Official DiscountVapers.com Thread
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
- Status
A GREAT sale Eric! I wish I could take advantage of it, but unfortunately funds are a bit low right now.
I've been looking for a good deal on a kit because there's a lady at my office who is showing interest, but is, let's just say, less fortunate. But maybe another time. Thanks for the sale though!!
Does the Holiday Sale last until Christmas Eve at 11:59pm or Christmas at 11:59pm?
I'm using and abusing that 3 for 2 flavor deal - and my relatives still send me money in greeting cards even though I'm 30. I won't complain
Damn I want that Stainless GoGo kit at that price. I should have gotten that instead of black because a few drops from my pocket when getting out of the car has put some nicks in it already. Oh well. My first kit was supposed to be a learning experience... collect em all, right?
I'm using and abusing that 3 for 2 flavor deal
- and my relatives still send me money in greeting cards even though I'm 30. I won't complain Damn I want that Stainless GoGo kit at that price. I should have gotten that instead of black because a few drops from my pocket when getting out of the car has put some nicks in it already. Oh well. My first kit was supposed to be a learning experience... collect em all, right?
LOL, typo, sorry, just got a new keyboard today and still getting used to it.
LOL... had to tease a little
Feeling any better this morning? Hope so!!!
Does the Holiday Sale last until Christmas Eve at 11:59pm or Christmas at 11:59pm?
I'm using and abusing that 3 for 2 flavor deal
Damn I want that Stainless GoGo kit at that price. I should have gotten that instead of black because a few drops from my pocket when getting out of the car has put some nicks in it already. Oh well. My first kit was supposed to be a learning experience... collect em all, right?
Collect them all is my motto!
The stainless kit... yikes I am out of stainless cartos
so if you wanted it I will extend the sale for a day or so if you need it. But it would come with black cartos, I am waiting on a shipment...
But technically it is over on Christmas when I get a chance that night to take it offline, probably 10PM or so.
and no today was worse than yesterday for the sickness, but hopefully better tomorrow.
so if you wanted it I will extend the sale for a day or so if you need it. But it would come with black cartos, I am waiting on a shipment...
But technically it is over on Christmas when I get a chance that night to take it offline, probably 10PM or so.
and no today was worse than yesterday for the sickness, but hopefully better tomorrow.
The stainless kit... yikes I am out of stainless cartos
so if you wanted it I will extend the sale for a day or so if you need it. But it would come with black cartos, I am waiting on a shipment...
But technically it is over on Christmas when I get a chance that night to take it offline, probably 10PM or so.
and no today was worse than yesterday for the sickness, but hopefully better tomorrow.
Thanks Eric! Get better soon!!
I got a stuffy cold yesterday and now my head is totally clogged... maybe it's going around in the forums
Pounding 'emergen-C' and water for now. A toast to our health lol.
Maybe need to stay away from the forums, I don't have it yet...hehe
Hope everyone gets well soon
Hmmm - Well, I don't have it, but my son got it. And he doesn't hang out in the forum. Could be that I'm a carrier? Guess I ought to stay away so no one else gets sick ...
The Eagle has Landed the Eagle has Landed. I have the package and will be Modifying them ASAP.
One thing I want to ask everyone is what is your preference? My Personal preference is minimal adjustment so that it will fot over the carto with just enough room for a decent airflow. This does not allow it to fit over the stock drip tips however. In order to fit them over the stock Drip tips I must go down a little further which allows for plenty of airflow but a little bit more space between the carto and the cone.
So Which does everyone prefer?
Nate aka Darth Vapor
One thing I want to ask everyone is what is your preference? My Personal preference is minimal adjustment so that it will fot over the carto with just enough room for a decent airflow. This does not allow it to fit over the stock drip tips however. In order to fit them over the stock Drip tips I must go down a little further which allows for plenty of airflow but a little bit more space between the carto and the cone.
So Which does everyone prefer?
Nate aka Darth Vapor
Not sure what you mean, can't you just screw on the cone and then insert the carto? Best of both worlds?
Yeppers, you hit the nail right on the head. That was what I was looking to find out. If you wanted them so the base will fit through or just the top because the base is wider than the top
I shall get them all done asap and then get them to the Post office WOO HOO Project Day For Me
Nate aka Darth Vapor
Yeppers, you hit the nail right on the head. That was what I was looking to find out. If you wanted them so the base will fit through or just the top because the base is wider than the top
WOO HOO Project Day For Me
Nate aka Darth Vapor
If you are looking for projects take a trip to the East coast and I (my wife) will find plenty for you
Yea, if only I could find someone to make higher quality tank stoppers instead of what I am forced to use now
You can have THAT job if you want LOL.
I am looking to improve the tank design and lower the cost significantly
This is NOT a reflection on you know who (don't want to associate his name here and get him in trouble)
He does good work, it's just time for a step up.
I also want to take this opportunity to tell anyone who has purchased a tank in the last 30 days or so and is not satisfied that I will replace it free of charge on the next order you place. (stock providing)
No questions asked, I trust you all not to take advantage just to get a free tank so I will just assume that if you ask, there is a problem. Just enter the order number in the comment and ask for a replacement tank, you won't get the carto, but you'll get all the parts.
I have worked pretty hard to find new methods of making them and I am a lot better now.
I am getting higher quality tank poly next week and even found a better way to make it overfill proof.
Instead of the large cut hole in the center with a separate stopper (that deteriorates over time) a small hole where the top stopper is (between the grooves) is much better for back pressure and liquid flow, plus no possibility of leaking and overfill on the carto. It does make it a tad harder to fill as you have to push up on the bottom a bit to be able to fill but the overall effect is much better. I have been vaping on three for the last week with ZERO leaks, ZERO overfills and no loss of taste. The purpose of the hole is to allow some of the air pressure to be released when pushing down on the top stopper instead of the pressure forcing the liquid up into the tank which can cause leaking and overflow. You can use the tiny hole to fill with a syringe (with the top stopper pulled out slightly) or just pull it up farther and drip.
NOTE: Because I have limited time now, if anyone finds a nice professional way to stopper the tanks and it works, I will give you 5 FREE tanks including spare cartos for the effort.
Don't get me wrong, what I use now works fine, but I want it to be cosmetically better and perhaps easier.
I've seen some sweet looking tanks out there and mine just don't measure up yet in the looks department.
You can have THAT job if you want LOL.
I am looking to improve the tank design and lower the cost significantly
This is NOT a reflection on you know who (don't want to associate his name here and get him in trouble)
He does good work, it's just time for a step up.
I also want to take this opportunity to tell anyone who has purchased a tank in the last 30 days or so and is not satisfied that I will replace it free of charge on the next order you place. (stock providing)
No questions asked, I trust you all not to take advantage just to get a free tank so I will just assume that if you ask, there is a problem. Just enter the order number in the comment and ask for a replacement tank, you won't get the carto, but you'll get all the parts.
I have worked pretty hard to find new methods of making them and I am a lot better now.
I am getting higher quality tank poly next week and even found a better way to make it overfill proof.
Instead of the large cut hole in the center with a separate stopper (that deteriorates over time) a small hole where the top stopper is (between the grooves) is much better for back pressure and liquid flow, plus no possibility of leaking and overfill on the carto. It does make it a tad harder to fill as you have to push up on the bottom a bit to be able to fill but the overall effect is much better. I have been vaping on three for the last week with ZERO leaks, ZERO overfills and no loss of taste. The purpose of the hole is to allow some of the air pressure to be released when pushing down on the top stopper instead of the pressure forcing the liquid up into the tank which can cause leaking and overflow. You can use the tiny hole to fill with a syringe (with the top stopper pulled out slightly) or just pull it up farther and drip.
NOTE: Because I have limited time now, if anyone finds a nice professional way to stopper the tanks and it works, I will give you 5 FREE tanks including spare cartos for the effort.
Don't get me wrong, what I use now works fine, but I want it to be cosmetically better and perhaps easier.
I've seen some sweet looking tanks out there and mine just don't measure up yet in the looks department.
Last edited:
Not sure if I can figure out a tank stopper but Mission number one is accomplished LOL. Just putting the finishing touches on the tip ends and then they will be packed up and on their way home
Nate aka Darth Vapor
Nate aka Darth Vapor
Just got a review on my Pizza Bread Sticks liquid:
"So...got the juice. Holy cow is that breadsticks good man. It actually reminds me of when I was in high school and would go to Pizza Hut and get breadsticks and they had that cheaper fluffy parmesan cheese that would kind of ball up on the sticks. Was my favorite part. Well done sir."
"So...got the juice. Holy cow is that breadsticks good man. It actually reminds me of when I was in high school and would go to Pizza Hut and get breadsticks and they had that cheaper fluffy parmesan cheese that would kind of ball up on the sticks. Was my favorite part. Well done sir."
I was beginning to think you didn't look at reviews anymore or sump'n....left one for the lemonade (my FAV juice ever btw!) awhile back and it never posted...
~Patti
- Status
Similar threads
- Locked
