAl]

How are you guys cutting the cartos? I tried using a (cheapie) tubing cutter. It said it would cut copper tubing, but I didn't make much progress on the carto with it. I have a diamond dremel wheel which I know would go through it. Is that the best way?

I used a dremel on mine. I couldn't get my small tubbing cutter to work either so don't feel bad

 

[Devonmoonshire]

Seems like there are a lot of carto cutting questions here so I will offer the video for cutting the dual coils I use for the Dual Coil Tank system I use. A pretty easy how to wit the use of a Dremel

Hope you all can make some use of this:





Nate aka Darth Vapor

 

[wendallb]

Everywhere on this forum people are saying that the boge LR cartos are wonderful so got some to try....we will see...they are going to have to be good to be better than the go-go cartos..IMHO

 

[gormly]

Everywhere on this forum people are saying that the boge LR cartos are wonderful so got some to try....we will see...they are going to have to be good to be better than the go-go cartos..IMHO

I am trying to build up some $$$ to buy them, they didn't get back to me in a timely manner and I ended up buying more cartos

So I'll hopefully have enough shortly. My sales have slowed waaaay down, not sure what is up but hopefully I didn't do something wrong.

 

[wendallb]

Sales may be slow because of the payment issue Eric...I know it would not make any difference to the folks on this thread but others may be having a problem with it...Just a thought..

 

[sonicdsl]

Everywhere on this forum people are saying that the boge LR cartos are wonderful so got some to try....we will see...they are going to have to be good to be better than the go-go cartos..IMHO

I hear that too, but agree that the Go-Go's are superior to the Boges, IMHO. The Boge I got was... meh... ok. Didn't wow me. What did wow me was the LR 1.7 ohm SmokTech cartos! Those knocked me on my .... on the GoGo batt! I'd definitely get these again!

I am trying to build up some $$$ to buy them, they didn't get back to me in a timely manner and I ended up buying more cartos

So I'll hopefully have enough shortly. My sales have slowed waaaay down, not sure what is up but hopefully I didn't do something wrong.

I'm sure Wendall's right... We keep promoting you, and you have a good rank on Google... maybe it's cyclical? At any rate, I'll keep crossing fingers for the upswing!