Official DiscountVapers.com Thread

[sonicdsl]

Brutus, did you get permission to remove the gagball and apologize? i dont think so.....drop and gimme 50, cartos that is

Warned ya Eric!

 

[Krispers]

I need some sort of disclosure in my siggy lol

 

[gormly]

Pina Colada is back in stock!

also BerryBomb and all the berry flavors.

 

[Brutus Buckeye]

Got my shipping notice already, so far I'm liking your style Eric!

 

[gormly]

Got my shipping notice already, so far I'm liking your style Eric!

I try my best to get everything packed and ready to go within a few hours unless I am sleeping or working.
(I think my record is 11 minutes from order to Post Office)

Orders sitting in the queue gives me the shakes.

 

[GoodDog]

You guys will be spoiled rotten not only by his prices but by his customer service!!!!!

 

[Brutus Buckeye]

Good to hear that GoodDog. I was spoiled by my last vendor but recently things have gone south for him. I wish him the best but things are not being handled well so for at least now it was time to find supplies. So far I'm impressed. I'm loyal to a fault sometimes but I have to do what is best for me, and unfortunately Krispers comes with me. LOL I will be recommending other more savory characters, I promise.

 

[Bostonsnboxers]

Got my shipping notice already, so far I'm liking your style Eric!

And he's always that way! Ya gotta love it

 

[Krispers]

Good to hear that GoodDog. I was spoiled by my last vendor but recently things have gone south for him. I wish him the best but things are not being handled well so for at least now it was time to find supplies. So far I'm impressed. I'm loyal to a fault sometimes but I have to do what is best for me, and unfortunately Krispers comes with me. LOL I will be recommending other more savory characters, I promise.

I taste like chicken....nothing more savory than I

 

[gormly]

Good to hear that GoodDog. I was spoiled by my last vendor but recently things have gone south for him. I wish him the best but things are not being handled well so for at least now it was time to find supplies. So far I'm impressed. I'm loyal to a fault sometimes but I have to do what is best for me, and unfortunately Krispers comes with me. LOL I will be recommending other more savory characters, I promise.

Hey, invite anyone you want, we have a lot of characters here and we can always use a few more

 

[gormly]

The Mini XL3's have tested well with the AW batteries I have now.
I can get a full 4.2v (green) for quite a while on a full charge.

I also skinned a few.

These are just vinyl stickers, they look nice but probably won't last a lifetime just so you know.
I am offering them wrapped at 1.00 extra

Unfortunately this weekend didn't go so well, my friend who does the vinyl printing has decided to stop doing it due to financial issues. So all he could do was give me some plain colored sheets to use.

 

[Briachas]

Do the lights and voltage change automatically as the battery discharges? If you set it to 4.2v (Green) can you just leave it there and it will drop through the other levels as it drains?

 

[gormly]

Do the lights and voltage change automatically as the battery discharges? If you set it to 4.2v (Green) can you just leave it there and it will drop through the other levels as it drains?

Yes, it will just drop automatically to the next lowest level.

 

[Sdh]

I have a question about the Vision 510 clear clearomizer. It states on website 2.5ml but the description states 3.5ml capacity. Which one is it? 2.5 or 3.5 ? These are the ones with LED lights. TIA

 

[salemgold]

I have a question about the Vision 510 clear clearomizer. It states on website 2.5ml but the description states 3.5ml capacity. Which one is it? 2.5 or 3.5 ? These are the ones with LED lights. TIA

Yep, I just ordered thinking it was 3.5 ml because the site says this

Product Description
Vision 3.5ml Capacity Clear Clearomizer with Blue LED
2.8 - 3.0ohm

Lights up when you apply power!

2.5ml capacity can last you all day without changing Clearomizers. Easy drip access holes means you can use ANY syringe or drip method to fill.

Now I am not sure

 

[gormly]

Yep, I just ordered thinking it was 3.5 ml because the site says this

Product Description
Vision 3.5ml Capacity Clear Clearomizer with Blue LED
2.8 - 3.0ohm

Lights up when you apply power!

2.5ml capacity can last you all day without changing Clearomizers. Easy drip access holes means you can use ANY syringe or drip method to fill.

Now I am not sure

Ugg, so sorry, I made a serious typo.
ALL the clearomizers with LED lights are 2.5 not 3.5.

If anyone wants to cancel an order let me know.

 

[salemgold]

Ugg, so sorry, I made a serious typo.
ALL the clearomizers with LED lights are 2.5 not 3.5.

If anyone wants to cancel an order let me know.

No problem at all. Mistakes happen to the best of us Thanks for being so easy to contact and canceling my order for me

 

[Tetsab]

that's a pain for sure.
If you have some goof-off it helps but only after a tiny bit is peeled and obviously don't get it in the carto LOL
you putting them in a tank or just don't like black?

I think I recollect a post somewhere (either here in ECF or possibly elsewhere, sorry!) about removing sticker coats from cartos which suggested that sticking them in the freezer for a couple of hours THEN peeling them was very much easier and more effective than either just picking at 'em with your fingernails or using solvents. I think the notion was that the actual adhesive itself would freeze and then basically just crack off without leaving a heap of residue behind.

I hope this isn't just my dodgy memory but is indeed a genuine recollection and might be helpful for anyone looking to do this! At least it's a cost-free method which could be worth trying out on a 'nothing ventured' basis.

And BTW Eric, before you go beating yourself up about any typos or even out & out goofs, just remind yourself there's only ONE kind of person who never makes any mistakes.


... someone who never does any WORK!!!!!

 

[gormly]

I think I recollect a post somewhere (either here in ECF or possibly elsewhere, sorry!) about removing sticker coats from cartos which suggested that sticking them in the freezer for a couple of hours THEN peeling them was very much easier and more effective than either just picking at 'em with your fingernails or using solvents. I think the notion was that the actual adhesive itself would freeze and then basically just crack off without leaving a heap of residue behind.

I hope this isn't just my dodgy memory but is indeed a genuine recollection and might be helpful for anyone looking to do this! At least it's a cost-free method which could be worth trying out on a 'nothing ventured' basis.
:

When I get these back in stock I am going to try that AND the exact opposite, the heat gun
I'll report which is more effective.

 

[yo vapo]

Will you be selling the new longer Boge 2.0s?