Official DiscountVapers.com Thread

[kyaku]

You are too much Eric. Even though I'm TRYING to NOT buy anything else for a while, I keep coming back to your thread just to see what else you've dreamed up. Thanks for the grins.

 

[Cisme]

The one you are getting looks very sharp, Eric! I think the kitty looks best on blue or red. Guess I'm just not a fan of white for batts.

 

[gormly]

Something up with the website today? When I went to it this morning the products page seems to be "down" for lack of another term. On the home page the products listing is gone (although the learning section is still there) and when I select any of the product catagories from the home page (not the sidebar) or the 'products' tab at the top of the page it just perpetually loads (or, more specifically I just get the spinning icon). It could be a work thing since I was checking during my lunch but I don't remember that being the case before - and it hasn't been an issue with other vaping sites (both hardware and juice). Thanks - and don't mind the crazy in the corner if it turns out to be just me FWIW, we're on IE ver. 8 over here and I tend to use FireFox at home.

Not sure, seems ok to me, once in a while it gets a little finicky but i have a few orders this morning?

Try again?

You can always email me an order and I will PayPal invoice, it's not a problem.

 

[Bayemon]

Do you have a favorite team? I can make you a custom wrap team for the battery if you like.
My best friend has a printing business and he is getting in a custom printer that does vinyl graphics and cuts to size. I am going to offer this service in the future. I happen to like the Miami Dolphins (yes, long suffering fan) and he is making me one as soon as the new unit comes in.

Nebraska Cornhuskers. Die hard. A wrap like that would be so sweet...

 

[davedbc]

Thanks Gormly - I'll play with it more when I get home tonight since I have a feeling it's somehow a 'work' thing. If I'm still having issues - I'll be sure to let you know (and happily take you up on an email order).

 

[caillel]

Are you planning to get more go-go to 510 adapters in?
I missed the first proverbial boat.
And yes, your idea about dual coil+adapter=new order from me.

 

[gormly]

Nebraska Cornhuskers. Die hard. A wrap like that would be so sweet...

Your wish is my command...

Are you planning to get more go-go to 510 adapters in?
I missed the first proverbial boat.
And yes, your idea about dual coil+adapter=new order from me.

I never had them, I have the 510 to Go-go Cartomizer right now, the others should be here in a week or so.

Thanks Gormly - I'll play with it more when I get home tonight since I have a feeling it's somehow a 'work' thing. If I'm still having issues - I'll be sure to let you know (and happily take you up on an email order).

OK

 

[caillel]

So if they go as fast as the other.... I better keep an eye open.
Thanks

 

[davedbc]

And sure enough - got home from work and the website is working just fine - never mind my previous post - nothing to see here

Now I'll just be stalking, errm, checking the site for those sexy LCD batteries, and maybe some more black cones, a little of this - a little of that - who knows, it's not like I've saved any money by switching to vaping over smoking.

 

[gormly]

And sure enough - got home from work and the website is working just fine - never mind my previous post - nothing to see here

Now I'll just be stalking, errm, checking the site for those sexy LCD batteries, and maybe some more black cones, a little of this - a little of that - who knows, it's not like I've saved any money by switching to vaping over smoking.

LOL, I know what you mean, but it IS a lot more fun

According to DHL, cones will be here tomorrow.
You can back order if you like, no need to wait.

 

[tiraggi]

Hey Eric. I just emailed you regarding a stainless battery that just died on me today. Can you help me out on this?

Thanks, Tommy

 

[gormly]

Hey Eric. I just emailed you regarding a stainless battery that just died on me today. Can you help me out on this?

Thanks, Tommy

Of course, no problem at all.
I do not see the email, unless it's under a different name?

 

[tiraggi]

Its
tiraggi@msn.com
I sent it thru the contact us on the website.

Thanks

 

[gormly]

Its
tiraggi@msn.com
I sent it thru the contact us on the website.

Thanks

Email sent, please check



To everyone:
Does anyone know what the exact inner fabric is on the Go-go cartos? Not the fill, but the one wrapped around the center post?

I am thinking of starting a recycling (cleaning) service for cartomizers and I'd like to be able to get the inner wrap but I am not sure what it is. The outer wrap is easy. I have some "equipment" on the way to facilitate but anytime one is cleaned I'd want to put brand new fill inside.

 

[Bayemon]

Your wish is my command...

Oh.... that is so mine come next order...

 

[mohawkx]

New Product Alert:

Go-go Carto Cleaning Kit
Credit for this goes to mohawkx (great guy, great conversation)
Contains 1: Luer-Loc Control Syringe (10ml)
2 Cleaning Tubes with fitting grommet

Pictures coming soon.

This will allow you to clean the carto without removing the filler.
I will post more details when I have stock. I expect just a few business days as it is USA sourced.
it will be on the website later today for backorder (see below)

My Price will be: $5.49 (this depends on how much the grommets cost me)
It will go DOWN once I get cheaper sources, but it's still cheaper than anyone else.

Keep in mind, don't clean them too much, I do have a business to run


New Product Alert:
10ml Luer-Loc Syringe
(note: not a control syringe as above kit)
Price: $1.59 (no needle that's why it's cheap)
This is one of those items I can make some "profit" on so I can keep the other stuff lower
Also a few days out for delivery

Also I have an ordering Update.
I am opening up backorders. My cart isn't sophisticated enough to handle backorders listed properly so all products that are not in stock will be clearly labeled as such.
Later today all products will be available for ordering, anything on back order will be clearly marked.
Anything back ordered that includes other items will be shipped FREE. Meaning if you order a black carto pack (in stock) and blue carto pack (not in stock yet), you do not pay any extra shipping when the blue comes in.

Your hard earned money is never at risk, full refunds are given at any time no questions asked for backorders.

Actually I saw the cleaning kit on another thread and immediately bought a couple. I figure I can get two or three cleanings out of a carto without pulling the filler. Works good.

 

[gormly]

Actually I saw the cleaning kit on another thread and immediately bought a couple. I figure I can get two or three cleanings out of a carto without pulling the filler. Works good.

Thanks for the tip

 

[mohawkx]

Thanks for the tip

Actually, updating the rebuild method a bit, my new strategy is to use these carto cleaner kits to flush out the gocarts 2 or three times for reuse and then just pull the filler after that to remove built up gunk and do the dryburn to refresh the coil. After that I'll just repack the old carto with Fluval and use it until it dies. You don't need the cotton sleeve when you use Fluval as the Fluval wicks very well.
I'm also waiting on the new gogo tank modifications chopper and cegary are making to pack the gogo(with tank) with fluval and see how that works also. My feelings with the tanks is that the top way to build these successfully is to use a new gocart, pull the filler, drill the hole for the juice entry and then just pack it with fluval and the tank should work very well. I'm just waiting impatiently for the tanks I paid for to be built and shipped to me. Seems there are supply problems, order flooding and other hang ups at this point in time. though.

 

[gormly]

My feelings with the tanks is that the top way to build these successfully is to use a new gocart, pull the filler, drill the hole for the juice entry and then just pack it with fluval and the tank should work very well. I'm just waiting impatiently for the tanks I paid for to be built and shipped to me. Seems there are supply problems, order flooding and other hang ups at this point in time. though.

That's what I was thinking, two small opposing holes (not too big) to draw in liquid
My only thing is I have done some side by side tests with the Fluval and No cotton vs cotton and in my opinion, I like it better with the poly replaced with Fluval but with the cotton still wrapped.

I can't sell them as they are someones else's custom mod idea (and I wouldn't do that without permission), but I can sure make some for myself

 

[mohawkx]

Hmmmmm, fluval with the cotton still wrapped..........Hmmmmmm. Sounds like the ultimate gogo tank solution. Thanks for the tip.